333 3 Upgrade for High Shock and Vibration Performance With T16 ST www.vishay.com Vishay SuperTan Wet Tantalum Capacitors With Hermetic Seal FEATURES Very high capacitance 10 F to 2200 F Available 25 V to 125 V DC DC Available Very low ESR High ripple current All tantalum case Hermetically sealed LINKS TO ADDITIONAL RESOURCES Low DCL Axial through-hole terminations: standard tin / lead (Sn / Pb), 3D Models 100 % tin (RoHS-compliant) available Material categorization: for definitions of compliance Vishay ST represents a major breakthrough in wet tantalum please see www.vishay.com/doc 99912 capacitor technology. Its unique cathode system provides Note the highest capacitance per unit volume. The design * This datasheet provides information about parts that are facilitates a doubling of capacitance, lower ESR and higher RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. ripple current rating compared with conventional wet Please see the information / tables in this datasheet for details tantalum products. Moreover, the ST has the capacitance stability of a solid tantalum capacitor and there are no circuit APPLICATION NOTES impedance restrictions. a. No continuous reverse voltage permissible. The ST is housed in an all tantalum, hermetically sealed case b. The peak of the applied AC ripple and the applied DC and is manufactured to withstand hazardous environments. voltage must not exceed the DC voltage rating of the The ST is used widely in the defense and aerospac e capacitor. industries and whenever there is a space problem. c. Ripple current ratings by part number at 85 C and 40 kHz are included in the table. Ripple current correction PERFORMANCE CHARACTERISTICS factors for other temperatures and frequencies are give n Operating Temperature: -55 C to +85 C on the next page. (to +125 C with voltage derating) d. Transient reverse voltage surges are acceptable unde r Capacitance Tolerance: at 120 Hz, +25 C. the following conditions: 20 % standard. 10 % available as special. the peak reverse voltage does not exceed 1.5 V and the peak current times the duration of the reverse transient does not exceed 0.05 As. In addition, the repetition frequency of the reverse voltage surge is less than 10 Hz. ORDERING INFORMATION (1) (2) ST 220 100 T4 M I E3 TYPE CAPACITANCE DC VOLTAGE CASE CAPACITANCE INSULATING TERMINATION AND PACKAGING F RATING AT +85 C CODE TOLERANCE SLEEVE M = 20 % I = insulated E3 = 100 % tin termination K = 10 % X = uninsulated (RoHS-compliant) Blank = SnPb termination (standard design) J = SMD, outside bend, tin / lead K = SMD, outside bend, 100 % tin L = SMD, inside bend, tin / lead M = SMD, inside bend, 100 % tin Notes Packaging: The use of formed plastic trays for packing bulk components is standard. Tape and reel cannot be used due to unit weight (1) Sleeve on J, K, L, M terminations shall be Kapton only (2) J, K, L, M are available in T4. For all other case sizes, check with marketing Revision: 12-May-2022 Document Number: 43000 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD DUpgrade for High Shock and Vibration Performance With T16 ST www.vishay.com Vishay AXIAL DIMENSIONS in inches millimeters Terminal welded 0.0253 0.002 0.64 0.05 dia. to case (no. 22 AWG) tinned nickel leads 0.250 6.35 solderable and weldable MAX. 0.094 2.38 MAX. Terminal location D DIA. E L E within 0.031 of center 1 MAX. INSULATED L + 0.031 / - 0.016 + 0.79 / - 0.41 1 CASE CODE D 0.016 0.41 E 0.250 6.3 MAX. (DIA.) UNINSULATED T1 0.188 4.78 0.219 5.56 0.453 11.51 1.500 38.10 T2 0.281 7.14 0.312 7.92 0.641 16.28 2.250 57.15 L2 0.281 7.14 0.312 7.92 1.008 25.60 2.250 57.15 T3 0.375 9.52 0.406 10.31 0.766 19.46 2.250 57.15 T4 0.375 9.52 0.406 10.31 1.062 26.97 2.250 57.15 Notes Material at egress is tantalum Approx. weight: Insulation sleeving will lap over the ends of the capacitor case T1: 2.3 g, T2: 5.7 g, T3: 9.4 g, T4: 14.8 g SMD PRODUCT DIMENSIONS in inches millimeters Styles J, K Styles L, M Solder type Solder type Term. code Term. code J 100 % tin (RoHS-compliant) L 100 % tin (RoHS-compliant) K SnPb M SnPb L L D L D L 1 1 H H 2 2 H H Tl x 2 T x 2 T x 2 Tl x 2 w w A B CASE CODE A B Tl H H L D 2 T 0.005 L w 1 (max.) (max.) (max.) (max.) (max.) (max.) (max.) TYPE ST ST 1.432 1.140 0.157 0.295 0.331 0.492 1.343 1.062 + 0.031 / - 0.016 0.397 DT4 36.4 29.0 4.0 7.5 8.4 12.5 34.1 26.97 + 0.79 / - 0.41 10.1 Revision: 12-May-2022 Document Number: 43000 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000