T95R476K035CSSL Vishay

T95 www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors, TANTAMOUNT, Hi-Rel COTS, Conformal Coated FEATURES High reliability Weibull grading available Surge current testing per MIL-PRF-55365 Available options available Available Standard and low ESR options Terminations: SnPb, standard, 100 % tin available Available All cases except R case are halogen-free Available Material categorization: PERFORMANCE / ELECTRICAL for definitions of compliance please see CHARACTERISTICS www.vishay.com/doc 99912 www.vishay.com/doc 40209 Operating Temperature: -55 C to +125 C Note (above 85 C, voltage derating is required) * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For Capacitance Range: 0.15 F to 680 F example, parts with lead (Pb) terminations are not RoHS-compliant. Capacitance Tolerance: 20 %, 10 % standard Please see the information / tables in this datasheet for details Voltage Rating: 4 V to 50 V DC DC Moisture Sensitivity Level 2a ORDERING INFORMATION T95 D 107 K 010 E A A S TYPE CASE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION AND RELIABILITY SURGE ESR CODE TOLERANCE RATING AT +85 C PACKAGING LEVEL CURRENT See This is K = 10 % This is expressed Sn / Pb solder A = 1.0 % Weibull A = 10 cycles S = std. (1) Ratings expressed M = 20 % in volts. To B = 0.1 % Weibull at +25 C L = low E = 7 (178 mm) (1) and in picofarads. complete the C = 0.01 % Weibull reels B = 10 cycles Case The first two three-digit block, S = hi-rel standard L = 7 (178 mm) at -55 C / Codes digits are the zeros precede burn-in reel +85 C table. significant the voltage rating. Z = non-established S = 3 cycles figures. The A decimal point reliability at +25 C 100 % tin third is the is indicated by C = 7 (178 mm) number of an R reels zeros to (6R3 = 6.3 V). H = 7 (178 mm) follow. reel Notes (1) Weibull 0.1 % and 0.01 % may not be available on all ratings. See detailed notes in ratings table or contact marketing for availability We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limits after mounting DIMENSIONS in inches millimeters Tantalum wire nib identifie s anode (+) W terminal L MAX. B D J REF. J MAX. MAX. A H CASE CODE L (MAX.) W H A B D (REF.) J (MAX.) 0.143 0.072 0.008 0.048 0.008 0.023 0.010 0.085 0.015 0.115 0.004 S 3.63 1.83 0.20 1.22 0.20 0.58 0.25 2.16 0.37 2.9 0.10 0.143 0.104 0.010 0.051 0.010 0.023 0.010 0.085 0.015 0.115 0.004 V 3.63 2.65 0.25 1.30 0.25 0.58 0.25 2.16 0.37 2.9 0.10 0.146 0.072 0.012 0.056 0.012 0.031 0.012 0.085 0.016 0.115 0.004 A 3.7 1.8 0.3 1.4 0.3 0.8 0.3 2.2 0.40 2.9 0.10 0.158 0.110 + 0.012 / - 0.016 0.075 + 0.012 / - 0.024 0.031 0.012 0.097 0.016 0.138 0.004 B 4.0 2.8 + 0.3 / - 0.4 1.9 + 0.3 / - 0.6 0.8 0.3 2.5 0.40 3.5 0.10 Revision: 17-Jul-2018 Document Number: 40081 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 T95 www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters CASE CODE L (MAX.) W H A B D (REF.) J (MAX.) 0.285 0.104 0.010 0.051 0.010 0.040 0.020 0.200 0.027 0.243 0.004 X 7.24 2.65 0.25 1.30 0.25 1.00 0.50 5.08 0.69 6.2 0.10 0.285 0.104 0.010 0.069 0.010 0.040 0.020 0.200 0.027 0.243 0.004 Y 7.24 2.65 0.25 1.75 0.25 1.00 0.50 5.08 0.69 6.2 0.10 0.285 0.104 0.010 0.104 0.010 0.040 0.020 0.200 0.027 0.243 0.004 Z 7.24 2.65 0.25 2.65 0.25 1.00 0.50 5.08 0.69 6.2 0.10 0.281 0.126 0.012 0.098 0.012 0.051 0.012 0.180 0.024 0.236 0.004 C 7.1 3.2 0.3 2.5 0.3 1.3 0.3 4.6 0.60 6.0 0.10 0.293 0.170 + 0.012 / - 0.024 0.110 0.012 0.051 0.012 0.180 0.024 0.253 0.004 D 7.4 4.3 + 0.3 / - 0.6 2.8 0.3 1.3 0.3 4.6 0.60 6.4 0.10 0.283 0.235 + 0.012 / - 0.024 0.136 + 0.012 / - 0.016 0.051 0.012 0.180 0.024 0.243 0.004 R 7.20 6.0 + 0.30 / - 0.60 3.50 + 0.30 / - 0.40 1.30 0.30 4.60 0.60 6.2 0.10 Note The anode termination (D less B) will be a minimum of 0.010 (0.25 mm) RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.15 S 0.22 S 0.33 SS 0.47 S 0.68 SS 1.0 SS 1.5 SS V 2.2 S S V X 3.3 S S V 4.7 S S V X X Z / C 6.8 S S VA / XX Y Z C / D 10 S V X X Y C / Y Z R 15 V X B / X B / Y Z Z C / D / R R 22 X X Y B / Z Z R R 33 X Z Z D / R R 47 Y Y Z R D / R R 68 Y RD / R 100 Z Z R C / D R R 120 D / R R 150 D / R D R 180 R R 220 D / R D / R R 270 D 330 R C D / R R 390 R 470 D R 680 R R Revision: 17-Jul-2018 Document Number: 40081 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000