FIXED THICK FILM CHIP RESISTORS RECTANGULAR TYPE & LOW OHM KAMAYA OHM RLC Features 1. Most suitable for a detection of current in power source circuits, motor circuits, etc. 2. Raised Rated dissipation compared with RMC (except 2010,2512 size). 3. Please contact KAMAYA for Halogen and Antimony free product of RLC series. 4. Stability Class : 5% Dimensions L Rated resistance is marked with 4-digit on the over coating. (RLC20~RLC63) cc RLC10 : only No marking is available. Please contact KAMAYA for marking of RLC16. dd Unit : mm Style Metric Inch L W Hc d *Unit weight/pc. 0.05 0.6mg RLC10 1005 0402 1.0 0.05 0.5 0.05 0.35 0.05 0.2 0.1 0.25 0.10 0.15 RLC16 1608 0603 1.6 0.1 0.8 0.45 0.10 0.3 0.1 0.3 0.1 2mg 0.05 RLC20 2012 0805 2.0 0.15 1.25 0.10 0.6 0.1 0.4 0.2 0.4 0.2 5mg 0.2 RLC32 3216 1206 3.1 0.2 1.6 0.15 0.6 0.1 0.5 0.25 0.3 9mg 0.1 0.2 RLC35 3225 1210 3.1 0.2 2.5 0.15 0.6 0.15 0.5 0.25 0.3 16mg 0.1 RLC50 5025 2010 5.0 0.2 2.5 0.15 0.6 0.15 0.6 0.2 0.6 0.2 25mg RLC63 6332 2512 6.3 0.2 3.2 0.15 0.6 0.15 0.6 0.2 0.6 0.2 40mg *Values for reference Part Number Description Example Style RLC 32 K R470 F TP Product Type Rated Resistance * Packaging & Standard Qty. (Min.) B Bulk (Loose Package) 1,000pcs. e.g.: R050=50m ohm All Styles Size R100=100m ohm TH Paper Tape(2mm pitch) 10,000pcs. RLC10 1R00=1 ohm Code Metric Inch RLC16 100=10 ohm 10 1005 0402 TP Paper Tape 5,000pcs. RLC20 16 1608 0603 RLC32 Temperature Coefficient of Resistance 20 2012 0805 Tolerance on Rated Resistance -6 RLC35 K 100 10 /C 32 3216 1206 TE Embossed Tape 4,000pcs. F 1% RLC50 -6 0 200 10 /C RLC63 35 3225 1210 G 2% -6 0 250 10 /C *Refer to Tape and Packaging information on pages 54 and 55. 50 5025 2010 J 5% -6 63 6332 2512 0 300 10 /C Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 16 H WKAMAYA OHM FIXED THICK FILM CHIP RESISTORS RECTANGULAR TYPE & LOW OHM RLC Ratings Combinations of Rated Resistance Range,Temperature Size Rated Dissipation Rated Current Rated Isolation Category Temperature Coefficient of Resistance and Tolerance on Rated Resistance Range at 70C Range Resistance Voltage Style Metric Rated Resistance Tolerance on Temperature Coefficient -6 W A Range V C (Inch) of Resistance 10 /C Range Rated Resistance 100m 220m J 0 300 240m 430m F, J 1005 RLC10 0.125 0.11 1.11 100m 10 (0402) 470m 3.3 F, G, J 0 200 3.6 10 F, J 100 100 100m 180m F, G, J 0 250 200m 430m F, G, J 1608 0 200 RLC16 0.25 0.14 1.58 100m 10 (0603) 470m 3.3 F, G, J 100 3.6 10 F, J 55 125 2012 50m 180m F, G, J 0 250 0.15 2.56 RLC20 0.33 (0805) 200m 430m F, G, J 0 200 50m 10 470m 3.3 F, G, J 3216 100 RLC32 0.5 0.18 3.16 (1206) 3.6 10 F, J 500 3225 RLC35 0.66 0.44 3.63 (1210) 50m 180m F, G, J 0 250 5025 200m 430m F, G, J 0 200 RLC50 0.75 0.47 3.87 (2010) 50m 3.3 470m 3.3 F, G, J 100 6332 RLC63 1.0 0.55 4.47 (2512) Note1. Rated Current = (Rated Dissipation)/(Rated Resistance) Note2. Rated Voltage = (Rated Dissipation)(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) 1 2 Note3. Limiting Element Voltage* is set up on RLC16, 20, 32 and rated current is not applied in the range of following rated of Resistance* . *1 RLC16=1.41V, RLC20=1.58V, RLC32=1.81V *2 RLC16 and RLC20 7.5 R , RLC32 6.2 R The Rated Current in the above range of the Rated Resistance Value is calculated as below way. Rated Current=Limiting Element Voltage/Rated Resistance Derating Curve Climatic Category Surface Temperature Rise (Reference) The derated values of dissipation for temperatures 55/125/56 140 Mesurement Point RLC63 in excess of 70C shall be indicated by the following Curve. Lower Category Temperature 55C 120 RLC50 100 Upper Category Temperature +125C 100 Duration of the Damp heat, Steady-State Test 56 days 80 RLC35 60 RLC32 RLC20 Area of recommended operation 40 RLC16 20 RLC10 0 0 55 70 125 Ambient Temperature (C) 025 50 75 100 Rated Power Ratio(%) *Because values are different, please contact Kamaya salesdepartment for the details about deployment condition and terms of use. Rated Resistance Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code Resistance Code 50m R050 82m R082 200m R200 430m R430 750m R750 1.6 1R60 4.3 4R30 51m R051 90m R090 220m R220 470m R470 800m R800 1.8 1R80 4.7 4R70 56m R056 91m R091 240m R240 500m R500 820m R820 2.0 2R00 5.1 5R10 60m R060 100m R100 250m R250 510m R510 900m R900 2.2 2R20 5.6 5R60 62m R062 110m R110 270m R270 560m R560 910m R910 2.4 2R40 6.2 6R20 65m R065 120m R120 300m R300 600m R600 1.0 1R00 2.7 2R70 6.8 6R80 68m R068 130m R130 330m R330 620m R620 1.1 1R10 3.0 3R00 7.5 7R50 70m R070 150m R150 360m R360 650m R650 1.2 1R20 3.3 3R30 8.2 8R20 75m R075 160m R160 390m R390 680m R680 1.3 1R30 3.6 3R60 9.1 9R10 80m R080 180m R180 400m R400 700m R700 1.5 1R50 3.9 3R90 10 100 Note3. Other nominal resistances values are also available, please contact KAMAYA for further information. Performance Characteristics JIS C 5201-1 : 1998 Description Requirements Test Methods No breakdown or flashover Clause 4.7 RLC10,16 100Va.c.,60s Voltage proof R 1G ohm RLC2063 500Va.c.,60s Variation of resistance with temperature See Ratings Table Clause 4.8 Measuring temperature : +20C/+125C/+20C R 1% The applied voltage shall be 2.5 times of Rated Clause 4.13 Overload No visible damage, legible marking Voltage, or equivalent current 2s. Solderability In accordance with Clause 4.17.4.5 Clause 4.17 235C, 2s Clause 4.18 After immersion into the flux, the immersion into solder Resistance to soldering heat R 1% shall be carried out in Solder bath at 260C for 5s. Rapid change of temperature R 1% No visible damage Clause 4.19 5 cycles between 55C and +125C. Dry/Damp heat(12+12h cycle), first cycle/ Clause 4.23 Climatic sequence Cold/Damp heat(12+12h cycle), remaining R 5% No visible damage cycle./ D.C.Load. Damp test, steady state R 5% No visible damage, legible marking Clause 4.24 40C, 95%R.H., 56 days, test a) of Clause 4.24.2.1 Endurance at 70C R 5% No visible damage Clause 4.25.1 Rated current, 1.5hO, 0.5hOF, 70C, 1,000h. Endurance at the upper category temperature R 5% No visible damage Clause 4.25.3 125C, no-load, 1,000h. Adhesion No visible damage Clause 4.32 5N, 10s RLC10~35 Amount of bend : 3 mm Bend strength of the face plating R 1% Clause 4.33 RLC50, 63 Amount of bend : 1 mm Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 17 Percentage of the rated dissipation(%) Surface Temp Rise ( )