FC0603E1000BTBST1 Vishay

FC www.vishay.com Vishay Dale Thin Film High Frequency (Up to 40 GHz) Resistor, Thin Film Surface Mount Chip FEATURES Small standard size 0402 case size Edge trimmed block resistors Available High purity alumina substrate Available Ohmic range (10 to 1000 ) Small internal reactance (< 10 m) Available Low TCR (down to 25 ppm/C) Available Epoxy bondable termination available Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For LINKS TO ADDITIONAL RESOURCES example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details S-Parameters Infographics APPLICATIONS Low noise amplifiers FC series chip resistors are designed with low internal Attenuation reactance. They function as almost pure resistors on a very high range of frequencies. The specialized laser edge Line termination trimming allows for precision tolerances to 0.1 %. STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Resistance Range 10 to 1000 Case size dependent TCR: Absolute 25 ppm/C to 100 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 5.0 % +25 C Stability: Absolute R 0.02 % 2000 h at 70 C Stability: Ratio -- Voltage Coefficient 0.1 ppm/V - Working Voltage 30 V to 75 V - Operating Temperature Range -55 C to +155 C - Storage Temperature Range -55 C to +155 C - Noise < -35 dB - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C COMPONENT RATINGS CASE SIZE POWER RATING (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0402 50 30 10 to 1000 0505 125 37 20 to 1000 0603 125 50 10 to 1000 0805 200 50 10 to 1000 1005 250 75 10 to 1000 1206 330 75 10 to 1000 Revision: 08-Mar-2021 Document Number: 60093 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 FC www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches (millimeters) CASE WIDTH THICKNESS TOP PAD BOTTOM PAD D LENGTH SIZE W ( 0.005) T ( 0.0015) D ( 0.005) E ( 0.005) T 0.042 0.008 0.022 0.015 0.010 0.010 0402 (1.067 0.203) (0.559) (0.381) (0.254) (0.254) E 0.055 0.006 0.050 0.015 0.010 0.015 0505 L (1.397 0.152) (1.270) (0.381) (0.254) (0.381) DT 0.064 0.006 0.032 0.015 0.012 0.015 0603 (1.626 0.152) (0.813) (0.381) (0.305) (0.381) 0.080 0.006 0.050 0.015 0.016 0.008 0.015 0805 W (2.032 0.152) (1.270) (0.381) (0.406 0.203) (0.381) 0.105 0.008 0.050 0.015 0.015 0.015 1005 (2.667 0.203) (1.270) (0.381) (0.381) (0.381) 0.126 0.008 0.063 0.015 0.020 + 0.005/- 0.010 1206 L (3.200 0.203) (1.600) (0.381) (0.508 + 0.127/- 0.254) MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Alumina Terminations Pre-soldered or gold Lead (Pb)-free Option 96.5 % Sn, 3.0 % Ag, 0.5 % Cu Tin/Lead Option Sn63 Lead (Pb)-free Finish and Tin / Lead Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: FC1206E1001BBTS FC 1 20 6 E 1 0 0 1BB T S FC 1 20 6 K 1 0 0 0 BT B ST S GLOBAL CASE TCR TERMINATION RESISTANCE TOLERANCE PACKAGING MODEL SIZE CHARACTERISTIC (1, 2 or 3 digits) FC 0402 E = 25 ppm/C The first 3 digits are B = 0.1 % T = top sided Au (gold) term BS = BULK 0505 H = 50 ppm/C D = 0.5 % Au over Ni epoxy bondable 100 min., 1 mult. significant figures 0603 K = 100 ppm/C F = 1 % RoHS-compliant - e4 WS = WAFFLE and the last digit 0805 G = 2 % B = wraparound Sn/Pb solder 100 min., 1 mult. specifies the 1005 J = 5 % 63 % Sn/37 % Pb with nickel number of zeros 1206 barrier TAPE AND REEL to follow. R G = wraparound Au over Ni (gold) T0 = 100 min., 100 mult. designates the termination epoxy bondable T1 = 1000 min., (1) decimal point. RoHS-compliant - e4 1000 mult. TB = top sided Sn/Pb solder T3 = 300 min., 300 mult. 63 % Sn/37 % Pb with nickel T5 = 500 min., 500 mult. Example: barrier TF = full reel 10R0 = 10 TBS = top sided lead (Pb)-free TS = 100 min., 1 mult. 1000 = 100 solder with nickel barrier 1001 = 1 k RoHS-compliant - e1 S = wraparound lead (Pb)-free solder 96.5 % Sn/3.0 % Ag/0.5 %Cu RoHS-compliant - e1 Historical Part Number Example: FC1206E1001BBT (for reference purposes only) FC 1206 E 1001 B B T TCR SERIES CASE SIZE RESISTANCE TOLERANCE TERMINATION PACKAGING CHARACTERISTIC Note (1) Preferred packaging code Revision: 08-Mar-2021 Document Number: 60093 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000