Data sheet... Weidmller Interface GmbH & Co. KG SAK terminal with screw connection Klingenbergstrae 16 SAK 4/35 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com The Weidmller SAK feed-through terminals satisfy the requirements of IEC 60947-1 and are available with rated cross-sections from 0.08 mm to 240 mm. General ordering data Order No. 0443660000 Type SAK 4/35 Version SAK terminal with screw connection, Feed- through terminal, Rated cross-section: 4 mm, Screw connection, Direct mounting GTIN (EAN) 4008190019990 Qty. 100 pc(s). Creation date May 30, 2012 9:37:19 AM CEST Catalogue status 14.04.2012 / We reserve the right to make technical changes. 1Data sheet... Weidmller Interface GmbH & Co. KG SAK terminal with screw connection Klingenbergstrae 16 SAK 4/35 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-2083 www.weidmueller.com Technical data Dimensions Length 45 mm Width 6.5 mm Height 44 mm Height of lowest version 44 mm Net weight 8.6 g Temperatures Operating temperature Storage temperature Continuous operating temp., min. -50 C Continuous operating temp., max. 100 C Rated data IECEx/ATEX Certificate No. (ATEX) KEMA97ATEX1798U ATEX certificate IECEXKEM06.0014U ATEX certificate KEMA97ATEX1798U e.pdf Certificate No. (IECEX) IECEXKEM06.0014U IEC Ex certificate IECEXKEM06.0014U e.pdf max. voltage 550 V Current (ATEX) 28 A Wire cross section max. (ATEX) 4 mm max. voltage 550 V Current (IECEX) 28 A Wire cross section max. (IECEX) 4 mm Voltage, cross-connection CrossConnectionGuide.pdf Operating temperature range For operating temperature Marking EN 60079-7 range see EC Design Test Certificate / IEC Ex- Certificate of Conformity Ex e II Marking ATEX Directive 94/9/EC II 2 G D Additional technical data Explosion-tested version Yes Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Snap-on Version Double terminal CSA ratings data Certificate No. (CSA) 12400-129 Voltage size C (CSA) 600 V Current size C (CSA) 36 A Wire cross section max. (CSA) 10 AWG Wire cross section min. (CSA) 26 AWG Clampable wires (additional connection) Conductor cross-section, flexible plus Conductor cross-section, flexible plus plastic collar DIN 46228/1, further plastic collar DIN 46228/1, further connection, min. 0.5 mm connection, max. 4 mm Creation date May 30, 2012 9:37:19 AM CEST Catalogue status 14.04.2012 / We reserve the right to make technical changes. 2