333 3 PRA073, PRA074, PRA100, PRA135, PRA182 (CNW) www.vishay.com Vishay Sfernice High-Precision Thin Film Chip Resistor Arrays, Sulfur Resistant FEATURES High-stability passivated nichrome resistive layer 0.02 % on ratio, 1000 h at Pn at +70 C Tight TCR (10 ppm/C) and TCR tracking (to 1 ppm/C) Very low noise < -35 dB and voltage coefficient < 0.01 ppm/V Available Ratio tolerance to 0.01 % (R 200R) High-temperature (230 C) version, see PRA HT Available ESA-qualified version, see PRA HR LINKS TO ADDITIONAL RESOURCES SMD wraparound chip resistor array Thin film technology 3D Models Option to withstand humidity test of AEC-Q200 Sulfur resistant (per ASTM B809-95 humid vapor test) PRA arrays can be used in most applications requiring a Material categorization: for definitions of compliance matched pair (or set) of resistor elements. The networks please see www.vishay.com/doc 99912 provide 1 ppm/C TCR tracking, a ratio tolerance as tight as 0.01 %, and outstanding stability. TYPICAL PERFORMANCE They are available in pitch: ABSOLUTE TRACKING 0.70 mm for PRA073 (based on case 0302) 0.70 mm for PRA074 (based on case 0402) TCR 10 ppm/C 2 ppm/C 1.00 mm for PRA100 (based on case 0603) ABSOLUTE RATIO 1.35 mm for PRA135 (based on case 0805) TOL. 0.1 % 0.01 % 1.82 mm for PRA182 (based on case 1206) DIMENSIONS Independent resistors One common point B B A A D D C C F E F E Suggested land pattern (according to IPC-7351A) Z G X max. min. max. E PRA073 PRA074 PRA100 PRA135 PRA182 (0302 base) (0402 base) (0603 base) (0805 base) (1206 base) DIM. mm mil mm mil mm mil mm mil mm mil A 0.75 0152 29.5 6 1.00 0.152 40 6 1.52 0.152 60 6 1.91 0.152 75 6 3.06 0.152 120 6 B = N x E ( 0.2 mm) B B = N x E ( 8 mil) C 0.5 0.127 20 5 0.5 0.127 20 5 0.5 0.127 20 5 0.5 0.127 20 5 0.5 0.127 20 5 D 0.15 0.08 5.9 3 0.25 0.1 10 4 0.38 0.13 15 5 0.38 0.13 15 5 0.4 0.13 16 5 E 0.7 27.5 0.7 27.5 1 40 1.35 53 1.825 72 F 0.55 0.1 21.5 4 0.55 0.1 21.5 4 0.7 0.1 27.6 4 1.05 0.1 41.4 4 1.525 0.1 6 4 G 0.28 11 0.29 11.4 0.49 19.3 0.88 34.5 1.99 78.3 min. X 0.51 20 0.51 20 0.66 26 1.01 39.8 1.49 58.7 max. Z 1.8 70.9 2.05 80.7 2.57 101.2 2.96 116.5 4.11 161.8 max. Note N represents number of resistors Revision: 04-Mar-2021 Document Number: 53033 1 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DPRA073, PRA074, PRA100, PRA135, PRA182 (CNW) www.vishay.com Vishay Sfernice (1) GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PRA100I4-5K62BWBT51 P RA 1 0 0 I 4 - 5 K6 2B W BT 99 GLOBAL NUMBERS OF (2) CONFIG. VALUE ABS. TOL. RATIO TOL. TERMINATION PACKAGING OPTION MODEL RESISTORS PRA073 I: independent 2 to 8 Decimal B = 0.1 % B = 0.1 % B: SnPb over For more Leave PRA074 C: common R or K D = 0.5 % W = 0.05 % nickel barrier information see blank PRA100 P = 0.02 % N: SnAg over Codification if no PRA135 L = 0.01 % nickel barrier of Packaging option PRA182 G: gold over table nickel barrier B: lead bearing version N and G: lead (Pb)-free / RoHS version For different ohmic values on a given network a specific part number is used CNW 1368 T GLOBAL For more information see REFERENCE MODEL Codification of Packaging table Historical Part Number Example: PRA100 I 4 5K62 0.1 % 0.05 % TR R0051 PRA100 I 4 5K62 0.1 % 0.05 % TR R0099 HISTORICAL NUMBERS OF CONFIG. OHMIC VALUE ABS. TOL. RATIO TOL. PACKAGING OPTION MODEL RESISTORS Notes (1) Part number can only have 18 digits. Depending on information needed a compromise has to be found. Consult Vishay (2) When the last digit(s) of the ohmic value is (are) 0, it (they) must be omitted E.g.:PRA100I4-2K20BWN must be ordered under PRA100I4-2K2BWN PRA100I4-2K00BWN must be ordered under PRA100I4-2KBWN STANDARD ELECTRICAL SPECIFICATIONS POWER RESISTANCE ABSOLUTE RATIO ABSOLUTE RATIO RATING PER (2) (3) (4) MODEL SIZE RANGE TOLERANCE TOLERANCE TCR TCR (1) RESISTOR % % ppm/C ppm/C W PRA073 073 10 to 50K 0.030 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2 PRA074 074 10 to 100K 0.040 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2 PRA100 100 10 to 250K 0.100 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2 PRA135 135 10 to 500K 0.125 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2 PRA182 182 10 to 2M 0.200 0.1, 0.5 0.01, 0.02, 0.05, 0.1 10 1, 2 Notes (1) At +70 C (2) 0.02 % (R 50 ), 0.01 % (R 200 ) (3) At -40 C to +125 C (4) At -40 C to +125 C, 1 ppm/C on request CLIMATIC SPECIFICATIONS PERFORMANCES (1) Operating temperature range -55 C to +155 C TEST SPECIFICATIONS Note Noise -35 dB (1) For temperature up to 230 C, see PRA HT Voltage coefficient 0.01 ppm/V (www.vishay.com/doc 53057) or consult factory PRA073 20 V PRA074 40 V PERFORMANCE VS. HUMID SULFUR VAPOR Limiting voltage PRA100 50 V 50 C 2 C, 85 % 4 % RH, Test conditions PRA135 100 V exposure time 500 h PRA182 150 V Resistance drift < (0.05 % R + 0.05 ), Test results no corrosion products observed Revision: 04-Mar-2021 Document Number: 53033 2 For technical questions, contact: sferthinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000