TLP161J TOSHIBA Photocoupler GaAs IRED & Photo-Triac TLP161J Triac Drive Unit: mm Programmable Controllers AC-Output Module Solid State Relay The TOSHIBA mini flat coupler TLP161J is a small outline coupler, suitable for surface mount assembly. The TLP161J consists of a photo triac, optically coupled to a gallium arsenide infrared emitting diode. Zero-voltage crossing turn-on Peak off-state voltage: 600 V (min) Trigger LED current: 10 mA (max) On-state current: 70 mA (max) Isolation voltage: 2500 Vrms (min) UL recognized: UL1577, file No. E67349 JEDEC Pin Configurations JEITA TOSHIBA 11-4C3 1 6 1: Anode Weight: 0.09 g (typ.) 3: Cathode 4: Terminal 1 6: Terminal 2 3 ZC 4 Trigger LED Current Trigger LED Current (mA) Marking of Classification (*) V = 6 V, Ta = 25C T Classification Min Max (IFT7) 7 T7 Standard 10 T7, Blank *: Ex. (IFT7): TLP161J (IFT7) Note: Application type name for certification test, please use standard product type name, i.e. TLP161J (IFT7): TLP161J 1 2010-10-01 TLP161J Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating I /C 0.7 mA/C F (Ta 53C) LED Peak forward current I 1 A FP (100 s pulse, 100 pps) Reverse voltage V 5 V R Junction temperature T 125 C j Off-state output terminal voltage V 600 V DRM Ta = 25C 70 On-state RMS I mA T(RMS) current Ta = 70C 40 On-state current derating I /C 0.67 mA/C T (Ta 25C) Detector Peak on-state current I 2 A TP (100 s pulse, 120 pps) Peak nonrepetitive surge current I 1.2 A TSM (PW = 10 ms) Junction temperature T 115 C j Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 100 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 min., R.H. 60%) BV 2500 Vrms S (Note) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note: Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together. Recommended Operating Conditions Characteristics Symbol MinTyp.MaxUnit Supply voltage V 240 Vac AC Forward current I 15 20 25 mA F Peak on-state current I 1 A TP Operating temperature T 25 85 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. 2 2010-10-01