IL300 www.vishay.com Vishay Semiconductors Linear Optocoupler, High Gain Stability, Wide Bandwidth FEATURES Couples AC and DC signals 0.01 % servo linearity 8 C 1 NC Wide bandwidth, > 200 kHz 7 A 2 NC High gain stability, 0.005 %/C typically K1 K2 C 3 6 C Low input-output capacitance Low power consumption, < 15 mW A 4 5 A Isolation rated voltage 4420 V i179026 2 RMS V Internal insulation distance, > 0.4 mm DE Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Power supply feedback voltage / current DESCRIPTION Medical sensor isolation The IL300 linear optocoupler consists of an AlGaAs IRLED Audio signal interfacing irradiating an isolated feedback and an output PIN photodiode in a bifurcated arrangement. The feedback Isolated process control transducers photodiode captures a percentage of the LEDs flux and Digital telephone isolation generates a control signal (I ) that can be used to servo the P1 LED drive current. This technique compensates for the AGENCY APPROVALS LEDs non-linear, time, and temperature characteristics. UL The output PIN photodiode produces an output signal (I ) P2 cUL that is linearly related to the servo optical flux created by the LED. DIN EN 60747-5-5 (VDE 0884-5) available with option 1 The time and temperature stability of the input-output BSI coupler gain (K3) is insured by using matched PIN FIMKO photodiodes that accurately track the output flux of the LED. CQC ORDERING INFORMATION DIP-8 Option 6 I L 300 - D E F G - X 0 T 10.16 mm 7.62 mm PART NUMBER K3 BIN PACKAGE OPTION TAPE AND Option 7 Option 9 REEL > 0.1 mm > 0.7 mm AGENCY CERTIFIED / K3 BIN PACKAGE UL, cUL, 0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061 BSI, FIMKO DIP-8 IL300 IL300-DEFG - - IL300-EF - IL300-E IL300-F DIP-8, 400 mil, IL300-X006 IL300-DEFG-X006 - - IL300-EF-X006 IL300-FG-X006 IL300-E-X006 IL300-F-X006 option 6 (1) (1) (1) (1) SMD-8, option 7 IL300-X007T IL300-DEFG-X007T IL300-EFG-X007 IL300-DE-X007T IL300-EF-X007T IL300-FG-X007T IL300-E-X007T IL300-F-X007T (1) (1) (1) (1) SMD-8, option 9 IL300-X009T IL300-DEFG-X009T - - IL300-EF-X009T - - IL300-F-X009T VDE, UL, 0.557 to 1.618 0.765 to 1.181 0.851 to 1.181 0.765 to 0.955 0.851 to 1.061 0.945 to 1.181 0.851 to 0.955 0.945 to 1.061 BSI, FIMKO DIP-8 IL300-X001 IL300-DEFG-X001 - - IL300-EF-X001 - IL300-E-X001 IL300-F-X001 DIP-8, 400 mil, IL300-X016 IL300-DEFG-X016 IL300-EFG-X016 - IL300-EF-X016 - - IL300-F-X016 option 6 (1) (1) (1) SMD-8, option 7 IL300-X017 IL300-DEFG-X017T - - IL300-EF-X017T - IL300-E-X017T IL300-F-X017T (1) SMD-8, option 9 - - - - - - IL300-E-X009T IL300-F-X019T Note (1) Also available in tubes, do not put T on the end Rev. 2.0, 05-Mar-18 Document Number: 83622 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IL300 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Power dissipation P 160 mW diss Derate linearly from 25 C 2.13 mW/C Forward current I 60 mA F Surge current (pulse width < 10 s) I 250 mA PK Reverse voltage V 5V R Thermal resistance R 470 K/W th Junction temperature T 100 C j OUTPUT Power dissipation P 50 mW diss Derate linearly from 25 C 0.65 mW/C Reverse voltage V 50 V R Thermal resistance R 1500 K/W th Junction temperature T 100 C j COUPLER Total package dissipation at 25 C P 210 mW tot Derate linearly from 25 C 2.8 mW/C Storage temperature T -55 to +150 C stg Operating temperature T -55 to +100 C amb Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT (LED EMITTER) Forward voltage I = 10 mA V - 1.25 1.50 V F F V temperature coefficient V /C - -2.2 - mV/C F F Reverse current V = 5 V I -1 - A R R Junction capacitance V = 0 V, f = 1 MHz C -15 - pF F j Dynamic resistance I = 10 mA V /I -6 - F F F OUTPUT Dark current V = -15 V, I = 0 A I - 1 25 nA det F D Open circuit voltage I = 10 mA V - 500 - mV F D Short circuit current I = 10 mA I - 120 - A F SC Junction capacitance V = 0 V, f = 1 MHz C -12 - pF F j -14 Noise equivalent power V = 15 V NEP - 4 x 10 -W/Hz det COUPLER Input-output capacitance V = 0 V, f = 1 MHz - 1 - pF F K1, servo gain (I /I)I = 10 mA, V = -15 V K1 0.006 0.012 0.017 P1 F F det (1)(2) Servo photocurrent I = 10 mA, V = -15 V I - 120 - A F det P1 K2, forward gain (I /I)I = 10 mA, V = -15 V K2 0.006 0.012 0.017 P2 F F det Forward current I = 10 mA, V = -15 V I - 120 - A F det P2 (1)(2) K3, transfer gain (K2/K1) I = 10 mA, V = -15 V K3 0.56 1 1.65 K2/K1 F det Transfer gain stability I = 10 mA, V = -15 V K3/T - 0.005 0.15 %/C F det A I = 1 mA to 10 mA K3 - 0.25 - % F Transfer gain linearity I = 1 mA to 10 mA, T = 0 C to 75 C - 0.5 - % F amb Rev. 2.0, 05-Mar-18 Document Number: 83622 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000