VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors High Speed Optocoupler, 10 MBd, SOIC-8 Package FEATURES Single channel 1 8 NC V Choice of CMR performance of 15 kV/s, CC 2 7 5 kV/s, and 1 kV/s A V E 3 6 V High speed: 10 MBd typical C O 4 5 NC GND + 5 V CMOS compatibility VO0600T, VO0601T, VO0611T Pure tin leads Dual channel Guaranteed AC and DC performance over 1 8 A1 V temperature: - 40 C to + 100 C temp. range CC C1 2 7 V Meets IEC 60068-2-42 (SO ) and IEC 60068-2-43 (H S) 2 2 O1 requirements C2 3 6 V 18921-17 O2 4 5 Low input current capability: 5 mA A2 GND Material categorization: For definitions of compliance VO0630T, VO0631T, VO0661T 18921-26 please see www.vishay.com/doc 99912 V DE APPLICATIONS DESCRIPTION Microprocessor system M interface The VO06xxT family are single and dual channel 10 MBd PLC, ATE input/output isolation optocoupler utilizing a high efficient input LED coupled with Computer peripheral interface: SPI an integrated optical photodiode IC detector. The detector Digital fieldbus isolation: CC-Link, DeviceNet, profibus, has an open drain NMOS-transister output, providing less SDS leakage compared to an open collector Schottky clamped transister output. For the single channel type, an enable High speed A/D and D/A conversion function on pin 7 allows the detector to be strobed. The AC plasma display panel level shifting internal shield provides a guaranteed common mode Multiplexed data transmission transient immunity of 5 kV/s for the VO0601T and VO0631T and 15 kV/s for the VO0611T and VO0661T. The use of a Digital control power supply 0.1 F bypass capacitor connected between pin 5 and 8 is Ground loop elimination recommended. AGENCY APPROVALS UL1577, file no. E52744 cUL-file no. E52744, equivalent to CSA bulletin 5A DIN EN 60747-5-5 (VDE 0884-5), available with option 1 ORDERING INFORMATION SIOC-8 V O 06 - X 0 0 1 T TAPE AND PART NUMBER PACKAGE OPTION 6.1 mm REEL 1 CHANNEL 2 CHANNELS AGENCY CERTIFIED/PACKAGE CMR (kV/s) CMR (kV/s) UL, cUL 1 5 15 1 5 15 SOIC-8 VO0600T VO0601T VO0611T VO0630T VO0631T VO0661T UL, cUL, VDE 1 5 15 1 5 15 SOIC-8 - VO0601-X001T - - VO0631-X001T - Rev. 2.0, 25-Oct-12 Document Number: 84607 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VO0600T, VO0601T, VO0611T, VO0630T, VO0631T, VO0661T www.vishay.com Vishay Semiconductors TRUTH TABLE (positive logic) (1) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H Note (1) Only applicable for single channel devices ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Average forward current (single channel) I 20 mA F Average forward current (dual channel) I 15 mA F Reverse input voltage V 5V R Enable input voltage (single channel) V V + 0.5 V V E CC Enable input current (single channel) I 5mA E Surge current t = 100 s I 200 mA FSM Output power dissipation (single channel) P 35 mW diss Output power dissipation P 25 mW diss (per channel for dual channel) OUTPUT Supply voltage 1 min maximum V 7V CC Output current I 50 mA O Output voltage V 7V O Output power dissipation (single channel) P 85 mW diss Output power dissipation P 60 mW diss (per channel for dual channel) COUPLER Isolation test voltage t = 1 s V 4000 V ISO RMS Storage temperature T - 55 to + 150 C stg Operating temperature T - 40 to + 100 C amb Lead solder temperature for 10 s 260 C (1) Solder reflow temperature for 1 min 260 C Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. RECOMMENDED OPERATING CONDITION PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Operating temperature T - 40 100 C amb Supply voltage V 4.5 5.5 V CC Input current low level I 0 250 A FL Input current high level I 515mA FH Output pull up resistor R 330 4K L Logic high enable voltage V 2V V EH CC Logic low enable voltage V 0.0 0.8 V EL Fanout R = 1 kN5- L Rev. 2.0, 25-Oct-12 Document Number: 84607 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000