6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors High Speed Optocoupler, Single and Dual, 10 MBd FEATURES Single channel Choice of CMR performance of 15 kV/s, NC 1 8 V 5 kV/s, and 1000 V/s CC 2 7 High speed: 10 MBd typical A V E +5 V CMOS compatibility 3 6 C V O Pure tin leads NC 4 5 GND Guaranteed AC and DC performance over 6N137, VO2601, VO2611 temperature Meets IEC 60068-2-42 (SO ) and IEC 60068-2-43 (H S) 2 2 Dual channel requirements A1 1 8 V CC Low input current capability of 5 mA 2 7 C1 V Material categorization: for definitions of compliance O1 please see www.vishay.com/doc 99912 C2 3 6 V O2 4 5 A2 APPLICATIONS GND Microprocessor system interface VO2630, VO2631, VO4661 PLC, ATE input / output isolation Computer peripheral interface Digital fieldbus isolation: CC-link, DeviceNet, profibus, SDS DESCRIPTION High speed A/D and D/A conversion The 6N137, VO2601, and VO2611 are single channel AC plasma display panel level shifting 10 MBd optocouplers utilizing a high efficient input LED Multiplexed data transmission coupled with an integrated optical photodiode IC detector. Digital control power supply The detector has an open drain NMOS-transistor output, Ground loop elimination, noise isolation providing less leakage compared to an open collector Schottky clamped transistor output. The VO2630, VO2631, AGENCY APPROVALS and VO4661 are dual channel 10 MBd optocouplers. For the UL1577 single channel type, an enable function on pin 7 allows the detector to be strobed. The internal shield provides a cUL guaranteed common mode transient immunity of 5 kV/s for DIN EN 60747-5-5 (VDE 0884-5) available with option 1 the VO2601 and VO2631 and 15 kV/s for the VO2611 and BS EN 60950-1 VO4661. The use of a 0.1 F bypass capacitor connected CQC GB8898-2011, GB4943.1-2011 between pin 5 and 8 is recommended. ORDERING INFORMATION Option 6 DIP-8 V O 26 01 - X 0 T 10.16 mm 7.62 mm PART NUMBER PACKAGE OPTION TAPE Option 7 Option 9 AND REEL > 0.1 mm > 0.7 mm CHANNELS 1 CHANNELS 2 AGENCY CERTIFIED/PACKAGE CMR (V/s) CMR (V/s) BSI, UL, cUL 1000 5000 15 000 1000 5000 15 000 DIP-8 6N137 VO2601 VO2611 VO2630 VO2631 VO4661 DIP-8, 400 mil (option 6) 6N137-X006 VO2601-X006 VO2611-X006 VO2630-X006 VO2631-X006 VO4661-X006 SMD-8 (option 7) 6N137-X007T VO2601-X007T VO2611-X007T VO2630-X007T VO2631-X007T VO4661-X007T SMD-8 (option 9) 6N137-X009T - - VO2630-X009T - - VDE, BSI, UL, cUL 1000 5000 15 000 1000 5000 15 000 DIP-8, 400 mil (option 6) - VO2601-X016 VO2611-X016 - VO2631-X016 - SMD-8 (option 7) - VO2601-X017T VO2611-X017T - VO2631-X017T - Rev. 2.0, 27-Sep-16 Document Number: 84732 1 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 6N137, VO2601, VO2611, VO2630, VO2631, VO4661 www.vishay.com Vishay Semiconductors TRUTH TABLE (positive logic) LED ENABLE OUTPUT On H L Off H H On L H Off L H On NC L Off NC H ABSOLUTE MAXIMUM RATINGS (T = 25 C, unless otherwise specified) amb PARAMETER CONDITIONS SYMBOL VALUE UNIT INPUT Average forward current (single channel) I 20 mA F Average forward current I 15 mA F (per channel for dual channel) Reverse input voltage V 5V R Enable input voltage V V + 0.5 V V E CC Enable input current I 5mA E Surge current t = 100 s I 200 mA FSM Output power dissipation P 35 mW diss (single channel) Output power dissipation (per channel for P 25 mW diss dual channel) OUTPUT Supply voltage 1 min maximum V 7V CC Output current I 50 mA O Output voltage V 7V O Output power dissipation (single channel) P 85 mW diss Output power dissipation (per channel for P 60 mW diss dual channel) COUPLER Storage temperature T -55 to +150 C stg Operating temperature T -40 to +100 C amb Lead solder temperature for 10 s 260 C Solder reflow temperature 260 C Note Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. Rev. 2.0, 27-Sep-16 Document Number: 84732 2 For technical questions, contact: optocoupleranswers vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000