PAC500002209FAC000 Vishay

PAC.. Series www.vishay.com Vishay Draloric Cemented Leaded Wirewound Precision Resistors FEATURES High power dissipation in small volume Ideal for pulse application TCR 100 ppm/K Maximum permissible hot spot temperature is 275 C Lead (Pb)-free Tolerance 1 % Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 The resistor element is a resistive wire which is wound in a The resistor is coated with a green silicon cement which is single layer on a ceramic rod. Metal caps are pressed over not resistant to aggressive fluxes. The coating is the ends of the rod. The ends of the resistance wire and the non-inflammable, will not drip even at high overloads and leads are connected to the caps by welding. Tinned is resistant to most commonly used cleaning solvents, in copper-clad iron leads with poor heat conductivity are accordance with IEC 60 068-2-45. employed permitting the use of relatively short leads to obtain stable mounting without overheating the solder joint. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING LIMITING (2) RESISTANCE RANGE TOLERANCE MODEL P VOLTAGE 25 C % W U max. PAC01 1 P x R 0.10 to 2.2K 1 (1) PAC02 2 0.10 to 3.6K 1 P x R PAC03 3 P x R 0.10 to 4.7K 1 PAC04 4 0.10 to 8.2K 1 P x R PAC05 5 P x R 0.10 to 12K 1 PAC06 6 0.10 to 12K 1 P x R Notes For Pulse Diagrams see AC.. Series (www.vishay.com/doc 28730) (1) PAC02 WSZ: P = 1.8 W 25 C (2) Resistance value to be selected for 1 % tolerance from E24 and E96 Revision: 14-Mar-17 Document Number: 28731 1 For technical questions, contact: ww1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 PAC.. Series www.vishay.com Vishay Draloric PART NUMBER AND PRODUCT DESCRIPTION Part Number: PAC300004701FAC000 P AC 3000 0 470 1 FA C 0 0 0 TOLERANCE PACKAGING MODEL VARIANT TCR/MATERIAL VALUE SPECIAL CODE CODE PAC100 = PAC01 0 = neutral 0 = standard 3 digit value F = 1.0 % (see The 3 digits are PAC200 = PAC02 1 = SWI = ( 100 ppm/K) 1 digit multiplier Packaging used for all special (1) PAC300 = PAC03 Special winding MULTIPLIER table) part styles. -3 PAC400 = PAC04 2 = RT 7 = *10 To encode the -2 PAC500 = PAC05 3 = DK SP 20 mm 8 = *10 non standard (2) -1 PAC600 = PAC06 4 = DK LP 33 mm 9 = *10 specifications all (2) 0 5 = DK LP 17.8 mm 0 = *10 special parts of one (2) 1 7 = DK LP 25.4 mm 1 = *10 series are listed in a 2 8 = DK SP 25.4 mm 2 = *10 cross reference 3 9 = WSZ 6720 3 = *10 table. (2) 4 C = E/K 25.4 mm 4 = *10 000 = standard 5 Z = value overflow 5 = *10 (special) Product Description: PAC03 4K7 1 % AC PAC03 4K7 1 % AC PACKAGING (3) (3) (3) MODEL VALUE TOLERANCE CODE (4) DESCRIPTION Notes (1) Special winding on request (2) Other dimensions on request (3) See Part Number and Product Description (4) See Packaging Table PACKAGING TABLE AMMO LOOSE BLISTER MODEL PACK PACK. PACK PACK. PACK PACK. PIECES PIECES PIECES CODE DESC. CODE DESC. CODE DESC. PAC01 1000 A1 A1 PAC01 DK/EK 500 LC LC PAC01RT 2500 AE AE PAC02 500 AC AC PAC02 DK/EK 500 LC LC PAC02 WSZ 1250 BM BM PAC03 500 AC AC PAC03 DK/EK 500 LC LC PAC04 500 AC AC PAC04 DK/EK 500 LC LC PAC05 500 AC AC PAC05 DK/EK 250 LB LB PAC06 500 AC AC PAC06 DK/EK 250 LB LB Revision: 14-Mar-17 Document Number: 28731 2 For technical questions, contact: ww1resistors vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000