X-On Electronics has gained recognition as a prominent supplier of 173-7-520P Thermal Interface Products across the USA, India, Europe, Australia, and various other global locations. 173-7-520P Thermal Interface Products are a product manufactured by Wakefield. We provide cost-effective solutions for Thermal Interface Products, ensuring timely deliveries around the world.

173-7-520P Wakefield

173-7-520P electronic component of Wakefield
Product Image X-ON
Product Image X-ON
Product Image X-ON

Images are for reference only
See Product Specifications
Part No.173-7-520P
Manufacturer: Wakefield
Category: Thermal Interface Products
Description: Thrml Mgmt Access Thermal Insulator Gray 0.33C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Datasheet: 173-7-520P Datasheet (PDF)
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges



Price (USD)
10: USD 3.3731 ea
Line Total: USD 33.73 
Availability - 566
Ship by Tue. 10 Dec to Mon. 16 Dec
MOQ: 10  Multiples: 1
Pack Size: 1
Availability Price Quantity
566
Ship by Tue. 10 Dec to Mon. 16 Dec
MOQ : 10
Multiples : 1
10 : USD 3.3731
1000 : USD 0.945
3000 : USD 0.7271
4000 : USD 0.5526

549
Ship by Tue. 10 Dec to Mon. 16 Dec
MOQ : 20
Multiples : 1
20 : USD 4.5604
1000 : USD 1.2776
3000 : USD 0.9831
4000 : USD 0.7471

   
Manufacturer
Product Category
Category
LoadingGif
 
Notes:- Show Stocked Products With Similar Attributes.

We are delighted to provide the 173-7-520P from our Thermal Interface Products category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the 173-7-520P and other electronic components in the Thermal Interface Products category and beyond.

Image Part-Description
Stock Image 173-9-1212P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 58
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-220P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 3610
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-240P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-220, 0.009", Grey, No Adhesive
Stock : 460
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-250P
Thrml Mgmt Access Thermal Insulator Gray 0.5°C/W 3X10e-3Cal/cm.sec.°C 1X10e15Ohm.cm
Stock : 221
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-290P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 2937
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-320P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 2402
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-7-710P
Thrml Mgmt Access Thermal Insulator Gray 0.33C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-210P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-220, 0.009", Grey, No Adhesive
Stock : 3238
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-230P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-220, 0.009", Grey, No Adhesive
Stock : 1049
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-310P
HEAT DISIPATION-COMPOUND & ADHESIVE
Stock : 1175
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Image Part-Description
Stock Image 173-7-710P
Thrml Mgmt Access Thermal Insulator Gray 0.33C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 2
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-210P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-220, 0.009", Grey, No Adhesive
Stock : 3238
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-230P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-220, 0.009", Grey, No Adhesive
Stock : 1049
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-330P
Thermal Interface Products DeltaPads Thermally Conductive Insulators for TO-3, 0.009", Grey, No Adhesive
Stock : 1133
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-340P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 838
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 173-9-66P
Thrml Mgmt Access Thermal Insulator Gray 0.5C/W 3X10e-3Cal/cm.sec.C 1X10e15Ohm.cm
Stock : 1
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 174-9-240P
Thrml Mgmt Access Thermal Insulator Tan 0.25C/W 1X10e-2Cal/cm.sec.C 1X10e19Ohm.cm
Stock : 1162
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 174-9-250P
Thrml Mgmt Access Thermal Insulator Tan 0.25C/W 1X10e-2Cal/cm.sec.C 1X10e19Ohm.cm
Stock : 91
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 174-9-410P
Thrml Mgmt Access Thermal Insulator Tan 0.25C/W 1X10e-2Cal/cm.sec.C 1X10e19Ohm.cm
Stock : 476
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.
Stock Image 174-9-520P
Thrml Mgmt Access Thermal Insulator Tan 0.25C/W 1X10e-2Cal/cm.sec.C 1X10e19Ohm.cm
Stock : 1000
This product is classified as Large/Heavy, additional shipping charges may apply. A customer service representative may contact you after ordering to confirm exact shipping charges.

WTS001 p50-68 6/14/07 10:46 AM Page 64 Accessory Products THERMAL COMPOUNDS, ADHESIVES AND INTERFACE MATERIALS The 120 Series Silicone Oil-Based Thermal Joint Compound fills the minute air gap between mating surfaces with 120 SERIES a grease-like material containing zinc oxide in a silicone oil carrier. It possesses an excellent thermal resistance of only 0.05C/W for a 0.001 in. film with an area of one square inch. There is no measurable increase in case tem- perature of a mounted semiconductor on a heat sink after the 6-month stabilization period (Time versus Thermal Resistivity graph below). TYPICAL VALUES FOR THERMAL RESISTANCE, 120 SERIES - THERMAL JOINT COMPOUND CASE TO SINK ( ) WHEN THERMAL JOINT cs Characteristic Description COMPOUNDS ARE USED 14 Typical Volume Resistivity 5 X 10 ohm-cm Mounting Torque Thermal Dielectric Strength 225 volts/mil in inch pounds Resistance Case Style Characteristics (NM) (C/W) Specific Gravity 2.1 min. T0-3 8 (0.9) 0.09 Thermal Conductivity 36C 0.735 W/(m)(K) 2 TO-66 9 (0.9) 0.14 5.1(Btu) (in.)/(hr)(ft )(F) TO-220 8 (0.9) 0.50 Thermal Resistivity (P) 56 (C)(in.)/watt 0.19 (4.8) stud x 0.44 (11.2) hex 15 (1.7) 0.16 Bleed, % after 24 hrs 200C 0.5 0.25 (6.4) stud x 0.69 (17.5) hex 30 (3.39) 0.10 Evaporation, % after 24 hrs 200C 0.5 0.38 (9.7) stud x 1.06 (26.9) hex 75 (8.47) 0.07 Color opaque white 0.50 (12.7) stud x 1.06 (26.9) hex 125 (14.12) 0.07 Shelf life 5 years 0.75 (19.1) stud x 1.25 (31.8) hex 600 (67.79) 0.052 Operating Temperature Range (C) -40/+200 120 SERIES - ORDER GUIDE Series - Container Size P/N 120-SA 4 gram plastic pak 120-2 2 oz (0.06 kg) jar 120-5 5 oz (0.14 kg) tube 120-8 8 oz (0.23 kg) jar 120-80 5 lb (2.27 kg) can 120-320 20 lb (9.08 kg) can HIGH PERFORMANCE THERMAL COMPOUND 122 Series Thermal Joint Compound is a stable, silicone based, thixotropic paste developed to provide premium 122 SERIES performance at an affordable price. It is formulated to significantly reduce contact thermal resistance where power densities are concentrated in devices such as flip chip, reduced die size, and overclock microprocessors. When applied as a thin film between a Wakefield heat sink and device it possesses superior thermal conductivity compared to traditional grease. It is compatible with automated or manual dispensing methods and is fully RoHS compliant. 122 SERIES - ORDER GUIDE 122 SERIES THERMAL JOINT COMPOUND Series - Container Size Typical Characteristics Description P/N Appearance Smooth Gray paste 122-10CC 10cc syringe Thermal Conductivity 2.5 W / m K, 122-2 2 oz (0.06 kg) jar 2 0 17.3 (Btu) (in.)/(hr) (ft ) ( F) 122-30CC 30cc syringe Thermal Resistance 0.02 C in 2 / W Bleed 0.015 wt%, 24 hrs at 200C Evaporation 0.150 wt%, 24 hrs at 200C 10 Volume Resistivity 1.4 x 10 ohm-cm Dielectric Strength 225 volts/mil Specific Gravity 2.23 (gm/cc) at 25C Operating Range -40C to 205C Shelf Life 5 years 64WTS001 p50-68 6/14/07 10:46 AM Page 65 Accessory Products THERMAL COMPOUNDS, ADHESIVES AND INTERFACE MATERIALS The 126 Series is a nontoxic, synthetic, ester-based (nonsilicone) Thermal Joint Compound with metal oxide 126 SERIES fillers designed to enhance thermal performance characteristics of plastic and metal package devices exceeding that of silicone-based compounds. Solved are problems associated with contamination of wave solder baths and migration of silicone-based products. Shelf life: 5 years. 126 SERIES THERMAL JOINT COMPOUND 126 SERIES - ORDER GUIDE Characteristics Description Series - Container Size P/N Appearance Smooth, white homogeneous paste 126-2 2 oz (0.6 kg) jar Solids Content, wt % 65% min 0 2 126-4 4 oz (0.11 kg) tube Thermal Conductivity at 36C .69 W / m K, 4.8 (Btu)(in.)/(hr) (ft ) (F) 126-4S 4 oz (0.11 kg) syringe Interface Thermal Resistance 0.043C/W TO-3 at 0.0008 thick film 126-5LB 5 lb (2.27 kg) can Bleed, 24 hrs at 200C, wt% 0.09% max Evaporation, 24 hrs at 200C, wt% 0.6 max 12 Volume Resistivity 2.3 x 10 ohms-cm Dielectric Strength 200 volts/mil Specific Gravity 60F 2.93 (gm/cc) Penetration 280 to 320 Operating Range -40C to 200C DeltaBond 152 adhesive is ideal for general cementing thermally bonding semiconductors and components to DeltaBond 152 chassis or heat sinks, while electrically isolating one from the other fabricating heat sinks or thermal links and for all permanent bonding of assemblies which require high thermally conductive interfaces. It produces a rigid, high strength bond to most materials when cured. DeltaBond 152 is available in bi-packs, kits, and quarts. Order one bottle of hardener A-4 or B-4 per one quart of DeltaBond 152 separately. Shelf life: 152KA 1 year, all others 2 years. DELTABOND152 DELTABOND152 Characteristics Hardener Type Mixing Proportions and Working Properties Typical Properties Fully Cured A4 B4 Characteristics A4 B4 Thermal conductivity - Parts of hardener per 100 parts of resin by weight 7.5 3.5 W/(m) (K) 0.836 0.908 2 (Btu) (in.)/(hr) (ft ) (F) 5.8 6.3 *Working Time - at 77F 45 min 30 min Thermal resistivity - (C) (in.)watt 47 42 Initial cure time 77F 8 hrs 6 hrs Bond shear strength 77F 2,900 2,300 150F 45 min 30 min 1 in. overlap - psi 125F 2,200 2,000 etched aluminum to 250F 20 min 15 minn etched aluminum 212F 400 800 Post-cure time at a temp in F 4 hrs 200F 4 hrs 200F Heat distortion point - F 130 225 Alternate room temp. aging 4 days 4 days Minimum dielectric strength, time at 77F v/mil, 0.125 in. sample 400 400 Working consistency (77F) viscous liquid paste Max operation Continuous 65 150 temp - C Intermittent 100 190 Working viscosity (77F) cps 25,000 DELTABOND152 Ordering Guide - Resin and Hardener Model Resin Hardener Number Part No. Container Part Number 152-1A Bi-Pack (1 oz) Included in PIN 152-1 A (A-4) Type All hardener DeltaBond 152 152-1B Bi-Pack (1 oz) Included in P/N 152-1 B (B-4) Type part numbers 152-KA Kit (7 oz Resin, 0.5 oz Hardener) lncluded in P/N 152-KA A-4, B-4 152-Q 1 quart (4 lbs) A-4 (0.316 lb), B-4 (0.14 lb), (order 1 only) NOTES: * Since the hardener/resin reaction is exothermic, it is important that batch size be matched to hardener speed. Working times given are for approximate batch sizes: A200 gms, B200 gms. Larger batch sizes will greatly reduce working time. ** For optimum electrical properties, dry parts for 15 minutes at 150F (65C) or 30 minutes at 75F (24C) to slowly evaporate the thinner and then final cure for 4 hours at 275F (135C). After initial cure, material may be handled, removed from fixture, etc., but has not yet achieved full properties and should be room temperature aged or post-cured as shown to achieve full physical and electrical properties. After initial cure, material may be brought to full physical and electrical properties during post-cure or may be room temperature aged for charted length of time to achieve same full properties. The information contained herein is based on data believed to be reliable but we do not assume responsibility for accuracy. All such information is used at the customer s own risk, conditions of use being beyond our control. 65

Tariff Desc

8547.9 TC 8535449 SHEETING OR SHAPES, electrically insulating, thermally conductive,
being combinations of two OR more of the following:
(a) silicone rubber;
(b) glass fibre;
(c) boron nitride;
(d) polyimide;
(e) copper
Wakefield Engineering
WAKEFIELD SOLUTIONS
WAKEFIELD THERMAL
Wakefield Thermal Solutions
Wakefield Thermal Solutions, Inc.
Wakefield-Vette
Wakefield-Vette, Inc
C5268-4 Fuse Holder Retailer and wholesaler in India, USA, Australia image

Oct 17, 2024
The C5268-4 Fuse Holder , manufactured by Eaton , is a robust 100A fuse base with a 1-inch stud designed for high-current applications. Available from Xon Electronic , this fuse holder provides reliable protection for industrial machinery, automotive systems, renewable energy setups, marine appl
045-6 AC Power Entry Modules by PCE wholesaler in India, USA image

Nov 15, 2024
The 045-6 AC Power Entry Module by PCE is designed for 3-phase power supply applications, supporting 125A and 400VAC. This robust male plug connector complies with IEC 60309, ensuring safe and reliable operation for industrial and commercial use. Ideal for industries requiring high power distributi
84-5020.0020 Emergency Stop Switches / E-Stop Switches by EAO image

Nov 21, 2024
The EAO 84-5020.0020 Emergency Stop Switch is a 22.5mm, panel-mounted E-Stop switch designed for industrial safety. Featuring a 1 N.C. (normally closed) contact configuration, it immediately halts machinery operations during emergencies, ensuring protection against accidents. This ISO 13850-compl
CBB60A-40/450 SR Passives Motor Start and Run Capacitors image

Oct 30, 2024
Explore the versatile CBB60A-40/450 SR Passives Motor Start and Run Capacitors, engineered to enhance motor performance in both industrial and domestic applications across the USA, India, Australia, Europe, and beyond. With a 40µF capacitance, 450V rating, and temperature resilience from -25°C to 7

Looking for help? Visit our FAQ's Section to answer to all your questions

 

X-ON Worldwide Electronics

Welcome To X-ON Electronics
For over three decades, we have been advocating and shaping the electronic components industry. Our management complements our worldwide business scope and focus. We are committed to innovation, backed by a strong business foundation. If you need a trustworthy supplier of electronic components for your business – look no further.
 

Copyright ©2024  X-ON Electronics Services. All rights reserved.
Please ensure you have read and understood our Terms & Conditions before purchasing. All prices exclude GST.

Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted Image for all the cards that are accepted AS9120 Certified