End Stop for DIN 35 Rail 14 19 End stop for DIN 35 rail, End stop for DIN 35 rail, End stop width 6 mm / 0.236 in End stop width 10 mm / 0.394 in < 45 mm /1.77in > < 45 mm /1.77in > Item Pack.-unit Item Pack.-unit No. pcs No. pcs End stop, for DIN 35 rail End stop, for DIN 35 rail 6 mm /0.236 in wide 10 mm /0.394 in wide 249-116 100 (4 x 25) 249-117 50 (2 x 25) Application notes Fit and forget Assembling the new WAGO screwless end stop is as simple and quick as snapping a WAGO rail-mounted terminal block onto the rail. Without any tools This way rail-mounted terminal blocks are safely secured, at low cost, against any movement on all carrier rails DIN 35 acc. to DIN EN 50022 (35 x 7.5 mm 35 x 15 mm). Entirely without screws The secret of the excellent tight fit lies in the Snap on . . . two small clamping plates which keep the end stop in position, even if the rails are mounted vertically. Simply snap on and forget In addition, costs are considerably reduced when using large numbers of end stops. 14 A further advantage is that three marker receptacles for all WAGO marker systems for rail-mounted terminal blocks and a snap-in hole for WAGO adjustable height group marker carriers offer individual marking possibilities. . . . thats it 28 mm / < > 1.10 in 28 mm / < > 1.10 in