285-150 Wago

2-Conductor Ground (Earth) 2-Conductor Through Terminal Blocks Voltage Tap Terminal Blocks 2 35 mm < 86 mm /3.39 in > < 86 mm /3.39 in > Item no. grey 285-135 blue 285-134 green-yellow 285-137 grey 285-427 2 2 2 Rated cross section 635 mm AWG 82 635 mm AWG 82 0.2 6 mm AWG 2410 Rated voltage 1000 V / 8 kV / 3 600 V 800 V / 8 kV / 3 Rated current 125 A 32 A Stripped length 25 mm 0.98 in 25 mm 0.98 in 12 13 mm 0.49 in Adjacent jumper grey 285-435 grey 285-435 Strain relief plate 769-410 Screwdriver 210-621 210-621 Test plug 2 mm / 0.079 in 210-136 Protective warning marker yellow 285-420 yellow 285-420 Test plug 2.3 mm / 0.091 in 210-137 Finger guard cover yellow 285-421 yellow 285-421 Test plug adapter 283-404 283-404 Test plug not offered by WAGO not offered by WAGO 2-Conductor Ground (Earth) 2-Conductor Through Terminal Blocks Voltage Tap Terminal Blocks 2 50 mm 2 2 95 mm < 94 mm /3.70 in > < 94 mm /3.70 in > 95 mm Item no. grey 285-150 blue 285-154 green-yellow 285-157 grey 285-447 2 2 Rated cross section 1050 (70f-s) mm AWG 82 / 0 1050 (70f-s) mm AWG 82 / 0 2 x 0.2 6 mm AWG 2410 Rated voltage 1000 V / 8 kV / 3 600 V 1000 V / 8 kV / 3 Rated current 150 A A 22 Stripped length 30 mm 1.18 in 30 mm 1.18 in 12 13 mm 0.49 in 50 mm 50 mm Adjacent jumper grey 285-450 grey 285-450 Hex wrench 285-172 285-172 Protective warning marker yellow 285-440 yellow 285-440 2 2 Finger guard cover yellow 285-441 yellow 285-441 35 mm 35 mm Test plug not offered by WAGO not offered by WAGO 2 2-Conductor Ground (Earth) 2-Conductor Through Terminal Blocks 25 95 mm AWG 4 4/0 Voltage Tap Terminal Blocks 2 The Full Range of High Current Terminal Blocks 95 mm The Range of Rail Mounted Terminal Blocks for Wire Sizes Ranging from < 107 mm /4.21 in > < 107 mm /4.21 in > 2 2 WAGO Kontakttechnik GmbH & Co. KG Item no. 6 mm / AWG 8 to 95 mm /AWG 4/0 grey 285-195 blue 285-194 green-yellow 285-197 grey 285-407 2 2 2 P.O. Box 28 80 32385 Minden Rated cross section 2595 mm AWG 44 / 0 2595 mm AWG 44 / 0 0.2 10/16 mm AWG 246 Hansastrae 27 32423 Minden Rated voltage 1000 V / 8 kV / 3 600 V 1000 V / 8 kV / 3 Fax ++49/5 71/8 87 - 169 Rated current 232 A A info wago.com Stripped length 35 mm 1.38 in 35 mm 1.38 in 16 17 mm 0.65 in www.wago.com Adjacent jumper grey 285-495 grey 285-495 Hex wrench 285-172 285-172 Protective warning marker yellow 285-170 yellow 285-170 Finger guard cover yellow 285-169 yellow 285-169 Test plug not offered by WAGO not offered by WAGO 25 mm /0.98 in > < 20 mm /0.78 in > < 16 mm /0.63 in > < < 63 mm / > < 101 mm /3.98 in > < 87 mm /3.43 in > 2.48 in 25 mm /0.98 in > < 20 mm /0.78 in > < 16 mm /0.63 in > < < 63 mm / > < 101 mm /3.98 in > < 87 mm /3.43 in > 2.48 in 51191413 0888-0174/0001-3601 POWER CLAMP 08/07 JA 70821 Printed in Germany Technical changes reserved 4 045454 5580312 Connecting Conductors up to 95 mm /AWG 4/0 Commoning Commoning with adjacent jumper. Insertion of jumper with a Turn of the Hand above the conductor entry hole, without tools. Testing with test plug The Range of Rail Mounted Terminal Blocks for Wire Sizes Ranging Rated cross section is still 4 mm 2 2 2 50 mm /AWG 2/0 and from 6 mm / AWG 8 to 95 mm / AWG 4/0 2 95 mm /AWG 4/0. Commoning Testing using test plug adapters (accessory) for 4 mm plugs. Commoning adjacent terminal blocks using Move the marking strip laterally to remove centrally positioned adjacent jumpers. the jumper. Voltage tap The voltage tap is inserted into the jumper contact slot. It can be fitted 2 with a strain relief plate and provides test option for 2 mm/2.3 mm test Touch protection cover 95 mm plugs. 1000 V AWG 4 4/0 Marking 232 A 2 Voltage tap 50 mm Covers provide touchproof safety by 1000 V AWG 82/0 closing unused clamping units and jumper contact slots (detach the cover 150 A In addition to the WSB marking system, of the jumper contact slot from the touch custom marking strips can also be used. protection cover of the clamping unit) Reliable and simple tap directly onto the power supply. Insert 2 the unwired tap before ope- ning the pressure spring. 35 mm 1000 V AWG 8 2 125 A 2 2 Wire connection 35 mm Protective warning marker Safety notice Wire connection 50 / 95 mm Counter-clockwise rotation using a Introduce stripped wire into the . . . A small counter-clockwise rotation Protective warning marker may indicate: Attention Health hazard Counter-clockwise rotation using a hex Introduce stripped wire into the . . . A small counter-clockwise rotation screwdriver (blade width 5.5 mm). Hold clamping unit up to the stop and hold releases the latch . Once the screw- Attention Voltage may be present despite Keep your fingers out of the conductor wrench. Hold clamp in open position clamping unit up to the stop and hold releases the latch . Once the hex clamp in open position using the latch. it in position . . . driver has been removed the conduc- main circuit being switched off entry hole using the latch. it in position . . . wrench has been removed the con- tor is clamped safely. ductor is clamped safely.