VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors TELUX LED FEATURES High luminous flux Supreme heat dissipation: R is 90 K/W thJP High operating temperature: T = -40 C to +110 C amb Meets SAE and ECE color requirements for the automobile industry for color red Packed in tubes for automuioatic insertion 19232 Luminous flux, forward voltage, and color DESCRIPTION categorized for each tube The TELUX series is a clear, non diffused LED for Small mechanical tolerances allow precise applications where supreme luminous flux is required. usage of external reflectors or lightguides It is designed in an industry standard 7.62 mm square Compatible with wave solder processes according to package utilizing highly developed super bright, AllnGaP CECC 00802 technology. ESD-withstand voltage: up to 2 kV according to The supreme heat dissipation of TELUX allows applications JESD 22-A114-B at high ambient temperatures. AEC-Q101 qualified All packing units are binned for luminous flux, forward Material categorization: for definitions of compliance voltage, and color to achieve the most homogeneous light please see www.vishay.com/doc 99912 appearance in application. APPLICATIONS PRODUCT GROUP AND PACKAGE DATA Exterior lighting Product group: LED Tail-, stop-, and turn signals of motor vehicles Package: TELUX Traffic light and signs Product series: power Angle of half intensity: 45 PARTS TABLE LUMINOUS FLUX WAVELENGTH FORWARD VOLTAGE at I at I at I F F F (mlm) (nm) (V) PART COLOR TECHNOLOGY (mA) (mA) (mA) MIN. TYP. MAX. MIN. TYP. MAX. MIN. TYP. MAX. VLWY9930 Yellow 4000 8500 12 200 70 585 592 597 70 1.83 2.2 3.03 70 AlInGaP on Si VLWY9932 Yellow 6000 9000 12 200 70 587 592 597 70 1.95 2.2 2.67 70 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb VLWY9930, VLWY9932 PARAMETER TEST CONDITION SYMBOL VALUE UNIT (1) Reverse voltage V 10 V R DC forward current T 85 C I 70 mA amb F Surge forward current t 10 s I 0.1 A p FSM Power dissipation P 212 mW V Junction temperature T 125 C j Operating temperature range T -40 to +110 C amb Storage temperature range T -40 to +110 C stg t 5 s, 1.5 mm from body preheat Soldering temperature T 260 C sd temperature 100 C / 30 s 2 Thermal resistance junction / ambient With anode heatsink of 70 mm R 200 K/W thJA Thermal resistance junction / pin R 90 K/W thJP Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.7, 02-Oct-15 Document Number: 81815 1 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VLWY9930, VLWY9932 www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb VLWY9930, VLWY9932, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT VLWY9930 4000 8500 12 200 mlm V Total flux I = 70 mA, R = 200 K/W F thJA VLWY9932 6000 9000 12 200 mlm V Luminous intensity/total flux I = 70 mA, R = 200 K/W I / -0.7 - mcd/mlm F thJA V V VLWY9930 585 592 597 nm d Dominant wavelength I = 70 mA, R = 200 K/W F thJA VLWY9932 587 592 597 nm d Peak wavelength I = 70 mA, R = 200 K/W - 595 - nm F thJA p Angle of half intensity I = 70 mA, R = 200 K/W - 45 - deg F thJA Total included angle 90 % of total flux captured - 100 - deg 0.9 V VLWY9930 V 1.83 2.2 3.03 V F Forward voltage I = 70 mA, R = 200 K/W F thJA VLWY9932 V 1.95 2.2 2.67 V F Reverse voltage V 10 20 - V R Temperature coefficient of I = 70 mA T -0.1 - nm/K dom F C dom Temperature coefficient of V I = 70 mA, T > -25 C T --2 - mV/K F F CVF LUMINOUS FLUX CLASSIFICATION FORWARD VOLTAGE CLASSIFICATION LUMINOUS FLUX (mlm) FORWARD VOLTAGE (V) GROUP GROUP MIN. MAX. MIN. MAX. H 4000 6100 Y 1.83 2.07 I 5000 7300 Z 1.95 2.19 K 6000 9700 0 2.07 2.31 L 7000 12 200 1 2.19 2.43 2 2.31 2.55 Note 3 2.43 2.67 Luminous flux is tested at a current pulse duration of 25 ms and an accuracy of 11 %. 4 2.55 2.79 The above type numbers represent the order groups which 5 2.67 2.91 include only a few brightness groups. Only one group will be shipped on each tube (there will be no mixing of two groups on 6 2.79 3.03 each tube). Note In order to ensure availability, single brightness groups will be Voltages are tested at a current pulse duration of 1 ms. not orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped in any one tube. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION DOMINANT WAVELENGTH (nm) GROUP MIN. MAX. 0 585 588 1 587 591 2 589 594 3 592 597 Note Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. Rev. 1.7, 02-Oct-15 Document Number: 81815 2 For technical questions, contact: LED vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000