Product catalogue Terminals Screwing technology SAK-series modular terminals TS 35 Polyamide PA 6.6 Modular PE terminals General ordering data Order No. 0661160000 Part designation EK 4/35 Version Earth terminal, 4 mm, Screw connection, PA 66, green/yellow, TS 35 EAN 4008190038823 Qty. 100 pc(s). Additional technical data Colour of insulating material green/yellow Connection direction on side End plate required No Explosion-tested versionEx No Installation advice TS 35 Insulating material PA 66 Levels cross-connected internally No No. of identical terminals 1 No. of levels 1 No. of terminal strips per level 2 Open sides closed Operating temperature range - 50 C, + 100 C Product family SAK Series Type of connection Screwed Type of mounting Screwed UL 94 flammability rating of insulation material V2 Version PE terminal CSA rating data Min. cross-section (CSA) AWG 26 Max. cross-section (CSA) AWG 10 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm Flexible with ferrule, max. (DIN 46228 pt 1) 4 mm Conductors for clamping (rated connection) Clamping range, min. 0.33 mm Clamping range, max. 6 mm Type of connection Screw connection 2nd type of connection screwed - 1 -Product catalogue Terminals Screwing technology SAK-series modular terminals TS 35 Polyamide PA 6.6 Modular PE terminals Conductors for clamping (rated connection) Connection direction on side No. of connections 1 Stripping length 12 mm Clamping screw M 3 Blade size 0.6 x 3.5 mm Tightening torque range 0.5...1.0 Nm Gauge to IEC 60947-1 A4 Solid, min. 0.5 mm Solid, max. 6 mm Stranded, min. 0.5 mm Stranded, max. 4 mm Flexible, min. 0.5 mm Flexible, max. 4 mm Flexible with ferrule, min. (DIN 46228/1) 0.5 mm Flexible with ferrule, max. (DIN 46228/1) 4 mm AWG conductor size, min. AWG 22 AWG conductor size, max. AWG 14 AWG conductor size, min. 0.33 mm AWG conductor size, max. 5.26 mm Dimensions Width 6.5 mm Height of lowest version 44 mm Length 56.5 mm TS 32 offset 4 mm TS 35 offset 28.5 mm PE rating data Centre screw on PE terminals M 3 PEN function No Pollution severity 3 Rated cross-section 4 mm Rated impulse withstand voltage to adjacent 8 kV terminal Rated short-time current 720 A (6 mm) Rated voltage for adjacent terminal 800 V Standards IEC 60947-7-2 Tightening torque range for fixing screw 0.5...1.0 Nm Rating data Rated cross-section 4 mm Standards IEC 60947-7-2 Pollution severity 3 UL rating data Min. cross-section (UL) AWG 22 Max. cross-section (UL) AWG 12 - 2 -