End of Life July-2017 SFH6700, SFH6701, SFH6702, SFH6705, SFH6711, SFH6712, SFH6719 www.vishay.com Vishay Semiconductors High Speed Optocoupler, 5 MBd, 1 kV/s dV/dt FEATURES SFH6700, SFH6719 SFH6701, SFH6711 1 8 1 8 NC V NC V CC CC Data rate 5 MBits/s (2.5 MBit/s over A 2 7 V A 2 7 V temperature) O O C 3 6 V C 3 6 Buffer E NC Isolation test voltage, 5300 V for 1 min NC 4 5 NC 4 5 GND GND RMS TTL, LSTTL and CMOS compatible SFH6702, SFH6712 SFH6705 1 1 8 Internal shield for very high common mode NC 8 V NC V CC CC transient immunity A 2 7 A 2 7 NC NC Wide supply voltage range (4.5 V to 15 V) C 3 6 V C 3 6 V O O Low input current (1.6 mA to 5 mA) NC 4 5 NC 4 5 GND GND Three state output (SFH6700, SFH6719) i179073 2 V DE i179073 7 Totem pole output (SFH6701, SFH6702, SFH6711, SFH6712) DESCRIPTION Open collector output (SFH6705) Material categorization: for definitions of compliance The SFH67xx high speed optocoupler series consists of a please see www.vishay.com/doc 99912 GaAlAs infrared emitting diode, optically coupled with an integrated photo detector. The detector incorporates a APPLICATIONS Schmitt-Trigger stage for improved noise immunity. Using Industrial control the enable input, the output can switched to the high ohmic state, which is necessary for data bus applications. Replace pulse transformers A Faraday shield provides a common mode transient Routine logic interfacing immunity of 1000 V/ at V = 50 V for SFH6700, SFH6701, CM Motion/power control SFH6702, SFH6705 and 2500 V/ at V = 400 V for CM High speed line receiver SFH6711, SFH6712, SFH6719. Microprocessor system interfaces The SFH67xx uses an industry standard DIP-8 package. Computer peripheral interfaces With standard lead bending, creepage distance and clearance of 7 mm with lead bending options 6, 7, and AGENCY APPROVALS 9 8 mm are achieved. UL1577 DIN EN 60747-5-5 (VDE 0884) available with option 1 (pending) cUL CQC ORDERING INFORMATION DIP-8 Option 6 S F H 67 - X 00 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE Option 7 Option 9 AND REEL > 0.1 mm > 0.7 mm AGENCY CERTIFIED/PACKAGE THREE STATE TOTEM POLE OPEN COLLECTOR UL SFH6700 SFH6701 SFH6711 SFH6705 DIP-8 SFH6719 SFH6702 SFH6712 - DIP-8, 400 mil, option 6 - SFH6702-X006 - SFH6705-X006 - SFH6701-X007 SFH6711-X007 SFH6705-X007 SMD-8, option 7 - SFH6702-X007 SFH6712-X007 - (1) (1) SMD-8, option 9 SFH6700-X009 SFH6702-X009T SFH6701-X009T - Note Also available in tubes. To order, do not add T on end Rev. 1.7, 07-Feb-17 Document Number: 83683 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life July-2017 SFH6700, SFH6701, SFH6702, SFH6705, SFH6711, SFH6712, SFH6719 www.vishay.com Vishay Semiconductors TRUTH TABLE (positive logic) PARTS IR DIODE ENABLE OUTPUT on H Z SFH6700 off H Z on L H SFH6719 off L L on H SFH6701 off L on H SFH6702 off L on H SFH6705 off L on H SFH6711 off L on H SFH6712 off L ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V 3V R DC forward current I 10 mA F Surge forward current t 1 s I 1A FSM Power dissipation P 20 mW diss OUTPUT Supply voltage V - 0.5 to + 15 V CC Three state enable voltage V - 0.5 to + 15 V EN (SFH6700, SFH6719 only) Output voltage V - 0.5 to + 15 V O Average output current I 25 mA O Power dissipation P 100 mW diss COUPLER Storage temperature range T - 55 to + 150 C stg Ambient temperature range T + 85 C amb Lead soldering temperature t = 10 s T 260 C sld Isolation test voltage t = 1 min V 5300 V ISO RMS Pollution degree 2 Standard lead bending 7 mm Creepage distance and clearance Options 6, 7, 9 8 mm Comparative tracking index per DIN 175 IEC 112/VDE 0303, part 1 12 V = 500 V, T = 25 C R 10 IO amb IO Isolation resistance 11 V = 500 V, T = 100 C R 10 IO amb IO Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability Rev. 1.7, 07-Feb-17 Document Number: 83683 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000