P2010Z3904LBTA Vishay

333 3 P www.vishay.com Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors, Sulfur Resistant FEATURES Load life stability 0.02 % typical at 8000 h at 70 C under Pd (0.033 % maximum) Low temperature coefficient down to 5 ppm/C Available (-55 C +155 Cfie) Very low noise < -35 dB and voltage coefficient Available < 0.01 ppm/V Wide resistance range: 10 to 86 M Available depending on size Tolerances to 0.01 % In lot tracking 5 ppm/C Available Termination: thin film technology Short circuits (jumpers) r < 50 mR, I < 2 A, see PZR LINKS TO ADDITIONAL RESOURCES datasheet (www.vishay.com/doc 53053) Withstand moisture resistance test of AEC-Q200 3D Models Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance For low noise and precision applications, superior stability, please see www.vishay.com/doc 99912 low temperature coefficient of resistance, and low voltage Note coefficient, Vishay Sfernices proven precision thin film * This datasheet provides information about parts that are wraparound resistors exceed requirements of RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. MIL-PRF-55342G characteristics Y 10 ppm/C (-55 C Please see the information / tables in this datasheet for details +155 C) down to 5 ppm/C (-55 C +155 C). STANDARD ELECTRICAL SPECIFICATIONS RATED RATED LIMITING RESISTANCE TEMPERATURE POWER POWER ELEMENT TOLERANCE (2) MODEL SIZE RANGE COEFFICIENT W W VOLTAGE % () ppm/C (1) (1) Pn Pd V P0302 0302 10 to 420K 0.040 0.030 25 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0402 0402 10 to 1M 0.063 0.040 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0505 0505 10 to 4M 0.125 0.050 50 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P0603 0603 10 to 3.2M 0.125 0.100 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 (3) P0805 0805 10 to 8M 0.200 0.125 150 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1005 1005 10 to 7.5M 0.250 0.125 75 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1206 1206 10 to 22M 0.330 0.250 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 P1505 1505 10 to 13.8M 0.350 0.175 200 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 (4) P2010 2010 10 to 62M 1 0.500 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 (4) P2512 2512 10 to 86M 2 1 300 0.01, 0.02, 0.05, 0.1, 0.25, 0.5, 1, 2, 5 5, 10, 25, 50, 100 Notes (1) Pn = nominal power: Pd = derated power intended to improve stability (2) For ohmic range versus tolerance and TCR see detailed table on next page (3) Model P0805 having the same size than P0705 and the same performances, only codification of P0805 remains (4) With special assembly care CLIMATIC SPECIFICATIONS MECHANICAL SPECIFICATIONS Operating temperature Substrate Alumina -55 C +155 C range Technology Thin film Note Nickel chromium with mineral Film For temperature up to 230 C, see PHT datasheet passivation or CrSi (www.vishay.com/doc 53050) Protection Epoxy + silicone B type: SnPb over nickel barrier for PERFORMANCE VS. HUMID SULFUR VAPOR solder reflow 50 C 2 C, 85 % 4 % RH, Test conditions Terminations N type: SnAg over nickel barrier exposure time 500 h G type: gold over nickel barrierfor Resistance drift < (0.05 % R + 0.05 ), other applications Test results no corrosion products observed Revision: 18-Oct-2021 Document Number: 53017 1 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D P www.vishay.com Vishay Sfernice DIMENSIONS in millimeters (inches) A D D B C E E AB MAX. TOL. MAX. TOL. D/E +0.152 (+0.006) +0.127 (+0.005) CASE SIZE C MIN. TOL. MIN. TOL. -0.152 (-0.006) -0.127 (-0.005) NOMINAL NOMINAL NOMINAL TOLERANCE 0302 0.75 (0.029) 0.60 (0.024) 0.15 (0.006) 0.08 (0.003) 0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004) 0505 1.27 (0.005) 1.27 (0.050) 0603 1.52 (0.060) 0.85 (0.033) 0.38 (0.015) 0805 1.91 (0.075) 1.27 (0.050) 0.5 (0.02) 0.127 (0.005) 1005 2.54 (0.100) 1.27 (0.050) 0.13 (0.005) 1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016) 1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019) 2010 5.08 (0.200) 2.54 (0.100) 2512 6.30 (0.248) 3.30 (0.130) 0.48 (0.019) Note Model P0805 having the same size than P0705 and the same performances, only codification of P0805 remains SUGGESTED LAND PATTERN (to IPC-7351A) G min. X max. Z max. DIMENSIONS in millimeters (inches) CHIP SIZE Z G X max. min. max. 0302 1.30 (0.051) 0.15 (0.006) 0.73 (0.029) 0402 1.55 (0.061) 0.15 (0.006) 0.73 (0.029) 0505 1.82 (0.072) 0.10 (0.004) 1.40 (0.055) 0603 2.37 (0.093) 0.35 (0.014) 0.98 (0.039) 0805 2.76 (0.109) 0.74 (0.029) 1.40 (0.055) 1005 3.39 (0.133) 1.37 (0.054) 1.40 (0.055) 1206 3.91 (0.154) 1.85 (0.073) 1.73 (0.068) 1505 4.66 (0.183) 2.44 (0.096) 1.45 (0.057) 2010 5.93 (0.233) 3.71 (0.146) 2.67 (0.105) 2512 7.15 (0.281) 4.93 (0.194) 3.43 (0.135) Revision: 18-Oct-2021 Document Number: 53017 2 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000