TNPW e3 Vishay High Stability Thin Film Flat Chip Resistors FEATURES Low temperature coefficient and tight tolerances ( 0.1 % 10 ppm/K) Superior moisture resistivity 0.25 % (85 C 56 days 85 % RH) Excellent overall stability at different environmental conditions 0.05 % (1000 h rated power at 70 C) AEC-Q200 qualified (sizes 0402 to 1206) Waste gas resistant Material categorization: For definitions of compliance please see www.vishay.com/doc 99912 TNPW e3 precision thin film flat chip resistors are the perfect choice for most fields of modern electronics where highest APPLICATIONS reliability and stability is of major concern. Typical Test and measuring equipment applications include test and measuring equipment, medical equipment, industrial, and automotive. Medical equipment Industrial equipment Automotive STANDARD ELECTRICAL SPECIFICATIONS (1) (1) DESCRIPTION TNPW0402 e3 TNPW0603 e3 TNPW0805 e3 TNPW1206 e3 TNPW1210 e3 TNPW2010 e3 TNPW2512 e3 Metric size RR 1005M RR 1608M RR 2012M RR 3216M RR 3225M RR 5025M RR 6332M Resistance range 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M 10 to 3.01 M 10 to 4.99 M 10 to 8.87 M Resistance tolerance 1 % 0.5 % 0.1 % Temperature 50 ppm/K 25 ppm/K 15 ppm/K 10 ppm/K 50 ppm/K 25 ppm/K coefficent Rated dissipation, 0.063 W 0.1 W 0.125 W 0.25 W 0.33 W 0.4 W 0.5 W (2) P 70 Operating voltage, 50 V 75 V 150 V 200 V 200 V 300 V 300 V U AC/DC max. Permissible film 155 C temperature, max. F Operating - 55 C to 125 C (155 C) temperature range (3) Thermal resistance 870 K/W 550 K/W 440 K/W 220 K/W 170 K/W 140 K/W 110 K/W Max. resistance 10 to 100 k 10 to 332 k 10 to 1 M 10 to 2 M 10 to 3.01 M 10 to 4.99 M 10 to 8.87 M change at P R/R: 70 1000 h 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 0.05 % 8000 h 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 0.10 % 225 000 h 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % 0.30 % Insulation voltage: U 1 min 75 V 100 V 200 V 300 V 300 V 300 V 300 V ins Continuous 75 V 75 V 75 V 75 V 75 V 75 V 75 V Failure rate: -9 -9 -9 -9 -9 -9 -9 0.1 x 10 /h 0.1 x 10 /h 0.1 x 10 /h 0.1 x 10 /h 0.1 x 10 /h 0.1 x 10 /h 0.1 x 10 /h FIT observed Notes TNPW 0402 without marking. (1) Size not specified in EN 140401-801. (2) Rated voltage P x R. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). Using advanced temperature level may require special considerations towards the choice of circuit board and solder material. The rated dissipation applies only if the permitted film temperature is not exceeded. (3) Measuring conditions in accordance with EN 140401-801. www.vishay.com For technical questions, contact: thinfilmchip vishay.com Document Number: 28758 336 Revision: 27-Jun-12 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000TNPW e3 High Stability Thin Film Flat Chip Resistors Vishay DIMENSIONS DIMENSIONS AND MASS L W H T1/T2 MASS TYPE (mm) (mm) (mm) (mm) (mg) TNPW0402 e3 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.10 0.65 TNPW0603 e3 1.6 0.10 0.85 0.10 0.45 0.10 0.3 0.20 2 TNPW0805 e3 2.0 0.15 1.25 0.15 0.45 0.10 0.4 0.20 5.5 TNPW1206 e3 3.2 0.15 1.6 0.15 0.55 0.10 0.5 0.25 10 TNPW1210 e3 3.2 0.15 2.45 0.15 0.60 0.15 0.5 0.25 16 TNPW2010 e3 5.0 0.15 2.5 0.15 0.60 0.15 0.6 0.25 28 TNPW2512 e3 6.3 0.20 3.1 0.15 0.60 0.15 0.6 0.25 39 SOLDER PAD DIMENSIONS REFLOW SOLDERING WAVE SOLDERING TYPE a b l a b l (mm) (mm) (mm) (mm) (mm) (mm) TNPW0402 e3 0.4 0.6 0.5 - - - TNPW0603 e3 0.5 0.9 1.0 0.9 0.9 1.0 TNPW0805 e3 0.7 1.3 1.2 0.9 1.3 1.3 TNPW1206 e3 0.9 1.7 2.0 1.1 1.7 2.3 TNPW1210 e3 0.9 2.5 2.0 1.1 2.5 2.3 TNPW2010 e3 1.0 2.5 3.9 1.2 2.5 3.9 TNPW2512 e3 1.0 3.2 5.2 1.2 3.2 5.2 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TCR TOLERANCE RESISTANCE E-SERIES 1 % 10R to 100K 24 96 50 ppm/K 0.5 % 10R to 100K 24 192 0.1 % 47R to 100K 1 % 10R to 100K 24 96 TNPW0402 e3 25 ppm/K 0.5 % 10R to 100K 0.1 % 24 192 15 ppm/K 0.1 % 47R to 100K 10 ppm/K 0.1 % 1 % 10R to 332K 24 96 50 ppm/K 0.5 % 10R to 332K 24 192 0.1 % 1 % 10R to 332K 24 96 TNPW0603 e3 25 ppm/K 0.5 % 10R to 332K 0.1 % 24 192 15 ppm/K 0.1 % 47R to 332K 10 ppm/K 0.1 % 1 % 10R to 1M0 24 96 50 ppm/K 0.5 % 10R to 1M0 24 192 0.1 % 1 % 10R to 1M0 24 96 TNPW0805 e3 25 ppm/K 0.5 % 10R to 1M0 0.1 % 24 192 15 ppm/K 0.1 % 47R to 1M0 10 ppm/K 0.1 % 1 % 10R to 2M0 24 96 50 ppm/K 0.5 % 10R to 2M0 24 192 0.1 % 1 % 10R to 2M0 24 96 TNPW1206 e3 25 ppm/K 0.5 % 10R to 2M0 0.1 % 24 192 15 ppm/K 0.1 % 47R to 2M0 10 ppm/K 0.1 % Document Number: 28758 For technical questions, contact: thinfilmchip vishay.com www.vishay.com Revision: 27-Jun-12 337 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000