SFH6741, SFH6742, SFH6750, SFH6752 Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd FEATURES Single Channel Choice of CMR performance of 10 kV/s, NC 1 8 V 5 kV/s, and 100 V/s CC High speed: 10 MBd typical 2 7 A V E + 5 V CMOS compatibility 3 6 V C O Pure tin leads 4 5 NC GND Guaranteed AC and DC performance over SFH6741, SFH6742 temperature: - 40 C to + 100 C temperature range Dual Channel Meets IEC 60068-2-42 (SO ) and IEC 60068-2-43 (H S) 1 8 A1 V 2 2 CC requirements 2 7 C1 V O1 Low input current capability: 5 mA 3 6 C2 V O2 Compliant to RoHS Directive to 2002/95/EC and in 4 5 accordance WEEE 2002/96/EC A2 GND SFH6750, SFH6752 APPLICATIONS 18921-15 Microprocessor system interface PLC, ATE input/output isolation Computer peripheral interface DESCRIPTION Digital fieldbus isolation: CC-link, DeviceNet, profibus, The SFH674x and SFH675x are single channel 10 MBd SDS optocouplers utilizing a high efficient input LED coupled with High speed A/D and D/A conversion an integrated optical photodiode IC detector. The detector AC plasma display panel level shifting has an open drain NMOS-transistor output, providing less Multiplexed data transmission leakage compared to an open collector Schottky clamped Digital control power supply transistor output. For the single channel type, an enable Ground loop elimination function on pin 7 allows the detector to be strobed. The internal shield provides a guaranteed common mode AGENCY APPROVALS transient immunity of 5 kV/s for the SFH6741 and 10 kV/s UL1577, file no. E52744 system code H, double protection for the SFH6742 and SFH6752. cUL - file no. E52744, equivalent to CSA bulletin 5A DIN EN 60747-5-2 (VDE 0884)/ VDE available with option 1 Reinforced insulation rating per IEC60950 2.10.5.1 ORDERING INFORMATION DIP-8 Option 6 S F H 67 - X 00 T PART NUMBER PACKAGE OPTION TAPE 10.16 mm 7.62 mm AND REEL Option 7 > 0.7 mm SINGLE CHANNEL DUAL CHANNEL AGENCY CERTIFIED/PACKAGE CMR (kV/s) CMR (kV/s) BSI, UL, cUL 5 10 0.1 10 DIP-8 ---- DIP-8, 400 mil, option 6 - SFH6742-X006 SFH6750-X006 - SMD-8, option 7 SFH6741-X007T - - SFH6752-X007T Note For additional information on the available options refer to Option Information. Document Number: 82584 For technical questions, contact: optocoupleranswers vishay.com www.vishay.com Rev. 2.1, 29-Apr-11 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH6741, SFH6742, SFH6750, SFH6752 High Speed Optocoupler, Single and Dual, Vishay Semiconductors 10 MBd TRUTH TABLE (positive logic) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Average forward current (single channel) I 20 mA F Average forward current (per channel for I 15 mA F dual channel) Reverse input voltage V 5V R Enable input voltage (single channel) V V + 0.5 V V E CC Enable input current (single channel) I 5mA E Surge current t = 100 s I 200 mA FSM OUTPUT Supply voltage V 7V CC Output current I 50 mA O Output voltage V 7V O Output power dissipation (single channel) P 85 mW diss Output power dissipation per channel P 60 mW diss (dual channel) COUPLER Storage temperature T - 55 to + 150 C stg Operating temperature T - 40 to + 100 C amb Lead solder temperature (single channel) for 10 s 260 C (1) Solder reflow temperature for 1 min 260 C Isolation test voltage t = 1 s V 5300 V ISO RMS Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). RECOMMENDED OPERATING CONDITIONS PARAMETER TEST CONDITION SYMBOL MIN. MAX. UNIT Operating temperature T - 40 100 C amb Supply voltage V 4.5 5.5 V CC Input current low level I 0 250 A FL Input current high level I 515 mA FH Logic high enable voltage V 2V V EH CC Logic low enable voltage V 00.8 V EL Output pull up resistor R 330 4K L Fanout R = 1 k N5- L www.vishay.com For technical questions, contact: optocoupleranswers vishay.com Document Number: 82584 2 Rev. 2.1, 29-Apr-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000