P9A2R100FISX1102ML Vishay

P9 www.vishay.com Vishay Sfernice 9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical detent fully integrated in option Center tap option Custom designs available on request Test according to CECC 41000 or IEC 60393-1 QUICK REFERENCE DATA Multiple module Up to 7 modules Material categorization: for definitions of compliance Switch module n/a please see www.vishay.com/doc 99912 Detent module Yes Special A: linear, L: logarithmic, F: reverse logarithmic electrical laws and others see specification Sealing level IP 64 Lifespan 25K cycles DIMENSIONS in millimeters (inches) 0.5 mm ( 0.02 ) 3.6 2.5 9.5 (0.14) 2.5 (0.10) L: See Shaft table (0.37) M7 x 0.75 (0.10) 11.35 (0.45) 1 P9 (0.04) 6.4 (0.25) 3 3.5 (0.14) 0.9 7 5 2.5 2.5 2.5 0.45 (0.04) R (0.276) (0.20) (0.10) (0.10) (0.10) (0.02) Vertical Mounting Center Tap 3.45 2 3.8 (0.14) (0.08) (0.15) See Shaft table 7.5 (0.30) 4.7 5.6 (0.19) (0.22) 3.5 0.2 2.5 (0.14) (0.01) See Bushing table (0.10) 3 x 0.9 2.5 2.5 2.5 (0.04) (0.10) (0.10) (0.10) 2.5 2.5 (0.10) (0.10) Center Tap and Vertical Mounting 2.5 7.5 (0.10) (0.30) 7.9 (0.31) Revision: 30-Jul-2021 Document Number: 51047 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000P9 www.vishay.com Vishay Sfernice GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Resistive element Conductive plastic Electrical travel 270 10 Linear Taper 0.1 Non Linear Taper 0.05 Power rating chart 0 0 50 110 10 20 30 40 60 70 80 90 100 120 130 AMBIENT TEMPERATURE (C) a c (1) (3) Circuit diagram b cw (2) 90 % F S R Vs 50 % % Ve A W Taper 20 % L 10 % 50 % 15 Electrical travel 270 15 Mechanical travel 300 Linear taper 1 k to 1 M Resistance range Non-linear taper 2.2 k to 500 k Standard 20 % Tolerance On request 10 % Linear taper 0.1 W Non-linear taper 0.05 W Power rating at 70 C Multiple assemblies linear taper 0.05 W per module Multiple assemblies non-linear taper 0.025 W per module Temperature coefficient (typical) 500 ppm 10 V DC Limiting element voltage 50 V AC End resistance (typical) 3 Contact resistance variation Linear law (typical) 2 % of nominal resistance Independent linearity Linear law (typical) 5 % Insulation resistance 100 M at 250 V DC Dielectric strength 300 V during 1 min AC Attenuation (typical) 90 dB max./0.05 dB min. Revision: 30-Jul-2021 Document Number: 51047 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 RATED POWER (W)