End of Life January-2018 - Alternative Device: CNY17
H11B1, H11B2, H11B3
www.vishay.com
Vishay Semiconductors
Optocoupler, Photodarlington Output, High Gain,
With Base Connection
FEATURES
1 6
A B Isolation test voltage: 4420 V
RMS
Coupling capacitance, 0.5 pF
C 5 C
2
Material categorization:
3 4 for definitions of compliance please see
NC E
www.vishay.com/doc?99912
i179005
AGENCY APPROVALS
UL1577, file no. E52744
DESCRIPTION
cUL tested to CSA 22.2 bulletin 5A
The H11B1, H11B2, H11B3 are industry standard
optocouplers, consisting of a gallium arsenide infrared LED DIN EN 60747-5-5 (VDE 0884-5) available with option 1
and a silicon photodarlington.
FIMKO EN60065, EN60950-1
CQC: GB8898-2011, GB4943.1-2011
ORDERING INFORMATION
DIP
H 1 1 B # - X 00#
PART NUMBER PACKAGE OPTION
7.62 mm
Option 7 Option 9
> 0.1 mm
> 0.7 mm
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, FIMKO, CQC > 500 > 200 > 100
DIP-6 H11B1 H11B2 H11B3
(1)
SMD-6, option 7 H11B1-X007T --
(1)
SMD-6, option 9 H11B1-X009 H11B2-X009T -
UL, FIMKO, CQC, VDE > 500 > 200 > 100
SMD-6, option 7 H11B1-X017 - -
Notes
Additional options may be possible, please contact sales office.
(1)
Also available in tubes, no T in the end.
ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
INPUT
Reverse voltage V 3V
R
Forward continuous current I 60 mA
F
Power dissipation P 100 mW
diss
Derate linearly from 25 C 1.33 mW/C
OUTPUT
Collector emitter breakdown voltage BV 25 V
CEO
Emitter collector breakdown voltage BV 7V
ECO
Collector base breakdown voltage BV 30 V
CBO
Collector current (continuous) I 100 mA
C
Power dissipation P 150 mW
diss
Derate linearly from 25 C 2mW/C
Rev. 1.8, 23-Jul-15 Document Number: 83609
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000End of Life January-2018 - Alternative Device: CNY17
H11B1, H11B2, H11B3
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION SYMBOL VALUE UNIT
COUPLER
Total package dissipation (LED plus detector) P 260 mW
tot
Derate linearly from 25 C 3.5 mW/C
Storage temperature T -55 to +150 C
stg
Operating temperature T -55 to +100 C
amb
Lead soldering time at 260 C 10 s
Note
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
INPUT
H11B1 V -1.1 1.5 V
F
I = 50 mA
F
Forward voltage H11B2 V -1.1 1.5 V
F
I = 10 mA H11B3 V -1.1 1.5 V
F F
Reverse current V = 3 V I - - 10 A
R R
Junction capacitance V = 0 V, f = 1 MHz C -50 - pF
F j
OUTPUT
Collector emitter breakdown voltage I = 1 mA, I = 0 mA BV 30 - - V
C F CEO
Emitter collector breakdown voltage I = 100A, I = 0 mA BV 7- - V
E F ECO
Collector base breakdown voltage I = 100 A, I = 0 mA BV 30 - - V
C F CBO
Collector emitter leakage current V = 10 V, I = 0 mA I - - 100 nA
CE F CEO
COUPLER
Saturation voltage collector-emitter I = 1 mA, I = 1 mA V -- 1 V
F C CEsat
Capacitance (input to output) C -0.5 - pF
IO
Note
Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements
CURRENT TRANSFER RATIO (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT
H11B1 CTR 500 %
DC
DC current transfer ratio V = 5 V, I = 1 mA H11B2 CTR 200 %
CE F DC
H11B3 CTR 100 %
DC
SWITCHING CHARACTERISTICS (T = 25 C, unless otherwise specified)
amb
PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT
t 5s
on
= 5 mA, V = 10 V, R = 100
Switching times I
F CE L
t 30 s
off
Rev. 1.8, 23-Jul-15 Document Number: 83609
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000