VLMS3100 www.vishay.com Vishay Semiconductors Standard SMD LED PLCC-2 FEATURES SMD LED with exceptional brightness Luminous intensity categorized Compatible with automatic placement equipment EIA and ICE standard package Compatible with infrared, vapor phase and 948553 wave solder processes according to CECC Available in 8 mm tape DESCRIPTION Low profile package This device has been designed for applications requiring Non-diffused lens: excellent for coupling to narrow brightness and color selection. light pipes and backlighting The package of this device is the PLCC-2. Low power consumption It consists of a lead frame which is embedded in a white Luminous intensity ratio in one packaging uni t thermoplast. The reflector inside this package is filled up I /I 1.6 Vmax. Vmin. with clear epoxy. Preconditioning according to JEDEC level 2a PRODUCT GROUP AND PACKAGE DATA ESD-withstand voltage: up to 1 kV according to Product group: LED JESD22-A114-B Package: SMD PLCC-2 AEC-Q101 qualified Product series: standard Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 Angle of half intensity: 60 APPLICATIONS Automotive: backlighting in dashboards and switches Telecommunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight in office equipment Flat backlight for LCDs, switches, and symbols General use PARTS TABLE LUMINOUS INTENSITY WAVELENGTH FORWARD VOLTAGE at I at I at I (mcd) F (nm) F (V) F PART COLOR TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLMS3100-GS08 Red 2.8 7.1 - 10 624 630 636 10 - 2.0 2.6 20 GaAsP on GaP VLMS3100-GS18 Red 2.8 7.1 - 10 624 630 636 10 - 2.0 2.6 20 GaAsP on GaP Rev. 1.6, 28-May-2019 Document Number: 81214 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VLMS3100 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLMS3100 PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage V 6V R DC forward current T 60 C I 30 mA amb F Surge forward current t 10 s I 0.5 A p FSM Power dissipation T 60 C P 100 mW amb V Junction temperature T 100 C j Operating temperature range T -40 to +100 C amb Storage temperature range T -40 to +100 C stg Soldering temperature t 5 s T 260 C sd 2 Thermal resistance junction-to-ambient Mounted on PC board (pad size > 16 mm)R 400 K/W thJA Note (1) Driving LED in reverse direction is suitable for short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLMS3100, RED PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT (1) Luminous intensity I = 10 mA I 2.8 7.1 - mcd F V Dominant wavelength I = 10 mA 624 630 636 nm F d Peak wavelength I = 10 mA -640 - nm F p Angle of half intensity I = 10 mA - 60 - F Forward voltage I = 20 mA V -2.0 2.6 V F F Reverse voltage I = 10 A V 6- - V R R Junction capacitance V = 0 V, f = 1 MHz C -7 - pF R j Temperature coefficient of V I = 20 mA TC --1.8- mV/K F F VF Temperature coefficient of I = 10 mA TC -0.05- nm/K d F d Note (1) In one packing unit I /I 1.6 Vmax. Vmin. LUMINOUS INTENSITY CLASSIFICATION CROSSING TABLE GROUP LIGHT INTENSITY (mcd) VISHAY OSRAM STANDARD OPTIONAL MIN. MAX. VLMS3100 LST670-J1L2 1 2.80 3.55 H 2 3.55 4.50 1 4.50 5.60 J 2 5.60 7.10 1 7.10 9.00 K 2 9.00 11.20 1 11.20 14.00 L 2 14.00 18.00 Note Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable Rev. 1.6, 28-May-2019 Document Number: 81214 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000