VO2223B www.vishay.com Vishay Semiconductors Optocoupler, Power Phototriac FEATURES Fully integrated power TRIAC 8 1 Maximum trigger current (I ): 10 mA FT 2 Isolation test voltage 5300 V RMS Peak off-state voltage 600 V 6 3 Load current 1 A RMS 5 4 dV/dt of 600 V/s 21081-4 V DIP-8 package DE 2317123171 Pure tin leads Material categorization: for definitions of compliance please see www.vishay.com/doc 99912 DESCRIPTION The VO2223B is an optically coupled phototriac driving an APPLICATIONS integrated power TRIAC in a DIP-8 package. Featuring Air conditioners galvanic and electrical noise isolation, the VO2223B is able to directly drive medium AC loads with a low voltage input Microwave ovens signal. The high blocking voltage of 600 V permits control of Washing machines off-line voltages up to 230 V and is sufficient for as muc h AC Refrigerators as 380 V . AC Fan heaters Inductive heating cooker Water heaters Industrial equipments AGENCY APPROVALS UL / cUL 1577 DIN EN 60747-5-5 (VDE 0884-5), available with option 1 ORDERING INFORMATION DIP-8 Option 7 V O 22 23 B - X 0 0 PART NUMBER PACKAGE OPTION 7.62 mm > 0.7 mm AGENCY CERTIFIED / PACKAGE TRIGGER, CURRENT I (mA) FT UL, cUL 10 DIP-8 VO2223B SMD-8, option 7 VO2223B-X007T UL, cUL, VDE (option 1) 10 DIP-8 VO2223B-X001 SMD-8, option 7 VO2223B-X017T Rev. 1.2, 18-Mar-2021 Document Number: 83312 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 VO2223B www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Forward current I 50 mA F Reverse voltage V 5V R Input power dissipation P 70 mW diss OUTPUT Repetitive peak off-state voltage Sine wave, 50 Hz to 60 Hz, gate open V 600 V DRM RMS on-state current I 1A T(RMS) Non repetitive surge peak on-state current 50 Hz, peak I 10 A TSM COUPLER (1) Total power dissipation P 1.2 W diss Ambient temperature range T -40 to +85 C amb Storage temperature range T -40 to +125 C stg Soldering temperature t 10 s max. T 260 C sld Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Total power dissipation value is based on 2S2P PCB ABSOLUTE MAXIMUM RATING CURVES 80 1.2 1.0 60 0.8 40 0.6 0.4 20 0.2 0 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 21296 T - Ambient Temperature (C) 21354 T - Ambient Temperature (C) amb amb Fig. 1 - Input Power Dissipation vs. Ambient Temperature Fig. 2 - RMS On-State Current vs. Ambient Temperature Note The RMS on-state current was calculated out under a given operating conditions and only for reference: input power: Q = 0.015 W, (4-layer) = 30 C/W E BA Rev. 1.2, 18-Mar-2021 Document Number: 83312 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 P - Input Power Disspation (mW) diss I - RMS On-State Current (A) T(RMS)