NTCALUG02A103F161 Vishay

333 3 NTCALUG02A Series www.vishay.com Vishay BCcomponents NTC Thermistors, Low Thermal Gradient Lug Sensors FEATURES Low thermal gradient due to the use of nicke l conductor and low profile closed ring tongue Available AEC-Q200 qualified (grade 1) cULus recognized, file E148885 (UL category XGPU2/XGPU8) Mounting: assembly screw mounting LINKS TO ADDITIONAL RESOURCES Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 3D Models Design Tools Models Related Documents APPLICATIONS Thermistors used for accurate surface temperature sensing QUICK REFERENCE DATA and control in: PARAMETER VALUE UNIT Computer equipment (1) Resistance value at 25 C 4.7K to 100K Power electronics, heat-sink temperature control (1) Tolerance on R -value 1 2 3 % 25 Consumer appliances (1) B value 3435 to 4190 K 25/85 Industrial equipment Tolerance on B -value 0.5 1.0 1.5 % 25/85 Automotive equipment Operating temperature range at -55 to +125 C zero power DESCRIPTION Thermal time constant 5s Vishay thermistor chip NTC with epoxy coating and middle Dissipation factor 10 mW/K buffer layer mounted in a tin plated copper ring lug with (2) Thermal gradient < 0.05 K/K PEEK insulated leads AWG 30 ( 0.25 mm), Min. dielectric withstanding 1500 V AC mono-stranded silver-plated nickel. voltage between terminals and lug Min. insulation resistance between 100 M PACKAGING terminals and lug at 500 V DC The thermistors are packed in cardboard boxes the Climatic category 55 / 125 / 56 (LCT / UCT / days) smallest packaging quantity is 500 units. Weight 1.0 g CAUTIONS AND WARNINGS ON MOUNTING Notes (1) AND HANDLING Other R -values, B -values, and tolerances are available 25 25/85 upon request Please read the special instructions: (2) The thermal gradient is the difference per C between the true see www.vishay.com/doc 29221. temperature of the surface to be sensed and the temperatur e The device is suitable for screwing e.g. on a metal surface measured by the sensor through means of an M3 or M3.5 screw AGENCY APPROVALS The connections are suitable for soldering on a PCB or for cUL certificate XGPU8.E148885 connector insertion ULus certificate XGPU2.E148885 The sensor is not suitable for being in permanent contac t with water or liquids Note Other applicable screw hole sizes are available, for Agency approval documents, please see: www.vishay.com/ppg 29094&documents example M4 or American Stud 8 AWG 28 or AWG 26 wires available on request DESIGN-IN SUPPORT Other resistance curves and tolerances are available on request Consult Vishay for other lead length, other connector crimping, or other features NTCALUG02A Series www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters T D 2 D D 3 4 D 1 L 2 E L L 1 3 L L L D D D D ET 1 2 3 1 2 3 4 Refer to the ordering 6 1 16.8 0.3 3.7 + 0.2 / - 0 8.5 0.2 4.1 + 0.4 / - 0.1 0.56 0.1 4.8 0.2 0.8 table ELECTRICAL DATA AND ORDERING INFORMATION SAP MATERIAL AND ORDERING NUMBER UL RECOG. R R -TOL. B B -TOL. L 25 25 25/85 25/85 1 RoHS-COMPLIANT () ( %) (K) ( %) (mm) RoHS-COMPLIANT (1) WITH EXEMPTION NTCALUG02A472GA 4700 2 3984 0.5 45 3 NTCALUG02A472G 4700 1 3984 0.5 45 3 NTCALUG02A472F NTCALUG02A472FA NTCALUG02A502GA 5000 2 3984 0.5 45 3 NTCALUG02A502G (2) 10 000 2 3984 0.5 45 3 NTCALUG02A103G NTCALUG02A103GA NTCALUG02A103FA 10 000 1 3984 0.5 45 3 NTCALUG02A103F 10 000 1 3984 0.5 80 +5 / -3 NTCALUG02A103F800 NTCALUG02A103F800A NTCALUG02A103F161A 10 000 1 3984 0.5 160 +5 / -3 NTCALUG02A103F161 10 000 1 3435 1.0 45 3 NTCALUG02A103FL NTCALUG02A103FLA NTCALUG02A103F804A 10 000 1 3435 1.0 80 +5 / -3 NTCALUG02A103F800L 10 000 1 3435 1.0 160 +5 / -3 NTCALUG02A103F161L NTCALUG02A103F165A NTCALUG02A104HA 100 000 3 4190 1.5 45 3 NTCALUG02A104H Notes Preferred versions for new designs (1) RoHS exemption 7(c)-I: electrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezo-electronic devices, or in a glass or ceramic matrix compound (2) Is also known under material number NTCALUGE4C90294 Revision: 21-Feb-2022 Document Number: 29094 2 For technical questions, contact: nlr vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000