PE60L0FLW100MA Vishay

PE60 www.vishay.com Vishay Sfernice Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 QUICK REFERENCE DATA Multiple module No Switch module n/a Detent module n/a A: linear, L: logarithmic, F: reverse Special electrical laws logarithmic Sealing level IP 67 Lifespan 25K cycles DIMENSIONS in millimeters (inches) 0.5 mm ( 0.02 ) PE 60 F PE 60 L FR = 50 (1.969) GR = 50.8 (2) 150 18 150 18 FL = 25 GJ = 22.22 (5.872) min. (0.709) (0.984) (5.872) min. (0.709) (7/8) FG = 16 GB = 12.7 Slot 1 x 1.8 deep 8 (0.630) (1/2) (0.039 x 0.071) 25 6 6.35 (0.236) (0.250) Slot 1 x 1.8 deep (0.039 x 0.071) Thread M 10 x 75 Thread 3/8 32-UNEF-2A 12 9.52 Wrench = 14 Wrench = 12.5 (0.472) (0.551) (3/8) (0.492) OPTION D: DBAN SHAFT LOCKING OPTION L: PE 60 LPRP - WITH LOCATING PEG Wrench = 14 (0.551) 3 (0.118) 0.8 (0.031) Wrench = 12 (0.472) 6 12.5 (0.236) 1.8 (0.492) (0.071) 9.2 (0.362) 2.3 (0.091) 3 (0.118) 6.5 (0.256) 15 Available on PE 60 L and PE 60 F (0.591) Available only with PE 60 L Panel sealed version PE 60 M OPTION E: Including locating peg (available 21 (0.825) 9 (0.356) 8 0.2 (0.315 Flat located 0.008) 1.2 0.7 (0.028) (0.047) 6 (0.236) 10.5 Sealing ring (0.413) FD = 13 (0.514) FJ = 22 (0.868) FP = 47 (1.852) Available only with bushing M10 x 0.75 and shafts 6 mm Revision: 04-Jul-17 Document Number: 51005 1 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000PE60 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 270 10 linear taper 1 to 1 M Resistance range logarithmic taper 100 to 2.2 M Standard series e3 1 - 2 - 2.5 - 5 standard 20 % Tolerance on request 10 % 100 80 F 60 A L Taper 40 20 0 0 10020 40 60 80 % CLOCKWISE SHAFT ROTATION Yellow Green (1) (3) Circuit diagram CW (2)Red LIN. TAPER A 6 linear 6 W at 50 C LOG. TAPER L and F Power rating 3 logarithmic 3 W at 50 C 0 20 40 60 70 80 0 100 125 140 AMBIENT TEMPERATURE IN C Temperature coefficient See Standard Resistance Element Data Limiting element voltage (linear taper) 350 V Contact resistance variation (linear taper) 3 % Rn or 1 % End resistance (typical) 0.5 or 1 % Dielectric strength (RMS) 2500 V 5 Insulation resistance (500 V)10 M DC MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical travel 300 5 Temperature range -55 C to +125 C Operating torque (typical) 3 Ncm max. Climatic category 55/125/56 End stop torque 70 Ncm max. Sealing Fully sealed - container IP67 Tightening torque of 250 Ncm mounting nut Unit weight 25 g to 35 g max. Revision: 04-Jul-17 Document Number: 51005 2 For technical questions, contact: sferpottrimmers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 % TO TA L RESIST ANCE POWER IN W