VLWR9630, VLWR9632 www.vishay.com Vishay Semiconductors TELUX LED FEATURES High luminous flux Supreme heat dissipation: R is 90 K/W thJP High operating temperature: = -40 C to +110 C T amb Meets SAE and ECE color requirements for the automobile industry for color red Packed in tubes for automatic insertion 19232 Luminous flux, forward voltage, and color DESCRIPTION categorized for each tube The TELUX series is a clear, non diffused LED for Small mechanical tolerances allow precise applications where supreme luminous flux is required. It usage of external reflectors or lightguides is designed in an industry standard 7.62 mm square Compatible with wave solder processes according to package utilizing highly developed with super bright, CECC 00802 AllnGaP technology. ESD-withstand voltage: up to 2 kV according to The supreme heat dissipation of TELUX allows applications JESD 22-A114-B at high ambient temperatures. AEC-Q101 qualified All packing units are binned for luminous flux, forward Material categorization: for definitions of compliance voltage and color to achieve the most homogenous light please see www.vishay.com/doc 99912 appearance in application. SAE and ECE color requirements for automobile application APPLICATIONS are available for color red. Exterior lighting PRODUCT GROUP AND PACKAGE DATA Tail-, stop-, and turn signals of motor vehicles Product group: LED Traffic signals and signs Package: TELUX Product series: power Angle of half intensity: 30 PARTS TABLE LUMINOUS FLUX WAVELENGTH FORWARD VOLTAGE at I at I at I F F (V) F (mlm) (nm) PART COLOR TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLWR9630 Red 4000 8500 12 200 70 611 616 634 70 1.83 2.2 3.03 70 AlInGaP on Si VLWR9632 Red 6000 - 12 200 70 611 616 634 70 1.83 2.2 3.03 70 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLWR9630, VLWR9632 PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage I = 100 A V 10 V R R DC forward current T 85 C I 70 mA amb F Surge forward current t 10 s I 0.1 A p FSM Power dissipation P 212 mW V Junction temperature T 125 C j Operating temperature range T -40 to +110 C amb Storage temperature range T -40 to +110 C stg t 5 s, 1.5 mm from body preheat Soldering temperature T 260 C sd temperature 100 C / 30 s 2 Thermal resistance junction-to-ambient With cathode heatsink of 70 mm R 200 K/W thJA Thermal resistance junction-to-pin R 90 K/W thJP Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.8, 13-Dec-2019 Document Number: 81818 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VLWR9630, VLWR9632 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLWR9630, VLWR962, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Total flux I = 70 mA, R = 200 K/W VLWR9630 4000 8500 12 200 mlm F thJA V Total flux I = 70 mA, R = 200 K/W VLWR9632 6000 - 12 200 mlm F thJA V Luminous intensity/total flux I = 70 mA, R = 200 K/W I / -0.8 - mcd/mlm F thJA V V Dominant wavelength I = 70 mA, R = 200 K/W 611 616 634 nm F thJA d Peak wavelength I = 70 mA, R = 200 K/W - 624 - nm F thJA p Angle of half intensity I = 70 mA, R = 200 K/W - 30 - F thJA Total included angle 90 % of total flux captured -75 - 0.9 Forward voltage I = 70 mA, R = 200 K/W V 1.83 2.2 3.03 V F thJA F Reverse voltage V 10 20 - V R Temperature coefficient < I = 70 mA TC - 0.065 - nm/K d F d Temperature coefficient V I = 70 mA, T > -25 C TCV --2 - mV/K F F F FORWARD VOLTAGE CLASSIFICATION LUMINOUS FLUX CLASSIFICATION FORWARD VOLTAGE (V) LUMINOUS FLUX (mlm) GROUP GROUP MIN. MAX. MIN. MAX. Y 1.83 2.07 H 4000 6100 Z 1.95 2.19 I 5000 7300 0 2.07 2.31 K 6000 9700 1 2.19 2.43 L 7000 12 200 2 2.31 2.55 Note 3 2.43 2.67 Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of 11 %. 4 2.55 2.79 The above type numbers represent the order groups which 5 2.67 2.91 include only a few brightness groups. Only one group will be 6 2.79 3.03 shipped on each tube (there will be no mixing of two groups o n each tube). Note In order to ensure availability, single brightness groups will not Voltages are tested at a current pulse duration of 1 ms be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. COLOR CLASSIFICATION In order to ensure availability, single wavelength groups will not DOM. WAVELENGTH (nm) be orderable GROUP MIN. MAX. 1 611 618 2 614 622 3 616 634 Note Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm Rev. 1.8, 13-Dec-2019 Document Number: 81818 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000