VJ Safety Certified Capacitors www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Available Specialty: safety certified capacitors AEC-Q200 qualified available with PPAP Wet build process Reliable Noble Metal Electrode (NME) system Flexible termination W for improved (1) bending capability performance Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Note (1) W flexible termination under qualification APPLICATIONS Power supplies EMI and AC line filtering EV charging systems AC equipment and appliances Lighting strike and voltage surge protection Isolators Facsimile and telephone ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified Operating Temperature: -55 C to +125 C Aging Rate: (1) C0G (NP0): 0 % maximum per decade Capacitance Range X1 / Y2 : X7R: 1 % maximum per decade C0G (NP0): 10 pF to 1.0 nF X7R: 100 pF to 4.7 nF Voltage Proof Test: (1) Capacitance Range X2 : X1 / Y2: min. 1500 V AC C0G (NP0): 10 pF to 390 pF X2: min. 1075 V DC X7R: 100 pF to 12 nF Peak Impulse Voltage: Voltage Range: 250 V AC X1 / Y2: 5000 V Temperature Coefficient of Capacitance (TCC): X2: 2500 V C0G (NP0): 0 ppm/C 30 ppm/C from -55 C to +125 C Voltage Rating DC: X7R: 15 % from -55 C to +125 C, with 0 V applied DC X1 / Y2: 2000 V DC (1) Dissipation Factor (DF) : X2: 1500 V DC C0G (NP0): 0.1 % maximum Climatic Category According to EN 60068-1: 55/125/21 X7R: 2.5 % maximum Insulating Resistance: at +25 C 100 000 M min. or 1000 F whichever is less at +125 C 10 000 M min. or 100 F whichever is less Note (1) Test conditions per IEC 60384-14: C0G (NP0): 1.0 V at 1 MHz RMS X7R: 1.0 V at 1 kHz RMS Revision: 04-Feb-2021 Document Number: 45255 1 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VJ Safety Certified Capacitors www.vishay.com Vishay Vitramon QUICK REFERENCE DATA CAPACITANCE MAXIMUM VOLTAGE DIELECTRIC CASE (V ) AC MINIMUM MAXIMUM 2008 250 10 pF 220 pF C0G (NP0) (X1 / Y2) 2220 250 47 pF 1.0 nF C0G (NP0) (X2) 2008 250 10 pF 390 pF 2008 250 100 pF 1.0 nF X7R (X1 / Y2) 2220 250 270 pF 4.7 nF 2008 250 100 pF 2.7 nF X7R (X2) 2220 250 270 pF 12 nF Notes Detail ratings see Selection Chart Size 2008 is compatible with 1808 solderlands and full conform with the IEC-60384-14 requirements for creepage distance ORDERING INFORMATION (2) VJ2008 Y 102 K X U S T CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION AC VOLTAGE MARKING PACKAGING PROCESS CODE NOMINAL CODE TOLERANCE RATING CODE 2008 A = C0G (NP0) Expressed in C0G (NP0): X = Ni barrier U = 250 V S = marked T = 7 reel / X1 = X1 / Y2 AC 2220 Y = X7R picofarads (pF). J = 5 % 100 % matte tin (see Part Marking plastic tape X2 = X2 The first two K = 10 % plate finish table below) Vishay digits are W = Ni barrier automotive significant, the X7R: with flexible grade per third is a multiplier. K = 10 % layer, 100 % customer Examples: M = 20 % matte tin plate request, (1) 101 = 100 pF finish add A: 102 = 1000 pF X1A = X1 / Y2 103 = 10 000 pF X2A = X2 Notes Detail ratings see Selection Chart (1) W flexible termination under qualification (2) Process code must be added to control products and requirements PART MARKING ST ND 1 DIGIT 2 DIGIT MARKING MANUFACTURER DIELECTRIC AND RATING VC C = C0G (NP0), X1 / Y2 - X termination option VT T = C0G (NP0), X2 - X termination option VD D = C0G (NP0), X1 / Y2 - W termination option VU U = C0G (NP0), X2 - W termination option V = Vishay VA A = X7R, X1 / Y2 - X termination option VM M = X7R, X2 - X termination option VB B = X7R, X1 / Y2 - W termination option VN N = X7R, X2 - W termination option Revision: 04-Feb-2021 Document Number: 45255 2 For technical questions, contact: mlcc vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000