Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Timer/Time lag relay TI484801 Excitation: 24 VDC Timer/Time lag relay in 48 mm x 48 mm format - 30 mA( 24 VAC power supply) Universal AC/DC power supply - 40 mA(24 VDC power supply) 5 different operation modes - 60 mA(110 bis 230 VAC power supply). 2-line LED display Easy programming by front keys or software Supply: Two relay outputs 24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz 2 W Data security: Password-protected access to setpoint, alarm values and parameters. Programming: Programming and operation is menu-guided via the front keys. With the programming kit, the controller can also be programmed by a Windows - software. The memory card has an internal battery. Thus, the programming of the devices is possible without the supply (up to 1000 programming with a battery). Wiring plan: TI484801 The compact timer TI484801 is settable in 5 different modes: Timer- ON, Timer-OFF, Pause-Work, Oscillator, PWM (time-proportioned output), all options with independent setting of ON-OFF times. 3 digital inputs are available (NPN/PNP/Potential free contact) for external TI484801 commands like Start, Stop, Reset one input is also analogic in order to allow the modification of working times by external potentiometer. Due to the 5 different time bases (hundredths, tenths, seconds, Protection class: IP65 from the front (with rubber sealing), back plane minutes, hours), the timer is usable for a lot of different applications. In IP20. addition to an excellent cost effectiveness and high quality, the timer offers a rugged, compact housing and a brilliant display. Housing: Black and robust plastic case. Display: 2-line LED-Display Dimensions: W 48 mm x H 48mm x D 107 mm. Panel cut out 46 mm x Upper line: Process value, 4-digit, green with 10.2 mm digits 46 mm. Lower line: Setpoint, 4-digit, red with 7,6 mm digits Connection: Via screw terminal. Indicators: Two red indicators for status relay outputs and a yellow indicator for serial communication. Ambient conditions: Operating temperature: 0 C to +40 C relative C1,C 2: ON, when output active humidity 35 % to 95 %. rF, non condensing. R: ON when serial communication is active Weight: 350 gramms. Buttons: 4 front keys for programming and setting up the setpoints. Scope of delivery: Controller, mounting clamp, sealing, manual. Inputs: Three digital inputs can be configured as PNP, NPN or TTL.Programmable thresholds for activation as a high / low active active / rising edge or level triggered. Input NPN PNP TTL signal Logic level >5,7 V (I1, I2) High < 4,7 V >2,5 V >12,4 v (I3) < 4,7 V (I1, I2) Low > 5,7 V < 2,0 V < 10,2 V (I3) Input I3 can also be used for connection of a potentiometer (0 to 5/10 kOhm) for setting the nominal value (resolution: 1,000 steps). Function of inputs: Start, stop, hold, reset, wait, setpoint input (I3). Order codes Time bases: 5 different programmable time bases (hundredths, tenths, seconds, minutes, hours). Type Order-No. Relay output: 2 closing contacts (N.O.) with 8A 250 VAC. Timer, 24 to 230 VAC/VDC TI484801 Programmable as N.O. or N.C... Accessories Programming module with USB cable SFUR0KIT Software download under: X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wachendorff manufacturer: Other Similar products are found below : Wachendorff