HV1812Y821KXMATHV Vishay

HV High Voltage Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications FEATURES Excellent reliability and thermal shock performance High voltage breakdown compared to standard design High reliable serial electrode design Protective surface coating may be required to prevent surface arcing Polymer termination available for intensive, board flex requirements Wet build process Reliable Noble Metal Electrode (NME) system Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Input filter capacitors Output filter capacitors Snubber capacitors reduce MOSFET voltage spikes Filtering for switching power supplies For lighting and other AC applications please contact: mlcc vishay.com ELECTRICAL SPECIFICATIONS C0G (NP0) X7R GENERAL SPECIFICATION GENERAL SPECIFICATION Note Note Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Operating Temperature: -55 C to +125 C Capacitance Range: 10 pF to 3.3 nF Capacitance Range: 150 pF to 15 nF Voltage Range: 3000 V , 4000 V , 5000 V Voltage Range: 3000 V , 4000 V , 5000 V , 6000 V DC DC DC DC DC DC DC Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC): 0 ppm/C 30 ppm/C from -55 C to +125 C 15 % from -55 C to +125 C, with 0 V applied DC Dissipation Factor (DF): Dissipation Factor (DF): 0.1 % maximum at 1.0 V and 1 MHz for value 1000 pF 2.5 % maximum at 1.0 V and 1 kHz RMS RMS 0.1 % maximum at 1.0 V and 1 kHz for values > 1000 pF RMS Insulating Resistance: Insulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less Aging Rate: 1 % maximum per decade Aging Rate: 0 % maximum per decade Dielectric Strength Test: Dielectric Strength Test: applied test voltages applied test voltages 3000 V - / 4000 V - / 5000 V - / 6000 V -rated: DC DC DC DC 3000 V - / 4000 V - / 5000 V -rated: min. 120 % of rated voltage DC DC DC 120 % of rated voltage Revision: 03-Apr-2019 Document Number: 45228 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 HV High Voltage Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA MAXIMUM VOLTAGE CAPACITANCE DIELECTRIC CASE (V) MINIMUM MAXIMUM 1812 5000 15 pF 1.0 nF 1825 5000 33 pF 2.2 nF C0G (NP0) 2220 5000 33 pF 2.2 nF 2225 5000 47 pF 3.3 nF 1812 6000 150 pF 3.9 nF 1825 6000 470 pF 10 nF X7R 2220 6000 470 pF 10 nF 2225 6000 470 pF 15 nF Note Detail ratings see Selection Chart ORDERING INFORMATION (2) HV2220 Y 152 K X M A T HV CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC MARKING PACKAGING PROCESS CODE NOMINAL TOLERANCE VOLTAGE CODE (1) CODE RATING 1812 Y = X7R Expressed in C0G (NP0): X = Ni barrier H = 3000 V A = HV = 1825 A = C0G picofarads (pF). F = 1 % 100 % tin plated V = 4000 V unmarked high voltage 2220 (NP0) The first two G = 2 % matte finish M = 5000 V 2225 digits are J = 5 % B = polymer 6 = 6000 V T = 7 reel / plastic tape significant, K = 10 % 100 % tin plated R = 11 1/4 / 13 reel / the third is a matte finish plastic tape multiplier. X7R: Examples J = 5 % 152 = 1500 pF K = 10 % M = 20 % Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc vishay.com (2) Process code with 2 digits has to be added ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes B Polymer layer, 100 % tin plated matte finish Yes Yes DIMENSIONS in inches (millimeters) W L T MAX. P TERMINATION PAD MAXIMUM LENGTH WIDTH (P) CASE CODE STYLE THICKNESS (L) (W) (T) MINIMUM MAXIMUM 0.177 0.012 0.126 0.008 1812 HV1812 0.106 (2.70) 0.010 (0.25) 0.035 (0.90) (4.50 0.30) (3.20 0.20) 0.177 0.012 0.252 0.010 1825 HV1825 0.106 (2.70) 0.010 (0.25) 0.035 (0.90) (4.50 0.30) (6.40 0.25) 0.220 0.010 0.200 0.010 2220 HV2220 0.106 (2.70) 0.010 (0.25) 0.037 (0.95) (5.59 0.25) (5.08 0.25) 0.220 0.010 0.250 0.010 2225 HV2225 0.106 (2.70) 0.010 (0.25) 0.037 (0.95) (5.59 0.25) (6.35 0.25) Note Polymer layer (B termination) have increased dimensions: length 0.006 (0.15 mm) Revision: 03-Apr-2019 Document Number: 45228 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000