P4SMA Series www.vishay.com Vishay General Semiconductor Surface Mount TRANSZORB Transient Voltage Suppressors FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a Available 10/1000 s waveform, repetitive rate (duty cycle): 0.01 % (300 W above 91 V) Excellent clamping capability Very fast response time SMA (DO-214AC) Low incremental surge resistance Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C AEC-Q101 qualified available - Automotive ordering code: P/NHE3 or P/NHM3 Material categorization: for definitions of compliance PRIMARY CHARACTERISTICS please see www.vishay.com/doc 99912 V (uni-directional) 5.8 V to 459 V WM TYPICAL APPLICATIONS V (bi-directional) 5.8 V to 185 V WM Use in sensitive electronics protection against voltage V (uni-directional) 6.8 V to 540 V BR transients induced by inductive load switching and lighting V (bi-directional) 6.8 V to 220 V BR on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. P 400 W, 300 W PPM P 3.3 W D MECHANICAL DATA I (uni-directional only) 40 A FSM Case: SMA (DO-214AC) T max. 150 C J Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Polarity Uni-directional, bi-directional Base P/N-M3 - halogen-free, RoHS-compliant, commercial Package SMA (DO-214AC) grade Base P/NHE3 X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3 X - halogen-free, RoHS-compliant, and AEC-Q101 qualified ( X denotes revision code e.g. A, B, ..... and only available DEVICES FOR BI-DIRECTION APPLICATIONS for 250 V to 540 V type) Terminals: matte tin plated leads, solderable per For bi-directional devices use CA suffix (e.g. P4SMA10CA). J-STD-002 and JESD 22-B102 Electrical characteristics apply in both directions. E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for uni-directional types the band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT (1)(2) Peak power dissipation with a 10/1000 s waveform (fig. 1) P 400 W PPM (1) Peak pulse current with a 10/1000 s waveform (fig. 3) I See next table A PPM Power dissipation on infinite heatsink at T = 50 C P 3.3 W A D (2) Peak forward surge current 8.3 ms single half sine-wave uni-directional only I 40 A FSM Operating junction and storage temperature range T , T -65 to +150 C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 C per fig. 2. Rating is 300 W above 91 V A (2) Mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pads to each terminal Revision: 10-Oct-2018 Document Number: 88367 1 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P4SMA Series www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM DEVICE MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK MARKING CLAMPING TEMPERATURE (1) PART V AT I CURRENT VOLTAGE LEAKAGE PULSE BR T CODE VOLTAGE COEFFICIENT NUMBER (V) I V AT V CURRENT T WM WM AT I OF V PPM BR (4) (2) (mA) (V) I I D PPM V (V) (%/C) UNI BI MIN. MAX. C (A) (A) P4SMA6.8A 6V8A 6V8C 6.45 7.14 10 5.80 1000 38.1 10.5 0.057 P4SMA7.5A 7V5A 7V5C 7.13 7.88 10 6.40 500 35.4 11.3 0.061 P4SMA8.2A 8V2A 8V2C 7.79 8.61 10 7.02 200 33.1 12.1 0.065 P4SMA9.1A 9V1A 9V1C 8.65 9.55 1.0 7.78 50 29.9 13.4 0.068 P4SMA10A 10A 10C 9.5 10.5 1.0 8.55 10 27.6 14.5 0.073 P4SMA11A 11A 11C 10.5 11.6 1.0 9.40 5.0 25.6 15.6 0.075 P4SMA12A 12A 12C 11.4 12.6 1.0 10.2 1.0 24.0 16.7 0.078 P4SMA13A 13A 13C 12.4 13.7 1.0 11.1 1.0 22.0 18.2 0.081 P4SMA15A 15A 15C 14.3 15.8 1.0 12.8 1.0 18.9 21.2 0.084 P4SMA16A 16A 16C 15.2 16.8 1.0 13.6 1.0 17.8 22.5 0.086 P4SMA18A 18A 18C 17.1 18.9 1.0 15.3 1.0 15.9 25.2 0.089 P4SMA20A 20A 20C 19.0 21.0 1.0 17.1 1.0 14.4 27.7 0.090 P4SMA22A 22A 22C 20.9 23.1 1.0 18.8 1.0 13.1 30.6 0.092 P4SMA24A 24A 24C 22.8 25.2 1.0 20.5 1.0 12.0 33.2 0.090 P4SMA27A 27A 27C 25.7 28.4 1.0 23.1 1.0 10.7 37.5 0.096 P4SMA30A 30A 30C 28.5 31.5 1.0 25.6 1.0 9.7 41.4 0.097 P4SMA33A 33A 33C 31.4 34.7 1.0 28.2 1.0 8.8 45.7 0.098 P4SMA36A 36A 36C 34.2 37.8 1.0 30.8 1.0 8.0 49.9 0.099 P4SMA39A 39A 39C 37.1 41.0 1.0 33.3 1.0 7.4 53.9 0.100 P4SMA43A 43A 43C 40.9 45.2 1.0 36.8 1.0 6.7 59.3 0.101 P4SMA47A 47A 47C 44.7 49.4 1.0 40.2 1.0 6.2 64.8 0.101 P4SMA51A 51A 51C 48.5 53.6 1.0 43.6 1.0 5.7 70.1 0.102 P4SMA56A 56A 56C 53.2 58.8 1.0 47.8 1.0 5.2 77.0 0.103 P4SMA62A 62A 62C 58.9 65.1 1.0 53.0 1.0 4.7 85.0 0.104 P4SMA68A 68A 68C 64.6 71.4 1.0 58.1 1.0 4.3 92.0 0.104 P4SMA75A 75A 75C 71.3 78.8 1.0 64.1 1.0 3.9 104 0.105 P4SMA82A 82A 82C 77.9 86.1 1.0 70.1 1.0 3.5 113 0.105 P4SMA91A 91A 91C 86.5 95.5 1.0 77.8 1.0 3.2 125 0.106 P4SMA100A 100A 100C 95.0 105 1.0 85.5 1.0 2.2 137 0.106 P4SMA110A 110A 110C 105 116 1.0 94.0 1.0 2.0 152 0.107 P4SMA120A 120A 120C 114 126 1.0 102 1.0 1.8 165 0.107 P4SMA130A 130A 130C 124 137 1.0 111 1.0 1.7 179 0.107 P4SMA150A 150A 150C 143 158 1.0 128 1.0 1.4 207 0.106 P4SMA160A 160A 160C 152 168 1.0 136 1.0 1.4 219 0.108 P4SMA170A 170A 170C 162 179 1.0 145 1.0 1.3 234 0.108 P4SMA180A 180A 180C 171 189 1.0 154 1.0 1.2 246 0.108 P4SMA200A 200A 200C 190 210 1.0 171 1.0 1.1 274 0.108 P4SMA220A 220A 220C 209 231 1.0 185 1.0 0.91 328 0.108 P4SMA250A 250A - 237 263 1.0 214 1.0 0.87 344 0.110 P4SMA300A 300A - 285 315 1.0 256 1.0 0.73 414 0.110 P4SMA350A 350A - 333 368 1.0 300 1.0 0.62 482 0.110 P4SMA400A 400A - 380 420 1.0 342 1.0 0.55 548 0.110 P4SMA440A 440A - 418 462 1.0 376 1.0 0.50 602 0.110 P4SMA480A 480A - 456 504 1.0 408 1.0 0.46 658 0.110 P4SMA510A 510A - 485 535 1.0 434 1.0 0.43 698 0.110 P4SMA540A 540A - 513 567 1.0 459 1.0 0.41 740 0.110 Notes (1) Pulse test: t 50 ms p (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V of 10 V and less, the I limit is doubled R D (5) V = 3.5 V at I = 25 A (uni-directional only) F F Revision: 10-Oct-2018 Document Number: 88367 2 For technical questions within your region: DiodesAmericas vishay.com, DiodesAsia vishay.com, DiodesEurope vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000