New Product SiP2100 Vishay Siliconix 5 V, 1 A H-Bridge Motor Driver DESCRIPTION FEATURES The SIP2100 is an integrated, buffered H-bridge with TTL 1 A drive capability and CMOS compatible inputs with the capability of delivering Optimized for 5 V V bias DD up to 1 A continuous current at 5 V V supply. DD Extremely low idle current The SIP2100 has two independent logic inputs that can set Shoot-through protection scheme four different motor operation modes: normal rotation, Thermal shutdown reverse rotation, stop (idling) and braking. The internal Material categorization: For definitions of compliance shoot-through protection logic also prevents upper and lower please see www.vishay.com/doc 99912 outputs from being turned on simultaneously. The SiP2100 offers high efficiency with an extremely low APPLICATIONS operating current. The device also benefits from over temperature protection with a shut down hysteresis of 20 C. High performance servo The SIP2100 is available in SOIC8 package. Optical/tape disk drives Brush/stepper motor driver PACKAGE OUTLINE S 1 8 OUT A A GND 2 7 IN A SOIC (Top View) VDD 3 6 IN B S B 4 5 OUT B Fig. 1 - Package and Pinout FUNCTIONAL BLOCK DIAGRAM AND TRUTH TABLE Fig. 2 - Functional Block Diagram TRUTH TABLE IN IN OUT Out A B A B 1010 0101 0000 11 HiZ HiZ Document Number: 63949 For technical questions, contact: powerictechsupport vishay.com www.vishay.com S12-2801-Rev. B, 10-Dec-12 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000New Product SiP2100 Vishay Siliconix ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise noted) A Electrical Parameter Conditions Limits Unit V Reference to GND - 0.3 to 6 DD OUT , OUT Reference to GND - 0.3 to 6 A B V S , S Reference to GND - 0.3 to 1 A B IN , IN Reference to GND - 0.3 to V A B DD Temperature Operating Temperature - 40 to 85 C Max. Operating Junction Temperature 150 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating/conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS Parameter Min.Typ.Max.Unit V 3.855.5 V DD Temperature Operating Junction Temperature 0 125 C Recommended Ambient Temperature 0 70 THERMAL RESISTANCE RATINGS Parameter Max. Unit SO-8, R 153 thJA Thermal Resistance (Junction to Ambient) C/W SO-8 PowerPAD, R 40 thJC SO-8, T = 70 C 522 mW A Power Dissipation SO-8 PowerPAD, T = 70 C 2 W A Junction Temperature - 65 to 150 C Storage Temperature - 55 to 150 www.vishay.com For technical questions, contact: powerictechsupport vishay.com Document Number: 63949 2 S12-2801-Rev. B, 10-Dec-12 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000