VJ Commercial Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
C0G (NP0) and X7R dielectrics offered
C0G (NP0) is an ultra-stable dielectric offering a
very low Temperature Coefficient of Capacitance
(TCC)
C0G (NP0) offers low dissipation
Excellent aging characteristics
Ideal for decoupling and filtering (X7R)
Available
Ideal for surge suppression and high voltage
applications
Wide range of case sizes, voltage ratings and capacitance
values
Wet build process
Reliable Noble Metal Electrode (NME) system
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Timing and tuning circuits
Sensor and scanner applications
Decoupling and filtering
Surge suppression
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC X7R DIELECTRIC
GENERAL SPECIFICATION GENERAL SPECIFICATION
Note Note
Electrical characteristics at +25 C unless otherwise specified Electrical characteristics at +25 C unless otherwise specified
Operating Temperature: -55 C to +150 C
Operating Temperature: -55 C to +150 C
(above +125 C changed characteristics)
(above +125 C changed characteristics)
Capacitance Range: 1 pF to 56 nF Capacitance Range: 120 pF to 6.8 F
Voltage Range: 25 V to 1000 V Voltage Range: 16 V to 1000 V
DC DC DC DC
Temperature Coefficient of Capacitance (TCC): Temperature Coefficient of Capacitance (TCC):
0 ppm/C 30 ppm/C from -55 C to +125 C 15 % from -55 C to +125 C, with 0 V applied
DC
Dissipation Factor (DF): Dissipation Factor (DF):
0.1 % maximum at 1.0 V and 16 V / 25 V ratings: 3.5 % maximum at 1.0 V and 1 kHz
RMS RMS
1 MHz for values 1000 pF > 25 V ratings: 2.5 % maximum at 1.0 V and 1 kHz
RMS
0.1 % maximum at 1.0 V and
RMS
Insulating Resistance:
1 kHz for values > 1000 pF
at +25 C 100 000 M min. or 1000 F whichever is less
Insulating Resistance: at +125 C 10 000 M min. or 100 F whichever is less
at +25 C 100 000 M min. or 1000 F whichever is less
Aging Rate: 1 % maximum per decade
at +125 C 10 000 M min. or 100 F whichever is less
Dielectric Strength Test:
Aging Rate: 0 % maximum per decade
performed per method 103 of EIA 198-2-E.
Dielectric Strength Test:
Applied test voltages
performed per method 103 of EIA 198-2-E.
250 V -rated: 250 % of rated voltage
DC
Applied test voltages 500 V -rated: min. 150 % of rated voltage
DC
200 V -rated: 250 % of rated voltage 630 V , 1000 V -rated: min. 120 % of rated voltage
DC DC DC
500 V -rated: 200 % of rated voltage
DC
630 V ,1000 V -rated: 150 % of rated voltage
DC DC
Revision: 23-Aug-2018 Document Number: 45199
1
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
MAXIMUM VOLTAGE
DIELECTRIC CASE
(V)
MINIMUM MAXIMUM
0402 100 1.0 pF 220 pF
0603 250 1.0 pF 1.0 nF
0805 500 1.0 pF 4.7 nF
1206 630 1.0 pF 10 nF
1210 630 56 pF 12 nF
C0G (NP0)
1808 1000 18 pF 10 nF
1812 1000 39 pF 22 nF
1825 500 100 pF 39 nF
2220 1000 270 pF 47 nF
2225 1000 270 pF 56 nF
0402 100 120 pF 47 nF
0603 200 330 pF 150 nF
0805 250 330 pF 470 nF
1206 630 330 pF 1.0 F
1210 630 390 pF 1.0 F
X7R 1808 1000 470 pF 270 nF
1812 1000 1.0 nF 1.0 F
1825 1000 10 nF 2.7 F
2220 500 15 nF 2.2 F
2225 1000 33 nF 4.7 F
3640 500 27 nF 6.8 F
Note
Detail ratings see Selection Chart
Revision: 23-Aug-2018 Document Number: 45199
2
For technical questions, contact: mlcc@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000