Wachendorff Prozesstechnik GmbH & Co. KG Industriestrasse 7 D-65366 Geisenheim Tel.: +49 (0) 67 22 / 99 65 - 20 Fax: +49 (0) 67 22 / 99 65 - 78 www.wachendorff.de Counter/Preset Counter ZD327401 Excitation: 24 VDC Conter/Preset Counter in 32 mm x 74 mm format - 30 mA( 24 VAC power supply) Universal AC/DC power supply - 40 mA(24 VDC power supply) Input frequency up to 100 kHz - 60 mA(110 bis 230 VAC power supply). 2-line LED display Easy programming by front keys or software Supply: Two relay outputs 24VAC/DC to 230 VAC/DC +/-15 %, 50/60Hz 2 W Data security: Password-protected access to setpoint, alarm values and parameters. Programming: Programming and operation is menu-guided via the front keys. With the programming kit, the controller can also be programmed by a Windows - software. The memory card has an internal battery. Thus, the programming of the devices is possible without the supply (up to 1000 programming with a battery). Wiring plan: ZD327401 The compact small counter ZD327401 can be set in two different modes: Single or Double counter, all with independent setting. 3 universal digital inputs are available (NPN/PNP/contact) can be used for bi-directional encoders reading, UP/DOWN counter function, LOCK/HOLD to lock or hold current visualization. One input is also analogue in order to allow setpoint modification by an external potentiometer. Due to the two different modes and the scaling features, the counter is usable for a lot of different applications. In addition to an excellent cost ZD327401 effectiveness and high quality, the counter offers a rugged, compact housing and a brilliant display. Protection class: IP65 from the front (with rubber sealing), back plane Display: 2-line LED-Display IP20. Upper line: Counting value, 4-digit, green with 10.2 mm digits Lower line: Setpoint, 4-digit, red with 7,6 mm digits Housing: Black and robust plastic case, PC ABS UL94V0 self- extinguishing. Indicators: Two red indicators for status relays outputs and a yellow indicator for serial communication. Dimensions: W 77 mm x H 35 mm x D 53 mm. Panel cut out 28,5 mm x 1, 2: ON, when output active 70,5 mm. R: ON when serial communication is active Connection: Via screw terminal. Buttons: 4 front keys for programming and setting up the setpoints. Ambient conditions: Operating temperature: 0 C to +40 C relative Inputs: Three digital inputs can be configured as PNP, NPN or humidity 35 % to 95 %. rF, non condensing. TTL.Programmable thresholds for activation as a high / low active active / rising edge or level triggered. Weight: 100 gramms. Input Scope of delivery: Controller, mounting clamp, sealing, manual. NPN PNP TTL signal Logic level >5,7 V (I1, I2) High < 4,7 V >2,5 V >12,4 v (I3) < 4,7 V (I1, I2) Low > 5,7 V < 2,0 V < 10,2 V (I3) Input I3 can also be used for connection of a potentiometer (0 to 5/10 kOhm) for setting the nominal value (resolution: 1,000 steps). Function of inputs: Counting direction, stop, hold, wait, setpoint input Order codes (I3). Type Order-No. Input frequency: Min 1 Hz to max. 100 kHz Counter, 230 VAC/VDC ZD327401 Frequency display: It is possible to programm the counter as a frequency meter. Accessories Programming module with USB cable SFUR0KIT Relay output: 1 change over relay with 5 A 250 VAC and 1 closing Software download under: contact with 5A 250 VAC.. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for wachendorff manufacturer: Other Similar products are found below : Wachendorff