G16 www.vishay.com Vishay Dale Rack and Panel Connectors Side Mount FEATURES Body components available with any desired pin and socket combination Floating contacts aid in withstanding vibration Locking device permits secure mount of individual sections or complete component G16P-AB G16P-AB MATERIAL SPECIFICATIONS Standard Body: Glass-filled diallyl phthalate per ASTM APPLICATIONS D 5948-96 green, flame retardant Broad - limited only by those applications requiring physical, Pin Contacts: Brass electrical and/or materials specifications exceeding those Socket Contacts: Phosphor bronze indicated. Contact Plating: Gold, 10 micro-inches ELECTRICAL SPECIFICATIONS PHYSICAL SPECIFICATIONS Current Rating: 13 A Minimum Creepage between Contacts: 0.20 5.16 mm Breakdown Voltage (Contact to Contact): Minimum Air Space between Contacts: 0.16 3.97 mm At sea level: 4000 V RMS Maximum Wire Size: 16 AWG At 70 000 feet 21 336 meters : 550 V RMS DIMENSIONS in inches millimeters G16S-AB G16P-AB 0.218 0.218 5.54 5.54 0.44 0.44 11.1 11.1 0.250 Body 0.250 6.35 6.35 0.75 0.53 13.5 0.062 1.59 Solder Cup 19.1 Dia. Typ. 16 AWG Wire 0.25 6.35 0.25 6.35 0.089 2.26 Dia. thru 82 CSK Pin Contact 0.089 2.26 Dia. thru 82 0.34 0.203 5.16 Dia. Socket CSK 0.203 5.16 Dia. 8.7 C Ring Both Sides, Contact Both Sides, 1 Hole 1 Hole 0.34 0.53 8.7 13.5 ORDERING INFORMATION AB S B G16 P A BODY STYLE CONTACT VARIATIONS MODEL G16 - Side Mount with 2 P - Pin style body. S - Socket style body. Designates pin contact positions in positions for 16 AWG contacts These designators are used to identify mating G16P connector and socket contact connectors. If designator 3 is the same, a positions in a G16S connector connector designated G16P will mate with a connector designated G16S EXAMPLE 1: EXAMPLE 2: EXAMPLE 3: EXAMPLE 4: G16P-AB = Connector with pin G16S-AB = Connector with socket G16P-A = Connector with pin G16S-A = Connector with socket contacts in position A and B contacts in positions A and B contact in position A and a contact in position A and a pin (would mate with Example 1 at left) socket contact in position B contact in position B (would mate with Example 3 at left) Revision: 30-Jun-14 Document Number: 36019 1 For technical questions, contact: connectors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customers responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 Document Number: 91000 1