End of Life May-2021 VLMR32.., VLMK32.., VLMY32.. www.vishay.com Vishay Semiconductors Power SMD LED PLCC-4 FEATURES Available in 8 mm tape High brightness SMD LED Luminous intensity and color categorized per packing unit Luminous intensity ratio per packing unit I /I 1.6 Vmax. Vmin. ESD-withstand voltage: Up to 2 kV according 19210 to JESD22-A114-B Suitable for all soldering methods according DESCRIPTION to CECC 00802 and J-STD-020 The VLM.32.. series is an advanced development in terms of Preconditioning according to JEDEC level 2a heat dissipation. Qualified according to JEDEC moisture sensitivity level 2a The leadframe profile of this PLCC-4 SMD package is AEC-Q101 qualified optimized to reduce the thermal resistance. Compatible with IR reflow solder processes according to This allows higher drive current and doubles the light output CECC 00802 and J-STD-020C compared to Vishays high intensity SMD LED in PLCC-2 package. Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 PRODUCT GROUP AND PACKAGE DATA APPLICATIONS Product group: LED Interior and exterior lighting Package: SMD PLCC-4 Indicator and backlighting purposes for audio, video, Product series: power LCDs, switches, symbols, illuminated advertising etc. Angle of half intensity: 60 Illumination purpose, alternative to incandescent lamps General use PARTS TABLE LUMINOUS WAVELENGTH FORWARD VOLTAGE INTENSITY at I at I at I F F F (nm) (V) PART COLOR TECHNOLOGY (mcd) (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMR32ABBB-GS08 Red 1400 - 2800 50 620 - 630 50 2.0 2.2 2.8 50 AlInGaP on Si VLMK32ABBB-GS08 Amber 1400 - 2850 50 610 - 621 50 1.85 - 3.03 50 AlInGaP on Si VLMY32ABBB-GS08 Yellow 1400 - 2850 50 585 588 594 50 1.85 - 3.03 50 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLMR32.., VLMK32.., VLMY32.. PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage V 5V R Forward current I 70 mA F Power dissipation P 200 mW V Junction temperature T 125 C j Operating temperature range T -40 to +100 C amb Storage temperature range T -40 to +100 C stg Thermal resistance junction-to-ambient Mounted on PC board FR4 R 290 K/W thJA Note (1) Driving the LED in reverse direction is suitable for short term application Rev. 1.4, 01-Feb-2021 Document Number: 81819 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000End of Life May-2021 VLMR32.., VLMK32.., VLMY32.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMR32.., RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 50 mA I 1400 - 2800 mcd F V Dominant wavelength I = 50 mA 620 - 630 nm F d Angle of half intensity I = 50 mA - 60 - F Spectral bandwidth at 50 % I I = 50 mA -20- nm rel max. F (2) Forward voltage I = 50 mA V 2.0 2.2 2.8 V F F Reverse current V = 5 V I -0.01 10 A R R Notes (1) In one package unit I /I 1.6 Vmax. Vmin. (2) Forward voltages are tested ata current pulse duration of 1 ms and a tolerance of 0.1 V OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMK32.., AMBER PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 50 mA I 1400 - 2850 mcd F V Dominant wavelength I = 50 mA 610 - 621 nm F d Angle of half intensity I = 50 mA - 60 - F Spectral bandwidth at 50 % I I = 50 mA -18- nm rel max. F (2) Forward voltage I = 50 mA V 1.85 - 3.03 V F F Reverse current V = 5 V I -0.01 10 A R R Notes (1) In one package unit I /I 1.6 Vmax. Vmin. (2) Forward voltages are tested ata current pulse duration of 1 ms and a tolerance of 0.1 V OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMY32.., YELLOW PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 50 mA I 1400 - 2850 mcd F V Dominant wavelength I = 50 mA 585 588 594 nm F d Angle of half intensity I = 50 mA - 60 - F Spectral bandwidth at 50 % I I = 50 mA -18- nm rel max. F (2) Forward voltage I = 50 mA V 1.85 - 3.03 V F F Reverse current V = 5 V I -0.01 10 A R R Notes (1) In one package unit I /I 1.6 Vmax. Vmin. (2) Forward voltages are tested ata current pulse duration of 1 ms and a tolerance of 0.1 V LUMINOUS INTENSITY CLASSIFICATION COLOR CLASSIFICATION YELLOW AMBER LUMINOUS INTENSITY (mcd) GROUP GROUP DOMINANT WAVELENGTH (nm) MIN. MAX. MIN. MAX. MIN. MAX. AB 1400 1800 BA 1800 2240 W 585 588 - - X 588 591 - - BB 2240 2850 X 591 594 - - Note Y - - 610 615 Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. Z - - 615 621 The above type numbers represent the order groups which Note include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on Wavelengths are tested at a current pulse duration of 25 ms and each reel).In order to ensure availability, single brightness an accuracy of 1 nm groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped CROSSING TABLE in any one reel. VISHAY OSRAM In order to ensure availability, single wavelength groups will not be orderable VLMK32ABBB-GS08 LAE6SF-AABB VLMY32ABBB-GS08 LYE6SF-AABB Rev. 1.4, 01-Feb-2021 Document Number: 81819 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000