ILD1206T, ILD1207T www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package, 100 C Rated FEATURES A1 8C Two channel coupler C2 7E SOIC-8 surface mountable package A3 6C Standard lead spacing of 0.05 C4 5E Available only on tape and reel option (conforms to EIA standard 481-2) i179018-1 V Isolation test voltage, 4000 V DE RMS i179074 Compatible with dual wave, vapor phase and IR reflow LINKS TO ADDITIONAL RESOURCES soldering Operating temperature from - 55 C to + 110 C Lead (Pb)-free component Related Documents Material categorization: for definitions of compliance DESCRIPTION please see www.vishay.com/doc 99912 The 100 % rated ILD1206T and ILD1207T are opticall y APPLICATIONS coupled pairs with a Gallium Arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a AC adapters DC level, can be transmitted by the device while maintaining PLCs a high degree of electrical isolation between input an d Switch mode power supplies output. DC/DC converters The ILD1206T and ILD1207T come in a standard SOIC-8 Microprocessor I/O interfaces small outline package for surface mounting which makes it ideally suited for high density applications with limited General impedance matching circuits space. In addition to eliminating through-holes requirements, this package conforms to standards for AGENCY APPROVALS surface mounted devices. UL / cUL 1577 A specified minimum and maximum CTR allows a narrow DIN EN 60747-5-5 (VDE 0884), available with option 1 tolerance in the electrical design of the adjacent circuits. Th e high BV of 70 V gives a higher safety margin compared CEO to the industry standard of 30 V. ORDERING INFORMATION SOIC-8 IL D 1 2 0 T PART NUMBER 6.1 mm CTR (%) AGENCY CERTIFIED / PACKAGE 10 mA UL, cUL, VDE 63 to 125 100 to 200 SOIC-8 ILD1206T ILD1207T Note For additional information on the available options refer to option information Rev. 2.0, 16-Apr-2021 Document Number: 83599 1 For technical questions, contact: optocoupler.answers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 ILD1206T, ILD1207T www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage V 6V R Peak pulsed voltage 1 s, 300 pps 1 A Continuous forward current per channel 30 mA Power dissipation P 50 mW diss Derate linearly from 25 C 0.5 mW/C OUTPUT Collector emitter breakdown voltage BV 70 V CEO Emitter collector breakdown voltage BV 7V ECO Power dissipation per channel P 125 mW diss Derate linearly from 25 C 1.25 mW/C COUPLER Isolation test voltage t = 1 min V 3333 V ISO RMS Total package dissipation ambient P 300 mW tot (2 LEDs and 2 detectors, 2 channels) Derate linearly from 25 C 4mW/C Storage temperature T -55 to +150 C stg Operating temperature T -55 to +110 C amb Soldering time from 260 C T 10 s sld Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum rating for extended periods of the time can adversely affect reliability 150 120 Phototransistor 90 IR - Diode 60 30 0 0 20 40 60 80 100 120 17544 Ambient Temperature (C) Fig. 1 - Power Dissipation vs. Ambient Temperature Rev. 2.0, 16-Apr-2021 Document Number: 83599 2 For technical questions, contact: optocoupler.answers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P (mW) total