TNPU e3
www.vishay.com
Vishay Draloric
Ultra Precision Thin Film Chip Resistors
FEATURES
Low temperature coefficients and tight
tolerances
Sulfur resistance verified according to
ASTM B 809
Superior moisture resistivity (85 C; 85 % RH)
Excellent overall stability at different
environmental conditions, e.g. 0.05 % (1000 h rated
power at 70 C)
AEC-Q200 qualified
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
TNPU e3 ultra precision thin film flat chip resistors combine
the proven reliability of TNPW e3 products with a most
Automotive
advanced level of precision and stability. This unique
Industrial equipment
combination makes the product perfectly suited for all
applications with outstanding requirements towards size, Test and measuring equipment
reliable precision and stability.
Medical equipment
Telecommunication
Instrumentation
TECHNICAL SPECIFICATIONS
DESCRIPTION TNPU0402 e3 TNPU0603 e3 TNPU0805 e3 TNPU1206 e3
Imperial size 0402 0603 0805 1206
Metric size code RR1005M RR1608M RR2012M RR3216M
Resistance range 100 to 100 k 100 to 100 k 100 to 332 k 100 to 511 k
Resistance tolerance 0.1 %; 0.05 % 0.1 %; 0.05 %; 0.02 %
Temperature coefficient 10 ppm/K; 5 ppm/K 10 ppm/K; 5 ppm/K; 2 ppm/K
(1)
Rated dissipation, P 0.063 W 0.1 W 0.125 W 0.25 W
70
Operating voltage, U AC /DC 50 V 75 V 150 V 200 V
max. RMS
(1)
Permissible film temperature, 125 C
F max.
Operating temperature range -55 C to 125 C
(1)
Internal thermal resistance 90 K/W 63 K/W 38 K/W 32 K/W
Permissible voltage against ambient
(insulation):
1 min; U 75 V 100 V 200 V 300 V
ins
-9
FIT 0.1 x 10 /h
observed
Note
(1)
Please refer to APPLICATION INFORMATION, see below
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
Please consider the application note Thermal Management in Surface-Mounted Resistor Applications
(www.vishay.com/doc?28844) for information on the general nature of thermal resistance.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 09-Jan-2020 Document Number: 28779
1
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPU e3
www.vishay.com
Vishay Draloric
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE STANDARD
TNPU0402 e3 0.063 W
TNPU0603 e3 0.100 W
Rated dissipation, P
70
TNPU0805 e3 0.125 W
TNPU1206 e3 0.250 W
Operating temperature range -55 C to 125 C
Permissible film temperature, 125 C
F max.
TNPU0402 e3 100 to 100 k
TNPU0603 e3 100 to 100 k
TNPU0805 e3 100 to 332 k
Max. resistance change at P for resistance range,
70
TNPU1206 e3 100 to 511 k
| R/R| after:
1000 h 0.05 %
8000 h 0.1 %
225 000 h 0.3 %
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
10 ppm/K 0.05 %
TNPU0402 e3 0.1 % 100 to 100 k
5 ppm/K
0.05 %
10 ppm/K 0.05 %
0.1 %
100 to 100 k
5 ppm/K 0.05 %
TNPU0603 e3 0.02 %
0.1 %
2 ppm/K 0.05 % 500 to 20 k
0.02 %
10 ppm/K 0.05 %
0.1 % 100 to 332 k
E24; E192
5 ppm/K 0.05 %
TNPU0805 e3 0.02 % 100 to 200 k
0.1 %
2 ppm/K 0.05 % 500 to 20 k
0.02 %
10 ppm/K 0.05 %
0.1 % 100 to 511 k
5 ppm/K 0.05 %
TNPU1206 e3 0.02 % 100 to 200 k
0.1 %
2 ppm/K 0.05 % 500 to 20 k
0.02 %
Revision: 09-Jan-2020 Document Number: 28779
2
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000