TNPW e3
www.vishay.com
Vishay
High Stability Thin Film Flat Chip Resistors
FEATURES
Superior moisture resistivity (85 C; 85 % RH)
Excellent overall stability at different
environmental conditions 0.05 % (1000 h
rated power at 70 C)
AEC-Q200 qualified
Single lot date code (optional)
Sulfur resistance verified according to
ASTM B 809
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
TNPW e3 precision thin film flat chip resistors are the perfect
Automotive
choice for most fields of modern electronics where highest
Industrial equipment
reliability and stability is of major concern. Typical
applications include automotive, industrial, test an d Test and measuring equipment
measuring equipment, and medical equipment.
Medical equipment
TECHNICAL SPECIFICATIONS
(1)
DESCRIPTION TNPW0201 e3 TNPW0402 e3 TNPW0603 e3 TNPW0805 e3 TNPW1206 e3 TNPW1210 e3
Imperial size 0201 0402 0603 0805 1206 1210
Metric size code RR0603M RR1005M RR1608M RR2012M RR3216M RR3225M
Resistance range 22 to 40 k 10 to 100 k 1 to 332 k 1 to 1 M 1 to 2 M 10 to 3.01 M
Resistance tolerance 0.5 %; 0.1 % 1 %; 0.5 %; 0.1 %
Temperature coefficient 25 ppm/K 50 ppm/K; 25 ppm/K; 15 ppm/K; 10 ppm/K
(2)
Rated dissipation, P 0.075 W 0.100 W 0.125 W 0.200 W 0.400 W 0.500 W
70
Operating voltage,
25 V 50 V 75 V 150 V 200 V 200 V
U AC or DC
max. RMS
Permissible film
155 C
(2)
temperature,
F max.
Operating temperature range -55 C to 155 C
(2)
Internal thermal resistance - 90 K/W 63 K/W 38 K/W 32 K/W -
Permissible voltage against
ambient (insulation):
1 min; U 50 V 75 V 100 V 200 V 300 V 300 V
ins
-9
Failure rate: FIT 0.1 x 10 /h
observed
Notes
(1)
AEC-Q200 qualification for ohmic values above 25 k pending
(2)
Please refer to APPLICATION INFORMATION
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
Please consider the application note Thermal Management in Surface-Mounted Resistor Applications
(www.vishay.com/doc?28844) for information on the general nature of thermal resistance.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 21-Feb-2020 Document Number: 28758
1
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TNPW e3
www.vishay.com
Vishay
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE STANDARD POWER
TNPW0201 e3 0.050 W 0.075 W
TNPW0402 e3 0.063 W 0.100 W
TNPW0603 e3 0.100 W 0.125 W
Rated dissipation, P
70
TNPW0805 e3 0.125 W 0.200 W
TNPW1206 e3 0.250 W 0.400 W
TNPW1210 e3 0.330 W 0.500 W
Operating temperature range -55 C to 125 C -55 C to 155 C
Permissible film temperature, 125 C 155 C
F max.
TNPW0201 e3 22 to 40 k 22 to 40 k
TNPW0402 e3 10 to 100 k 10 to 100 k
TNPW0603 e3 1 to 332 k 1 to 332 k
TNPW0805 e3 1 to 1 M 1 to 1 M
Max. resistance change at P for resistance range,
70
TNPW1206 e3 1 to 2 M 1 to 2 M
| R/R| after:
TNPW1210 e3 10 to 3.01 M 10 to 3.01 M
1000 h 0.05 % 0.10 %
8000 h 0.10 % 0.20 %
225 000 h 0.30 % 0.60 %
Note
The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to
different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the
circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please
consider the application note Thermal Management in Surface-Mounted Resistor Applications (www.vishay.com/doc?28844) for
information on the general nature of thermal resistance
Revision: 21-Feb-2020 Document Number: 28758
2
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000