TF3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Built-In-Fuse FEATURES Low ESR 100 % surge current tested High ripple current carrying capability Terminations: 100 % matte tin standard Molded case available in three case codes Compliant terminations Compatible with high volume automatic pick and place equipment Meets EIA-535-BAAC mechanical and performance requirements PERFORMANCE / ELECTRICAL Moisture sensitivity level 1 CHARACTERISTICS Material categorization: for definitions of compliance www.vishay.com/doc 40192 please see www.vishay.com/doc 99912 Operating Temperature: -55 C to +125 C APPLICATIONS (above 85 C, voltage derating is required) Industrial Capacitance Range: 0.47 F to 470 F Medical Capacitance Tolerance: 10 %, 20 % Computing Voltage Rating: 4 V to 50 V DC DC Telecom infrastructure General purpose ORDERING INFORMATION TF3 E 477 M 004 E 0500 TYPE CASE CODE CAPACITANCE CAPACITANCE DC VOLTAGE TERMINATION / ESR TOLERANCE RATING AT +85 C PACKAGING See Ratings This is expressed K = 10 % This is expressed in V. Matte tin Maximum and Case in picofarads. M = 20 % To complete the 100 kHz C = 7 (178 mm) reel Codes table The first two three-digit block, zeros ESR in m D = 13 (330 mm) reel digits are the precede the voltage V = 7 (178 mm) reel, dry pack significant figures. rating. A decimal point U = 13 (330 mm) reel, dry pack The third is the is indicated by an R number of zeros (6R3 = 6.3 V) to follow Notes We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. Low ESR solid tantalum chip capacitors allow ESR of 1.25 times the datasheet limit after mounting. Dry pack as specified in J-STD-033 for MSL3. Applicable for D and E cases only. Revision: 13-Sep-16 Document Number: 40113 1 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TF3 www.vishay.com Vishay Sprague DIMENSIONS in inches millimeters L W T W H Glue pad T (MIN.) H Glue pad P CASE CODE EIA SIZE L W H P T T (MIN.) W H 0.236 0.012 0.126 0.012 0.098 0.012 0.051 0.012 0.087 0.004 0.039 C 6032-28 6.0 0.30 3.2 0.30 2.5 0.30 1.3 0.30 2.2 0.10 1.0 0.287 0.012 0.169 0.012 0.110 0.012 0.051 0.012 0.094 0.004 0.039 D 7343-31 7.3 0.30 4.3 0.30 2.8 0.30 1.3 0.30 2.4 0.10 1.0 0.287 0.012 0.169 0.012 0.157 0.012 0.051 0.012 0.094 0.004 0.039 E 7343-43 7.3 0.30 4.3 0.30 4.0 0.30 1.3 0.30 2.4 0.10 1.0 Note Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option). RATINGS AND CASE CODES F 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V C (8.00, 6.70, 0.47 1.90) C (7.00, 5.90, 0.68 1.70) C (5.50, 4.40, 1.0 2.70, 2.20) C (4.50, 3.80, C (5.00, 3.20, 1.5 2.60, 1.90) 2.00, 1.60) C (2.80, 1.40), 2.2 C (3.50, 2.80) C (3.50, 2.90) D (2.50, 2.10, 0.90) C (2.40, 1.60, C (2.50, 2.30, C (2.50, 2.00, 3.3 1.20), 2.10, 1.20) 0.90) D (2.00, 1.60) C (1.80, 0.90), D (1.10, 0.50), C (2.50, 1.90, 4.7 C (2.00, 1.00) D (1.50, 1.20, E (1.50, 1.10, 1.30, 1.00) 0.70, 0.60) 0.50) C (2.00, 1.90, C (2.00, 1.60, D (1.30, 1.00, D (0.90, 0.45), 6.8 C (2.00, 0.60) 0.60) 0.60) 0.75, 0.50) E (0.90, 0.45) D (0.80, 0.50, C (1.40, 0.60), C (2.00, 1.80, C (2.00, 1.80, C (2.00, 1.60, 0.40), 10 D (1.20, 1.00, 0.60) 0.70, 0.60) 0.80) E (1.00, 0.80, 0.60, 0.50) 0.50, 0.40) D (0.80, 0.50, C (1.40, 0.50), C (2.00, 1.80, C (2.00, 1.80, C (2.00, 1.40, D (1.00, 0.80, 0.40), 15 D (1.00, 0.90, 0.60) 0.60) 0.60) 0.50, 0.40) E (0.90, 0.70, 0.50, 0.45) 0.50) C (1.60, 1.30, D (0.80, 0.70, C (2.00, 1.80, C (2.00, 1.40, 1.00, 0.70), D (1.00, 0.70, 0.40, 0.35), 22 E (0.60, 0.30) 0.60) 0.50) D (1.00, 0.90, 0.50, 0.35) E (0.90, 0.70, 0.50, 0.45) 0.40, 0.35) C (1.60, 1.30, D (0.70, 0.40, C (1.00, 0.50), C (2.00, 1.40, 0.40), 0.35), 33 D (1.00, 0.70, E (0.60, 0.30) 0.60) D (1.00, 0.90, E (0.90, 0.70, 0.40, 0.35) 0.40) 0.40, 0.35) Revision: 13-Sep-16 Document Number: 40113 2 For technical questions, contact: tantalum vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000