MIC www.vishay.com Vishay Electro-Films Thin Film Microwave Resistor FEATURES Wire bondable High frequency Small single chip size: 0.020 x 0.040 Case: 0402 Microwave resistance range: 20 to 500 Overall resistance range: 2 to 20 k Alumina substrate Low stray capacitance: < 0.2 pF Resistor material: Tantalum nitride, self passivating Product may not be to scale Moisture resistant Material categorization: for definitions of compliance The MIC resistor chips on alumina are designed with low please see www.vishay.com/doc 99912 shunt capacitance. Most lower value resistor geometrics are APPLICATIONS compatible with strip lines, making them ideally suited for Vishay EFI MIC chip resistors provide excellent microwave circuits. high-frequency response and are ideally suited for These chips are manufactured using Vishay Electro-Films prototyping. (EFI) sophisticated Thin Film equipment and manufacturing Typical application areas are: technology. The MICs are 100 % electrically tested and Amplifiers visually inspected to MIL-STD-883. Oscillators Attenuators Couplers Filters TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER VALUE UNIT Resistance Range 2 to 20K Tolerances 1 % TCR 25, 50, 100, 200 ppm/C Note Only 20 to 500 are standard strip line designs for microwave applications Tightest Tolerance Available 1.0 % 25 ppm/C 50 ppm/C 100 ppm/C 200 ppm/C 2 10 20 5 k 10 k 15 k 20 k STANDARD ELECTRICAL SPECIFICATIONS PARAMETER VALUE UNIT Noise, MIL-STD-202, Method 308 -20 typ. dB Moisture Resistance, MIL-STD-202, Method 106 0.1 max. R/R % Stability, 1000 h, +125 C, 62 mW 0.2 max. R/R % Operating Temperature Range -55 to +125 C Thermal Shock, MIL-STD-202, Method 107, Test Condition F 0.1 max. R/R % High Temperature Exposure +150 C, 1000 h 0.2 max. R/R % Dielectric Voltage Breakdown 400 V 12 Insulation Resistance 10 min. Operating Voltage 100 max. V DC Power Rating at +70 C (Derated to Zero at 150 C) 0.125 max. W 5x Rated Power Short-Time Overload, +25 C, 5 s 0.1 max. R/R % Revision: 03-Feb-17 Document Number: 61037 1 For technical questions, contact: efi vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MIC www.vishay.com Vishay Electro-Films DIMENSIONS in inches 0.020 0.020 0.020 0.040 0.040 0.040 0.010 0.010 0.010 0.012 0.012 0.012 TYPICAL RANGE TYPICAL RANGE TYPICAL RANGE 20 to 20 k 2 to 6 6.2 to 19 SCHEMATIC IMPEDANCE VS. FREQUENCY 50 , 20 mil x 40 mil SIZE 50.40 50.30 50.20 50.10 50.00 49.90 49.80 49.70 49.60 0.00 E + 00 5.00 E + 08 1.00 E + 09 1.50 E + 0.9 2.00 E + 09 2.50 E + 09 3.00 E + 09 3.50 E + 09 FREQUENCY (Hz) MECHANICAL SPECIFICATIONS PARAMETER Chip Size 0.020 x 0.040 0.003 (0.5 mm x 1.0 mm 0.076 mm) Chip Thickness 0.010 0.002 (0.254 mm 0.05 mm) Chip Substrate Material 99.6 % alumina, 2 to 4 finish Resistor Material Tantalum nitride, self-passivating Bonding Pad Size 0.010 x 0.012 (0.254 mm x 0.30 mm) min. Number of Pads 2 Pad Material 25 k minimum gold standard Backing None GLOBAL PART NUMBER INFORMATION Global Part Number: MIC5000BKKMSNHWS Global Part Number Description: MIC 50 10 %, 100 ppm/C, MIC trim, SnPb termination, no back metal, class H, WS MI C 5 0 00 B K K M S N HW S RESISTANCE TOL. TCR TRIM BACK VISUAL PACKAGING MODEL RESISTANCE MULTILPLIER CODE TERMINATION (ppm/C) STYLE METAL CLASS CODE CODE (%) MIC First 4 C = 0.001 F = 1.0 E = 25 M = microwave G = Au G = Au H = class H WS = digits are B = 0.01 G = 2.0 C = 50 S = standard S = SnPb N = none K = class K waffle pack 20 x 40 significant A = 0.1 H = 2.5 K = 100 A = Al 100 min, size figures of 0 = 1 J = 5.0 L = 200 T = lead (Pb)-free 1 mult microwave resistance 1 = 10 K = 10 R = 0/- 250 (e1) resistor M = 20 TaN on alumina Revision: 03-Feb-17 Document Number: 61037 2 For technical questions, contact: efi vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 IMPEDANCE ()