SFH6747, SFH6755, SFH6756, SFH6757 www.vishay.com Vishay Semiconductors High Speed Optocoupler, 10 MBd, SOIC-8 Package Single channel FEATURES 1 8 V NC Choice of CMR performance of 10 kV/s, CC 2 7 5 kV/s, and 0.1 kV/s A V E 3 6 High speed: 10 MBd typical C V O 4 5 + 5 V CMOS compatibility NC GND Pure tin leads SFH6747 Guaranteed AC and DC performance over Dual channel temperature: -40 C to +100 C temperature range 1 8 A1 V CC Meets IEC 60068-2-42 (SO ) and IEC 60068-2-43 (H S) 2 2 2 7 C1 V O1 requirements 18921-17 3 6 C2 V O2 Low input current capability: 5 mA 4 5 A2 GND Material categorization: for definitions of compliance SFH6755, SFH6756, SFH6757 please see www.vishay.com/doc 99912 V DE APPLICATIONS Microprocessor system M interface DESCRIPTION PLC, ATE input / output isolation The SFH6747, SFH6755, SFH6756, and SFH6757 family are Computer peripheral interface: SPI single and dual channel 10 MBd optocoupler utilizing a high efficient input LED coupled with an integrated optical Digital fieldbus isolation: CC-Link, DeviceNet, profibus, photodiode IC detector. The detector has an open drain SDS NMOS-transistor output, providing less leakage compared High speed A/D and D/A conversion to an open collector Schottky clamped transistor output. AC plasma display panel level shifting For the single channel type, an enable function on pin 7 Multiplexed data transmission allows the detector to be strobed. The use of a 0.1 F bypass capacitor connected between pin 5 and 8 is Digital control power supply recommended. Ground loop elimination AGENCY APPROVALS UL1577, file no. E52744 cUL-file no. E52744, equivalent to CSAkm bulletin 5A ORDERING INFORMATION SIOC-8 SF H 6 7 T PART NUMBER TAPE AND 6.1 mm REEL 1 CHANNEL 2 CHANNELS AGENCY CERTIFIED/PACKAGE CMR (kV/s) CMR (kV/s) UL, cUL 10 0.1 5 10 SOIC-8 SFH6747T SFH6755T SFH6756T SFH6757T Rev. 1.1, 26-Aug-13 Document Number: 82583 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 SFH6747, SFH6755, SFH6756, SFH6757 www.vishay.com Vishay Semiconductors TRUTH TABLE (positive logic) (1) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H Note (1) Only applicable for single channel devices ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Average forward current (single channel) I 20 mA F Average forward current (dual channel) I 15 mA F Reverse input voltage V 5V R Enable input voltage (single channel) V V + 0.5 V V E CC Enable input current (single channel) I 5mA E Surge current t = 100 s I 200 mA FSM Input power dissipation (single channel) P 35 mW diss Input power dissipation P 25 mW diss (per channel for dual channel) OUTPUT Supply voltage 1 min maximum V 7V CC Output current I 50 mA O Output voltage V 7V O Output power dissipation (single channel) P 85 mW diss Output power dissipation P 60 mW diss (per channel for dual channel) COUPLER Isolation test voltage t = 1 s V 4000 V ISO RMS Storage temperature T -55 to +150 C stg Operating temperature T -40 to +100 C amb Lead solder temperature for 10 s 260 C (1) Solder reflow temperature for 1 min 260 C Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. RECOMMENDED OPERATING CONDITION PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Operating temperature T -40 - 100 C amb Supply voltage V 4.5 - 5.5 V CC Input current low level I 0 - 250 A FL Input current high level I 5- 15 mA FH Output pull up resistor R 330 - 4000 L Logic high enable voltage V 2- V V EH CC Logic low enable voltage V 0.0 - 0.8 V EL Fanout R = 1 k N- - 5 - L Rev. 1.1, 26-Aug-13 Document Number: 82583 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000