MSP www.vishay.com Vishay Dale Thick Film Resistor Networks, Single-In-Line, Molded SIP FEATURES Isolated, bussed, and dual terminator schematics available Available 0.195 (4.95 mm) A or 0.350 (8.89 mm) C maximum seated height Thick film resisitive elements Low temperature coefficient (-55 C to +125 C) 100 ppm/C Rugged, molded case construction Available Reduces total assembly costs Compatible with automatic insertion equipment and reduces PC board space Wide resistance range (10 to 2.2 M ) Available in tube pack Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING TEMPERATURE TCR MAXIMUM GLOBAL RESISTANCE (2) (1) ELEMENT TOLERANCE COEFFICIENT TRACKING WORKING MODEL/ PROFILE RANGE (3) P % (-55 C to +125 C) (-55 C to +125 C) VOLTAGE 70 C SCHEMATIC W ppm/C ppm/C V DC MSPxxx01 A 0.20 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx01 C 0.25 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx03 A 0.30 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx03 C 0.40 10 to 2.2M 1, 2, 5 100 50 100 MSPxxx05 A 0.20 10 to 2.2M 1, 2, 5 100 150 100 MSPxxx05 C 0.25 10 to 2.2M 1, 2, 5 100 150 100 Notes (1) Tighter tracking available (2) 2 % standard, 1 % and 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format) M S P 0 6 A 0 3 1 K 0 0 G D A GLOBAL PIN PACKAGE RESISTANCE TOLERANCE SCHEMATIC PACKAGING SPECIAL MODEL COUNT HEIGHT VALUE CODE MSP 06 = 6 pin A = A profile 01 = Bussed R = F = 1 % EJ = Lead (Pb)-free, Blank = Standard 08 = 8 pin C = C profile 03 = Isolated K = k G = 2 % tube (Dash Number) 09 = 9 pin 00 = Special M = M J = 5 % (Up to 3 digits) DA = Tin/lead, tube 10 = 10 pin 10R0 = 10 S = Special From 1 to 999 33K0 = 33 k Z = 0 as applicable 1M00 = 1 M Jumper 0000 = 0 Jumper Historical Part Number Example: MSP06A03102G (will continue to be accepted) MSP 06 A 03 102 G D03 HISTORICAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format) M S P 0 8 C 0 5 1 3 1 A G D A GLOBAL PIN PACKAGE RESISTANCE TOLERANCE SCHEMATIC PACKAGING SPECIAL MODEL COUNT HEIGHT VALUE CODE MSP 06 = 6 pin A = A profile 05 = Dual 3 digit impedance F = 1 % EJ = Lead (Pb)-free, Blank = Standard 08 = 8 pin C = C profile terminator code, followed by G = 2 % tube (Dash Number) 09 = 9 pin alpha modifier J = 5 % (Up to 3 digits) DA = Tin/lead, tube 10 = 10 pin (see Impedance From 1 to 999 Codes table) as applicable Historical Part Number Example: MSP08C05221331G (will continue to be accepted) MSP 08 C 05 221 331 G D03 HISTORICAL PIN PACKAGE RESISTANCE RESISTANCE TOLERANCE SCHEMATIC PACKAGING MODEL COUNT HEIGHT VALUE 1 VALUE 2 CODE Note For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc 31542). Revision: 13-Feb-15 Document Number: 31510 1 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 MSP www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) A 0.090 (2.29) Max. Max. Pin 1 0.015 D Max. (0.381) Min. 0.040 0.010 0.135 + 0.015 (1.02 0.254) - 0.010 0.016 0.003 (3.43 + 0.381 (0.406 0.076) 0.100 0.010 - 0.254) 0.012 0.003 (2.54 0.254) B (0.305 0.076) Non-Accumulative C Equal Space GLOBAL MODEL A (Max.) B C D (Max.) MSP06 0.590 (14.99) 0.500 (12.70) 5 MSPxxA = 0.195 (4.95) MSP08 0.790 (20.07) 0.700 (17.78) 7 MSPxxC = 0.350 (8.89) MSP10 0.990 (25.15) 0.900 (22.86) 9 MSP09 0.890 (22.61) 0.800 (20.32) 8 0.195 (4.95) only TECHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating See Derating Curves Maximum at +25 C and +70 C Voltage Coefficient of Resistance V < 50 ppm typical eff Dielectric Strength V 200 AC Isolation Resistance (03 Schematic) > 100 M Operating Temperature Range C -55 to +125 Storage Temperature Range C -55 to +150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, Method 215 Solderability Per MIL-STD-202, Method 208E, RMA flux Body Molded epoxy Terminals Copper alloy, solder plated MSP06A = 0.4 g MSP06C = 0.7 g MSP08A = 0.5 g MSP08C = 0.9 g Weight MSP09A = 0.55 g MSP10C = 1.1 g MSP10A = 0.6 g IMPEDANCE CODES CODE R ( ) R ()CODE R ( ) R () 1 2 1 2 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc 31530). Revision: 13-Feb-15 Document Number: 31510 2 For technical questions, contact: ff2aresistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000