VOM3052, VOM3053 www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing, 1.5 kV/s dV/dt, 600 V FEATURES High static dV/dt > 1.5 kV/s Input sensitivity I = 5 mA and 10 mA FT 4 MT2 A 1 On-state RMS current I = 70 mA T(RMS) 600 V peak off-state blocking voltage C 2 3 MT1 Isolation test voltage 3750 V RMS Material categorization: i179066 for definitions of compliance please see www.vishay.com/doc 99912 APPLICATIONS DESCRIPTION Consumer appliances The VOM3052 and VOM3053 phototriac consist a GaAs IRLED optically coupled to a photosensitive non-zero Triac drives crossing TRIAC packaged in a SOP-4 package. It ha s Solid-state relays a LED trigger current of 5 mA for VOM3053 and 10 mA for Industrial controls VOM3052. Office equipment The VOM3052 and VOM3053 phototriac isolate low-voltage Lighting controls logic from 120 V , 240 V , and 380 V lines to control AC AC AC resistive, inductive, or capacitive loads including motors, AGENCY APPROVALS solenoids, high current thyristors or TRIAC and relays. UL1577, file no. E52744, double protection cUL-file no. E52744, equivalent to CSA bulletin 5A VDE 0884-5, DIN EN 60747-5-5 CQC: GB8898, GB4943 ORDERING INFORMATION SOP-4 VO M 3 0 5 X T PART NUMBER 7.21 mm AGENCY CERTIFIED/PACKAGE TRIGGER CURRENT I FT UL, cUL, CQC 5 mA 10 mA SOP-4 VOM3053T VOM3052T SOP-4 180 orientation VOM3053T3 - VDE, UL, cUL, CQC 5 mA 10 mA SOP-4 VOM3053-X001T VOM3052-X001T Notes For additional information on the available options refer to option information. The product is available only on tape and reel. ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage V 6V R Forward current I 60 mA F Peak surge current 100 s, 200 pps I 0.5 A FSM Power dissipation P 100 mW diss Rev. 1.5, 27-Jan-15 Document Number: 83492 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VOM3052, VOM3053 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT OUTPUT Peak off-state voltage V 600 V DRM RMS on-state current I 70 mA T(RMS) Peak non-repetitive surge current PW = 100 ms, 120 pps I 1A TSM Power dissipation P 200 mW diss COUPLER Isolation test voltage t = 1 min V 3750 V ISO RMS Power dissipation P 300 mW tot Storage temperature range T -55 to +150 C stg Ambient temperature range T -40 to +100 C amb Soldering temperature T 260 C sld Notes Stresses in excess of the Absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to Absolute Maximum Ratings for extended periods of the time can adversely affect reliability. 100 80 60 40 20 0 - 40 - 20 0 20 40 60 80 100 120 T - Temperature (C) amb Fig. 1 - Recommended Operating Condition ELECTRICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage I = 10 mA V 1.2 1.5 V F F Reverse current V = 6 V I 10 A R R Input capacitance V = 0 V, f = 1 MHz C 25 pF F I OUTPUT Off-state current V = V I 100 nA D DRM DRM On-state voltage I = 100 mA V 3V T TM Critical rate of rise off-state voltage V = 0.67 V , T = 25 C dV/dt 1500 V/s D DRM J cr Critical rate of rise of voltage at dV/dt 0.13 V/s crq current commutation COUPLER VOM3053 I 5mA LED trigger current, FT V = 3 V D current required to latch output VOM3052 I 10 mA FT Capacitance (input - output) f = 1 MHz, V = 0 V C 0.8 pF IO IO Peak off-state voltage I = 100 A V 600 V C DRM Holding current I 0.3 mA hold Note Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Rev. 1.5, 27-Jan-15 Document Number: 83492 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 I - Load Current (mA) L