TOMC16031003BUF Vishay

TOMC www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Surface Mount Network FEATURES 0.090 (2.29 mm) maximum seated height Rugged, molded case construction (0.22 wide) Highly stable thin film ratio stability Available (R 0.015 % at 70 C for 2000 h) Available Low temperature coefficient, 25 ppm/C (-55 C to +125 C) Wide resistance range 100 to 100 k Isolated / bussed circuits Material categorization: for definitions of compliance Actual Size please see www.vishay.com/doc 99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Vishay Dale Thin Film offers standard circuits in 16 pins in a Please see the information / tables in this datasheet for details medium body molded surface mount package. The TYPICAL PERFORMANCE networks are available over a resistance range of 100 to 100 k. The network features tight ratio tolerances and ABSOLUTE TRACKING close TCR tracking. In addition to the standards shown, TCR 25 5 custom circuits are available upon request. ABSOLUTE RATIO TOL. 0.1 0.025 SCHEMATIC The 01 circuit provides 15 The 03 circuit provides a nominally equal resistors, choice of 8 nominally each connected between equal resistors with each Ref. a common lead (16) and a resistor isolated from all discrete PC board pin. others and wired directly Ref. across. PIN 1 PIN 1 TOMC-1603 TOMC-1601 03 circuit 01 circuit STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS CONDITIONS Material Passivated nichrome - Pin/Lead Number 16 - Resistance Range 100 to 100 kper resistor - TCR: Absolute 25 ppm/C -55 C to +125 C TCR: Tracking 5 ppm/C -55 C to +125 C Tolerance: Absolute 0.1 % to 1 % +25 C Tolerance: Ratio 0.025 % to 0.5 % +25 C 50 mW = PIN 16 common Power Rating: Resistor Maximum at +70 C 100 mW = isolated Power Rating: Package 750 mW Maximum at +70 C Stability: Absolute R 0.05 % 2000 h at +70 C Stability: Ratio R 0.015 % 2000 h at +70 C Voltage Coefficient 0.1 ppm/V - Working Voltage 100 V max. not to exceed P x R - Operating Temperature Range -55 C to +125 C - Storage Temperature Range -55 C to +150 C - Noise < -30 dB - Thermal EMF 0.08 V/C - Shelf Life Stability: Absolute R 0.01 % 1 year at +25 C Shelf Life Stability: Ratio R 0.002 % 1 year at +25 C Revision: 12-May-2021 Document Number: 60008 1 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 TOMC www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION INCHES MILLIMETERS A 0.350 8.89 B 0.400 10.16 A G D C 0.440 11.176 E typical H Resistance D 0.050 1.27 Date E 0.018 0.457 code Centered F 0.160 4.06 TOMC16XXRRRR maximum 7 Vishay F J K L 0.015 marking G 0.08 2.03 symbol 7 (1.27) area Lead 1 YYWW H 0.036 0.914 indicator J 0.22 5.59 Schematic B Q P K 0.244 6.20 Centered maximum, M R marking area L 0.30 7.52 C M 0.045 1.14 N S N 0.003 0.076 7 7 P 0.005 1.27 Q 0.008 0.203 R 0.085 2.16 S 0.003 0.076 Note The tolerance and package code is NOT a member of the part marking. For space considerations the part number may be broken up, i. e.: TOMC1603 1002 YYWW MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material High purity alumina Body Molded epoxy Terminals Copper alloy Lead (Pb)-free Option 100 % matte tin Tin Lead Option Sn85 Tin Lead and Lead (Pb)-free Finish Plated DERATING CURVE Axis Title 0.8 10000 TOMC-1601, 0.7 TOMC-1603 0.6 1000 0.5 0.4 0.3 100 Single resistor TOMC-1601 0.2 Single resistor TOMC-1603 0.1 0 10 -55 -25 0 25 50 70 100 125 150 Temperature (C) Revision: 12-May-2021 Document Number: 60008 2 For technical questions, contact: thinfilm vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line Power (W) 1st line 2nd line