NTCALUG01A103F161 Vishay

333 3 NTCALUG01A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Standard Lug Sensors FEATURES Easy mounting using ring tongue terminal Rugged construction Available Cable of PTFE insulation according to (1) NEMA HP-3, type E, rated 600 V , cable RMS test voltage 3.4 kV AEC-Q200 qualified (grade 1) cULus recognized, file E148885 (UL category XGPU2/XGPU8) LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools Models Related Note Documents (1) Formerly MIL-W-16878/4, type E NTC curve computation: www.vishay.com/thermistors/ntc-curve-list/ APPLICATIONS Suitable for surface sensing applications, especially when a QUICK REFERENCE DATA good electrical insulation and a good thermal contact with PARAMETER VALUE UNIT the chassis is required. (1) Resistance value at 25 C 4.7K to 100K (1) Tolerance on R -value 1 to 5 % 25 DESCRIPTION (1) B -value 3435 to 4190 K 25/85 A NTC thermistor chip is soldered to AWG 24 stranded Tolerance on B -value 0.5 to 1.5 % 25/85 copper leads with PTFE insulation and insulated with epoxy coating. The insulated sensor is attached to a tin plated Operating temperature range at: C copper ring lug. The lead wires are twisted and tinned. Zero dissipation -40 to +150 (2) Dissipation factor 23 mW/K PACKAGING (2) Thermal time constant 7.5 s The thermistors are packed in cardboard boxes the Min. dielectric withstanding 1500 V AC voltage between terminals and lug smallest packaging quantity is 500 units. Min. insulation resistance between 100 M terminals and lug at 500 V DC MOUNTING Climatic category 40 / 150 / 56 Important mounting and handling instructions: see (LCT / UCT / days) www.vishay.com/doc 29221 Weight 1.5 to 2.3 g By means of M3 (stud 3, 4) or M3,5 (stud 5, 6) screw. Notes Leads to be soldered or crimped (1) Other R -values, B -values, and tolerances are available 25 25/85 The device is suitable for screwing e.g. on metal surface upon request (2) Measured with screw mounted on an aluminum heatsink of The leads are suitable for soldering e.g. on PCB 2 100 cm , thickness 1.5 mm, in still air at T = +25 C amb Consult Vishay for other cable length, cable section , screw sizes, insulation, connector crimping, or other AGENCY APPROVALS features cUL certificate XGPU8.E148885 ULus certificate XGPU2.E148885 Note Agency approval documents, please see: www.vishay.com/ppg 29092&documents Revision: 23-Oct-2020 Document Number: 29092 1 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D NTCALUG01A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 3 4 D 1 L 2 E L L 1 3 L L D D D TL ED 1 2 1 2 3 3 4 Refer to the 3.8 1 3.7 + 0.2 / - 0 7.2 0.2 5.6 + 0.3 / - 0.2 1.0 15.70 0.3 6.2 0.2 1.12 0.1 ordering table ELECTRICAL DATA AND ORDERING INFORMATION UL SAP MATERIAL AND ORDERING NUMBER R - B - 25/85 25 B L RECOG. R 25/85 1 25 TOL. TOL. DESCRIPTION RoHS-COMPLIANT ( ) (K) (mm) RoHS-COMPLIANT ( %) (1) ( %) WITH EXEMPTION 38.1 NTC Lug01 4.7K 3 % 3984K 4700 3 3984 0.5 NTCALUG01A472H NTCALUG01A472HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103FL NTCALUG01A103FLA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F NTCALUG01A103FA 3.8 PTFE AWG 24 38 mm 80 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F800 NTCALUG01A103F800A 5 PTFE AWG 24 80 mm 80 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103F800L NTCALUG01A103F804A 5 PTFE AWG 24 80 mm 160 NTC Lug01 10K 1 % 3984K 10 000 1 3984 0.5 NTCALUG01A103F161 NTCALUG01A103F161A + 10 / - 5 PTFE AWG 24 160 mm 160 NTC Lug01 10K 1 % 3435K 10 000 1 3435 1 NTCALUG01A103F161L NTCALUG01A103F165A + 10 / - 5 PTFE AWG 24 160 mm 38.1 NTC Lug01 10K 2 % 3984K 10 000 2 3984 0.5 NTCALUG01A103G NTCALUG01A103GA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 3 % 3984K 10 000 3 3984 0.5 NTCALUG01A103H NTCALUG01A103HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 10K 5 % 3984K (2) 10 000 5 3984 0.5 NTCALUG01A103J NTCALUG01A103JA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 47K 3 % 4090K 47 000 3 4090 1.5 NTCALUG01A473H NTCALUG01A473HA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 100K 1 % 4190K 100 000 1 4190 1.5 NTCALUG01A104F NTCALUG01A104FA 3.8 PTFE AWG 24 38 mm 38.1 NTC Lug01 100K 2 % 4190K 100 000 2 4190 1.5 NTCALUG01A104G NTCALUG01A104GA 3.8 PTFE AWG 24 38 mm Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound (2) NTCALUG01A103J identical to NTCALUGE2C90169 = 2381 645 90169 Revision: 23-Oct-2020 Document Number: 29092 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000