MKT1813347405G Vishay

MKT1813 www.vishay.com Vishay Roederstein DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS Blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. QUICK REFERENCE DATA Capacitance range (E12 series) 470 pF to 22 F Capacitance tolerance 20 %, 10 %, 5 % Climatic testing class according to IEC 60068-1 55/100/56 Maximum application temperature 100 C Reference specifications IEC 60384-2 Dielectric Polyester film Electrodes Metallized Construction Mono and internal series construction Encapsulation Plastic-wrapped, epoxy resin sealed, flame retardant Leads Tinned wire C-value tolerance rated voltage manufacturers type code for dielectric material Marking manufacturer location manufacturer s logo year and week Rated DC voltage 63 V , 100 V , 250 V , 400 V , 630 V , 1000 V DC DC DC DC DC DC Rated AC voltage 40 V , 63 V , 160 V , 200 V , 220 V AC AC AC AC AC Pull test on leads Minimum 20 N in direction of leads according to IEC 60068-2-21 Bent test on leads 2 bends through 90 combined with 10 N tensile strength Operational life > 300 000 h (40 C/0.5 U ) R Reliability Failure rate < 2 FIT (40 C/0.5 U ) R Note For more detailed data and test requirements, contact dc-film vishay.com DIMENSIONS in millimeters d D L 40.0 5.0 40.0 5.0 Max. Max. LEAD DIAMETER D d 0.6 5.0 0.7 > 5.0 7.0 0.8 > 7.0 < 16.5 1.0 16.5 Revision: 04-Jul-13 Document Number: 26013 1 For technical questions, contact: dc-film vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MKT1813 www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE MULTIPLIER (numerically) (nF) 0.1 2 Example: 13 468 = 680 nF 10 4 100 5 MKT 1813 X XX 25 X X SPECIAL LETTER FOR TAPED Bulk RReel TYPE G Ammopack TOLERANCE Un = 06 = 63 V 4 5 % Un = 01 = 100 V 5 10 % Un = 25 = 250 V 6 20 % Un = 40 = 400 V Un = 63 = 630 V Un = 10 = 1000 V Note For detailed tape specifications refer to Packaging Information www.vishay.com/doc 28139 or end of catalog SPECIFIC REFERENCE DATA DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz -4 -4 -4 C = 0.1 F 80 x 10 150 x 10 250 x 10 -4 -4 0.1 F C = 1.0 F 80 x 10 150 x 10 - -4 C 1.0 F 100 x 10 -- CAPACITOR MAXIMUM PULSE RISE TIME (dU/dt) V/s R LENGTH 63 V 100 V 250 V 400 V 630 V 1000 V DC DC DC DC DC DC (mm) 11 12 18 32 56 84 - 14 11 13 22 37 66 175 19 7 8 13 21 33 65 26.5 4 5 8 13 19 34 31.5 3 4 6 10 15 25 41.5 2 3 5 7 10 17 If the maximum pulse voltage is less than the rated voltage higher dU/dt values can be permitted. R between leads, for C 0.33 F and U 100 V > 15 000 M R R between leads, for C 0.33 F and U > 100 V > 30 000 M R RC between leads, for C > 0.33 F and U 100 V > 5000 s R RC between leads, for C > 0.33 F and U > 100 V > 10 000 s R R between leads and case, 100 V (foil method) > 30 000 M Withstanding (DC) voltage (cut off current 10 mA) rise time 100 V/s 1.6 x U , 1 min RDC Maximum application temperature 100 C Revision: 04-Jul-13 Document Number: 26013 2 For technical questions, contact: dc-film vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000