WDG 58H-12-3600-ABN-R24-K3 Wachendorff

Encoder WDG 58H www.wachendorff-automation.com/wdg58h Wachendorff Automation ... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum permissible loads 48-hour express production Made in Germany Worldwide distributor network WDG 58H Errors and modifications reserved. Wachendorff Automation GmbH & Co. KG 2013-10-01 -1-Encoder WDG 58H Rugged industrial standard encoder Up to 25000 PPR by use of high grad electronics Thru-Bore High protection class IP65, with oil seal Maximum mechanical and electrical safety High noise immunity Full connection protection with 10 VDC up to 30 VDC With light reserve warning Optional: -40 C up to +80 C www.wachendorff-automation.com/wdg58h Resolution Shaft length L: 44.5 mm, L: 1.75 Max. pulses per revolution up to 25000 PPR Max. Permissible shaft 80 N, 8.15 kp PPR loading radial Max. Permissible shaft 60 N, 6.12 kp loading axial Mechanical Data Housing Shaft 14 mm Flange hollow shaft (through-bored) Shaft length L: 44.5 mm Flange material aluminium Max. Permissible shaft 80 N Housing cap aluminium, powder coated loading radial Torque supports incl. 1 torque support WDGDS10001 Max. Permissible shaft 60 N - 1. Spring plate axial: 0.8 mm, radial: 0.2 mm loading axial compensation - Max. operating speed 6000 rpm up to max. protection rating Bearings +60 C Bearings type 2 precision ball bearings - 2. Cylinder pin 4 mm needs accessories WDGDS10005 Nominale service life 1 x 10 9 revs. at 100 % rated shaft - Compensation axial: 0.5 mm, radial: 1.5 mm, Max. load operating speed: 3000 rpm 1 x 10 10 revs. at 40 % rated shaft Housing 58 mm load 1 x 10 11 revs. at 20 % rated shaft load Shaft(s) Max. operating speed 6000 rpm Shaft material stainless steel Starting torque approx. 2.2 Ncm at ambient Machinery Directive: basic data safety integrity level temperature MTTF 200 a d Fixing permanently attached clambing ring Mission time (TM) 25 a Nominale service life (L10h) 1 x 10 11 revs. at 20 % rated shaft Shaft 8 mm load and 6000 rpm Shaft length L: 44.5 mm Diagnostic coverage (DC) 0 % Max. Permissible shaft 80 N loading radial Electrical Data Max. Permissible shaft 60 N loading axial Power supply/Current 4,75 VDC up to 5,5 VDC: max. 100 consumption mA 5 VDC up to 30 VDC: max. 70 mA Shaft 10 mm 10 VDC up to 30 VDC: max. 100 mA Shaft length L: 44.5 mm Output circuit TTL TTL, RS422 compatible, inv. Max. Permissible shaft 80 N HTL loading radial HTL, inv. Max. Permissible shaft 60 N 1 Vpp sin/cos loading axial Pulse frequency TTL 5000 ppr: max. 200 kHz HTL 5000 ppr: max. 200 kHz TTL more than 5000 ppr: max. 2 MHz Shaft 12 mm HTL more than 5000 ppr: max. 600 Shaft length L: 44.5 mm kHz 1 Vpp sin/cos: max. 100 kHz Max. Permissible shaft 80 N loading radial Channels AB ABN Max. Permissible shaft 60 N and inverted signals loading axial Load max. 40 mA / channel 1 Vpp sin/cos: min. 120 Ohm Shaft 12.7 mm, 1/2 WDG 58H Errors and modifications reserved. Wachendorff Automation GmbH & Co. KG 2013-10-01 -2-