Encoder WDG 63Q www.wachendorff-automation.com/wdg63q Wachendorff Automation ... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum permissible loads 48-hour express production Made in Germany Worldwide distributor network WDG 63Q Errors and modifications reserved. Wachendorff Automation GmbH & Co. KG 2013-10-01 -1-Encoder WDG 63Q 3/8 stainless steel shaft Up to 25000 PPR by use of high grad electronics Protection to IP67, shaft sealed to IP65 Full connection protection with 10 VDC up to 30 VDC With light reserve warning Optional: -40 C up to +80 C -40 F +176 F , Protection to IP67 all around www.wachendorff-automation.com/wdg63q Resolution Output circuit TTL TTL, RS422 compatible, inv. Max. pulses per revolution up to 25000 PPR HTL PPR HTL, inv. 1 Vpp sin/cos Mechanical Data Pulse frequency TTL 5000 ppr: max. 200 kHz HTL 5000 ppr: max. 200 kHz Housing TTL more than 5000 ppr: max. 2 MHz Flange clamping flange HTL more than 5000 ppr: max. 600 kHz Flange material aluminium 1 Vpp sin/cos: max. 100 kHz Housing cap aluminium, powder coated Channels AB Housing 63.5 mm, 2.5 in ABN and inverted signals 1 Vpp Sin/Cos Shaft(s) Load max. 40 mA / channel Shaft material stainless steel 1 Vpp sin/cos: min. 120 Ohm Starting torque approx. 1 Ncm at ambient Circuit protection circuit type F24, G24, H24, I24, P24, temperature, approx. 1.416 in-ozf at R24 only ambient temperature Accuracy Shaft 9.525 mm, 3/8 Phase offset 90 max. 7.5 % of the pulse length Shaft length L: 22.2 mm, L: 0.874 pulse-/pause-ratio 50 % max. 7 % Max. Permissible shaft 220 N, 22.434 kp loading radial General Data Max. Permissible shaft 120 N, 12.237 kp loading axial Weight approx. 300 g, approx. 9.877 oz Connections cable or connector outlet Bearings Protection rating (EN 60529) IP67, shaft sealed to IP65 Bearings type 2 precision ball bearings Operating temperature -20 C up to +80 C, -4 F up to +176 F Nominale service life 1 x 10 9 revs. at 100 % rated shaft 1 Vpp: -10 C up to +70 C, -14 F up load to +158 F 1 x 10 10 revs. at 40 % rated shaft load Storage temperature -30 C up to +80 C, -22 F up to 1 x 10 11 revs. at 20 % rated shaft +176 F load Max. operating speed 8000 rpm More Information General technical data Machinery Directive: basic data safety integrity level