IL4116 Vishay

333 3 IL4116, IL4117, IL4118 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Zero Crossing, Very Low Input Current FEATURES Low trigger current I = 0.7 mA (typ.) FT 1 6 MT2 A I = 300 mA TRMS High static dV/dt 10 000 V/s C 5 2 NC Load voltage up to 800 V Zero voltage crossing detector 3 ZCC* 4 NC MT1 Material categorization: *Zero crossing circuit for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Solid-state relay 23128 Lighting controls LINKS TO ADDITIONAL RESOURCES Temperature controls Solenoid / valve controls 3D Models Design Tools Related Models Footprints AC motor drives / starters Documents AGENCY APPROVALS Schematics UL cUL DESCRIPTION DIN EN 60747-5-5 (VDE 0884-5) available with option 1 The IL4116, IL4117, and IL4118 product family consists of CSA an optically coupled GaAs IRLED to a photosensitive FIMKO thyristor system with integrated noise suppression and zero crossing circuit. The thyristor system enables low trigger currents of 0.7 mA and features a dV/dt ratio of greater than 10 kV/s and load voltages up to 800 V. The IL4116, IL4117, and IL4118 product family is a perfect microcontroller friendly solution to isolate low voltage logic from high voltage 120 V , 240 V , and 380 V lines and AC AC AC to control resistive, inductive, or capacitive AC loads like motors, solenoids, high power thyristors or TRIACs, and solid-state relays. ORDERING INFORMATION DIP Option 6 I L 41 1 - X 0 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE Option 7 Option 9 AND REEL > 0.7 mm > 0.1 mm AGENCY CERTIFIED / PACKAGE PEAK OFF-STATE VOLTAGE V (V) DRM UL, cUL, FIMKO 600 700 800 DIP-6 IL4116 IL4117 IL4118 DIP-6, 400 mil, option 6 - - IL4118-X006 (1) (1) SMD-6, option 7 IL4116-X007T IL4117-X007 IL4118-X007T (1) SMD-6, option 9 IL4116-X009T - IL4118-X009T VDE, UL, cUL, FIMKO 600 700 800 SMD-6, option 7 - - IL4118-X017 Notes Additional options may be possible, please contact sales office (1) Also available in tubes, do not put T on the end Rev. 1.9, 04-Dec-2020 Document Number: 83628 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D IL4116, IL4117, IL4118 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Surge current I 2.5 A FSM Power dissipation P 100 mW diss Derate linearly from 25 C 1.33 mW/C Thermal resistance R 750 C/W th OUTPUT IL4116 V 600 V DRM Peak off-state voltage IL4117 V 700 V DRM IL4118 V 800 V DRM RMS on-state current I 300 mA DRM Single cycle surge 3A Power dissipation P 500 mW diss Derate linearly from 25 C 6.6 mW/C Thermal resistance R 150 C/W th COUPLER Storage temperature T -55 to +150 C stg Operating temperature T -55 to +100 C amb Lead soldering temperature 5 s T 260 C sld Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability Rev. 1.9, 04-Dec-2020 Document Number: 83628 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000